Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,345 free GLB models
Under-bar bottle step (Bar, Pub and Brewery Taproom)
A 700 mm three tier stainless bottle step: stepped shelves with lipped fronts on folded end cheeks, on a slotted base tray.
Two tier speed rail (Bar, Pub and Brewery Taproom)
A 620 mm two tier bottle speed rail: folded stainless channels with lipped fronts on stepped brackets and a clamp plate that hooks over the bar front.
AnimatedUnder-bar ice well (Bar, Pub and Brewery Taproom)
A 560 mm insulated ice well on a stainless leg frame: a deck plate with a real aperture, a deep pressed pan with bottle dividers standing in it, an undershelf and a hinged insulated lid with a lift handle.
AnimatedUndercounter keg fridge (Bar, Pub and Brewery Taproom)
A 620 mm undercounter keg fridge: an insulated solid door on barrel hinges, a thermostat fascia, a font mounting boss and a lagged python gland rising from the top deck.
AnimatedUndercounter bottle fridge (Bar, Pub and Brewery Taproom)
A 920 mm undercounter bottle fridge: two glazed doors on barrel hinges with full-height bar handles, three lipped wire shelves inside and a louvred condenser grille under the top deck.
Condiment and garnish rail (Bar, Pub and Brewery Taproom)
A counter-mounted garnish rail: a stainless frame with four divided openings, four tapered garnish pots with rolled rims and a pair of clamp brackets under the bar top.
AnimatedUndercounter glass washer (Bar, Pub and Brewery Taproom)
A 460 mm undercounter glass washer: a chamfered stainless case on adjustable bullet feet with a recessed kick, a drop-front door with a round inspection port and grab handle, and a recessed control fascia with dials and indicator lamps.
Bar drip tray run (Bar, Pub and Brewery Taproom)
A 620 mm stainless drip tray: a pressed pan with a rolled flange, a removable slatted grid, a glass rinse jet and a waste spigot underneath.
Bar canopy with glass rack (Bar, Pub and Brewery Taproom)
An overhead bar canopy: five lipped stemware rails and a brass downlight strip under a boxed timber soffit with a moulded cornice, carried on four drop rods with domed ceiling plates.
Bar top section with bullnose (Bar, Pub and Brewery Taproom)
A loose 1.2 m bar top section: a postformed slab with a full bullnose nosing bead along the customer edge, a brass edge strip and the bearer rails on its underside.
Brass foot rail run (Bar, Pub and Brewery Taproom)
A 1.2 m brass foot rail on three turned stanchions with rubber floor pads, the run that goes along the base of a bar front.
AnimatedBar counter end with lift flap (Bar, Pub and Brewery Taproom)
The service end of a bar counter: a panelled half with a fixed bar top, a turned newel post and a hinged bar-top leaf over an open passage with a slatted swing gate below.
Bar counter corner (Bar, Pub and Brewery Taproom)
A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.
AnimatedBar counter till position (Bar, Pub and Brewery Taproom)
A counter module built as the till position: a stainless plinth carrying a tilted touch terminal and a card reader, a docket spike and a cash drawer under the bar top.
Bar waiter station module (Bar, Pub and Brewery Taproom)
A counter module set up as the waiter station: a stainless tray shelf inside the bar, a docket rail on posts with blank order slips, a stack of round drinks trays and a divided condiment box.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use.
Bar front panelling section (Bar, Pub and Brewery Taproom)
A 1.2 m loose section of bar front panelling: a dark skirting plinth, three bevelled fielded panels in a rail and stile frame, corner stiles and a moulded capping rail.
Bar service hatch module (Bar, Pub and Brewery Taproom)
A counter module closed off with a snug service hatch: turned posts carrying an arched voussoir head, a shelf across the opening and a slatted roller shutter drawn down behind it.
Weigh-In Scale (Martial Arts Dojo and Fight Stages)
Platform scale with a column and a blank dial head.
Medical Table (Martial Arts Dojo and Fight Stages)
Wheeled treatment table with a raised head end and a kit box.
Ring Bell (Martial Arts Dojo and Fight Stages)
Brass ring bell on a timber stand with a striker.
Shoe Rack (Martial Arts Dojo and Fight Stages)
Four-tier timber shoe rack with paired shoes.
Changing Cubicle (Martial Arts Dojo and Fight Stages)
Small three-sided changing cubicle with a curtain and shelf.