Free models · Game-ready GLB
Weapons tools
Every modern weapons tool below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole weapons tools set from the packs.
423 free GLB models
Cooperage Anvil and Croze (Distillery and Bonded Warehouse)
Cooper’s working set on a 1.3 x 0.9 m footprint: a hooped oak block carrying a stake anvil with its horn, a croze with its fence and cutter laid on a low bench beside it, and a hand adze leaning against the block. Static tools; nothing here moves.
Bung Mallet and Driver (Distillery and Bonded Warehouse)
Cooper’s bung mallet and hoop driver on a 1.1 x 0.8 m footprint: a turned oak mallet head on its handle lying on the floor, an iron driver beside it and three spare bungs. Small floor dressing for a filling store or a cooperage.
Divot Fork Rack (Racecourse and Parade Ring)
A 1.1 m divot fork rack holding eight timber handled forks tines down in a steel frame, for the ground staff stand beside a track.
AnimatedGround Staff Barrow (Racecourse and Parade Ring)
A 1.9 m ground staff barrow with a green tipping pan, steel handles and a single front wheel that turns, loaded with a bag of loam and a fork.
Balloon Fan Guard Cage (Hot Air Balloon Festival)
A spare wire guard cage for an inflation fan: a 1.04 m hoop with an inner ring and radial spokes, on a flat foot so it stands on its own.
AnimatedBalloon Inflation Fan (Hot Air Balloon Festival)
A petrol inflation fan on its tubular frame: four bladed fan on its own node, wire guard cage, engine, exhaust, fuel tank, handle bar and rubber feet, for blowing cold air into an envelope.
AnimatedSpare Balloon Burner Unit (Hot Air Balloon Festival)
A spare twin burner unit on its transport stand, with gimbal frame, brass vaporising coils, jets, manifold and blast valve levers, unlit and ready to swap onto a load frame.
Hand tool rack (Vertical Farm and Hydroponics Tower)
A wall mounted stainless tool rack: harvest knives in their sheaths, two pairs of snips, a scrub brush, a spacing dibber board and a shadow board behind, with a sanitising dip pot on the shelf.
Winch handle rack (Marina and Yacht Club)
Club winch handle rack 1.2 m wide: a teak board with eight numbered pockets left blank, six handles in place, a shelf of shackle keys and a lower rail of tail bags, for the bottom of a clubhouse stair.
Outboard motor on a stand (Marina and Yacht Club)
Portable outboard on a galvanised service stand: a charcoal cowling and leg with a trim bracket, propeller and skeg clamped to a padded transom board, with a fuel can and a drip tray at its foot. No maker marks anywhere.
Rigging bench (Marina and Yacht Club)
Yard rigging bench 2.4 m long: a timber top on a steel frame with a vice, a swage press, bins of shackles and thimbles, a coil of wire, a splicing fid set and a lower shelf of tools, for making up rigging in a boat yard.
AnimatedTrack Pump (Velodrome and Track Cycling)
A floor standing track pump 1.25 m tall: a weighted foot with a step plate, a steel barrel with a yellow collar, a pressure dial and a T handle that is a named node and strokes down the barrel. The hose is a solid strip and does not move.
High pressure washer (Shipyard and Dry Dock)
A trailer framed high pressure washing set: a pump and motor under a hinged cover, a water tank, a lance in its clip, a hose reel of high pressure line and a drain hose coiled on the frame, for washing off a hull.
Mobile shot blast unit (Shipyard and Dry Dock)
A wheeled abrasive blast pot with a pressure vessel, a remote control handle, a hose reel of blast line, a nozzle in its rack and a bag of grit on the frame, for preparing a hull before paint.
Airless paint spray rig (Shipyard and Dry Dock)
A skid mounted airless spray rig: a pump on a wheeled frame, two 200 litre paint drums in a bund, a hose reel of spray line, a spray gun in its holster and a blank drum label panel, for coating a hull in a dock.
AnimatedPedestal grinding station (Shipyard and Dry Dock)
A double ended pedestal grinder on a cast base with wheel guards, tool rests, eye shields and a spark tray, beside a steel topped stand with abrasive discs and a chipping hammer on it. The wheel turns.
Welding set with torch and leads (Shipyard and Dry Dock)
A wheeled inverter welding set with a wire feed unit on top, a gas bottle strapped to the back, a torch hung on the handle and the earth clamp and leads coiled over the barrow, for a fabrication bay.
AnimatedProfile cutting table (Shipyard and Dry Dock)
A 4 m by 2 m downdraught cutting table with a slatted bed, a bridge gantry on rails carrying the torch head and its height sensor, a drive cabinet and a swing arm control screen. The gantry traverses the table.
AnimatedHydraulic press brake (Shipyard and Dry Dock)
A 3 m hydraulic press brake: a welded C frame with two ram cylinders, a punch on the descending beam, a vee die in the bed, a back gauge behind and a foot control on a lead. The ram strokes down and back up.
AnimatedThree roll plate bending machine (Shipyard and Dry Dock)
A pyramid plate roller 2.6 m between housings: two driven bottom rolls, a pinching top roll, a geared drive end, a drop end for releasing a rolled shell and a pedestal control station. All three rolls turn.
Knife rack (Fish Market and Trawler Quay)
A wall mounted magnetic rail carrying five filleting knives of different lengths and a sharpening steel, each hanging by its handle, with a bracket at each end of the rail.
AnimatedFirewater hose reel (Offshore Oil Rig and Platform)
A firewater hose reel in its frame: a drum between two flanges on a shaft, the swivel inlet and outlet, and a blank instruction plate on the frame. The drum turns.
AnimatedDeck fire monitor (Offshore Oil Rig and Platform)
A deck fire monitor: a firewater riser on a base plate carrying an oscillating water and foam gun with its nozzle and aiming bar, plus the isolating valve box and the supply line. The gun traverses its arc.
AnimatedIron roughneck (Offshore Oil Rig and Platform)
The iron roughneck: a column on a floor track carrying the spinner and torque wrench head with its jaw housing, plus a blank operator panel on a bracket. The head reaches in toward the well centre and back.