Free models · CC0
Weapons tools
Every weapons tool below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole weapons tools set from the packs.
125 free GLB models
Twelve-point crampons, pair (Mountaineering and Summit Expedition)
Pair of step-in twelve-point crampons with front points, toe bail, heel lever and retaining straps.
Technical ice tools, pair (Mountaineering and Summit Expedition)
Matched pair of bent-shaft technical tools, one with a hammer and one with an adze, with grip rests.
Mountaineering ice axe (Mountaineering and Summit Expedition)
Classic 66 cm walking axe with a curved toothed pick, adze, moulded grip, spike and a wrist leash.
Ice screw cluster (Mountaineering and Summit Expedition)
Five tubular ice screws of graded length racked on a karabiner with a sling.
Board tuning vice (Snowboard Gear and Freestyle Riders)
Three-point board tuning vice on a heavy stand, with two edge jaws, a centre support and a base clamp handle.
Edge tuning tool set (Snowboard Gear and Freestyle Riders)
Edge tuning set laid out flat: a file guide, two files, two diamond stones, a gummy stone and a scraper.
Snow saw (Backcountry Snowboarding and Avalanche Safety)
Toothed snow saw with an aggressive tooth run along one edge, a squared nose and a moulded pistol grip.
Avalanche probe (Backcountry Snowboarding and Avalanche Safety)
Assembled 2.4 m probe with depth bands and a tensioning heel, shown next to a second probe folded into its sections.
Avalanche shovel (Backcountry Snowboarding and Avalanche Safety)
Metal bladed avalanche shovel with a dished blade, foot platform, telescopic oval shaft and a D grip.
Touring poles, pair (Backcountry Snowboarding and Avalanche Safety)
Pair of two-section adjustable touring poles with locking collars, moulded grips, straps and powder baskets.
Cask tap and mallet (Bar, Pub and Brewery Taproom)
A cellar tapping set: a brass cask tap with a shouldered barrel, a key lever and a spout, laid beside a turned beech mallet with a shaped handle.
Long handled tool bin (Garden Centre and Florist)
A floor bin of long handled tools: a ring topped steel stand holding six spades, forks, rakes and hoes leaning at random, with a blank price flag on the rim.
Hand tool set on a tray (Garden Centre and Florist)
A merchandised hand tool set on a steel tray: a trowel, a hand fork, a weeding knife and a pair of bypass secateurs, each with a moulded grip and a hanging eye.
Long handled tool wall bay (Garden Centre and Florist)
A merchandising bay of long handled garden tools: a slatted timber back panel on a steel frame with a shaft rail and heel bar, holding a spade, digging fork, rake and hoe.
Window cleaning kit (Laundrette and Cleaning Services)
A window cleaning kit: a strip bucket with a bail handle and scrubber rail, a squeegee and a washer sleeve standing in it, and a two section telescopic pole with clamp collars lying alongside.
Dough scraper set (Cafe, Bakery and Coffee Bar)
A bakery scraper set on a timber board: a steel bench scraper with a moulded grip, a curved plastic bowl scraper and a lame with a turned handle and a blade.
Baker peel set on rack (Cafe, Bakery and Coffee Bar)
A wall rack of three baker peels: one rectangular blade and two round blades on turned timber shafts with rolled grips, leaning in a timber cradle.
Screwdriver set on hooks (Hardware Store and DIY Warehouse)
A hanging set of six screwdrivers: bi material handles with hex bolsters and blades of four lengths, each carded and hung from a peg hook rail.
Tape measure (Hardware Store and DIY Warehouse)
A 5 m tape measure: a rubber over moulded case with a belt clip, a thumb lock and a hooked blade pulled a little way out of the mouth.
Spirit level (Hardware Store and DIY Warehouse)
A 1.2 m box section spirit level: an extruded aluminium body with milled hand holes, rubber end caps and three vial windows with fluid tubes.
Adjustable spanner (Hardware Store and DIY Warehouse)
A 250 mm adjustable spanner: a forged handle with a knurled adjuster worm, a sliding lower jaw and a fixed upper jaw, lying flat.
Hand saw (Hardware Store and DIY Warehouse)
A 550 mm hand saw: a tapered toothed blade with a stiffened back, a riveted moulded pistol handle and a hang hole, lying flat.
Claw hammer (Hardware Store and DIY Warehouse)
A 450 g claw hammer: a forged head with a domed face and a curved split claw on a shaped shaft with a moulded grip and a lanyard hole.
Sliding mitre saw (Hardware Store and DIY Warehouse)
A sliding mitre saw on its base: a rotating table with a fence and mitre scale, twin slide rails, a pivoting saw head with a blade guard, a motor barrel and a dust bag.