Free models · Game-ready GLB
Vehicles
Every vehicle below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole vehicles set from the packs.
85 free GLB models
Second Stage (Rocket Launch Pad and Gantry)
A 12.3 m second stage: a 3.3 m tank on a conical adapter down to the core diameter, one vacuum engine bell on its thrust block, a raceway, four attitude thruster pods and a payload interface ring on top.
Interstage (Rocket Launch Pad and Gantry)
A 3.6 m interstage barrel joining the two stages: the same 3.8 m hull, a reinforcing ring at each end, eight separation vent ports, a raceway continuation and an invented marking band.
First Stage Core (Rocket Launch Pad and Gantry)
A 24 m first stage core, 3.8 m across: a white tank barrel with a dividing ring, an aft skirt on eight thrust posts, a cable raceway with junction boxes up one flank, an umbilical plate and invented block markings. Ported base and top.
Hull section, stern with transom (Shipyard and Dry Dock)
The after 10 m of a 9 m beam hull: a rising run, a flat transom, a deadwood skeg and a stern tube boss cut for a shaft, with a bulwarked poop and a bare primer section face forward so it bolts to a midbody module.
Hull section, bow with bulbous forefoot (Shipyard and Dry Dock)
The forward 13 m of a 9 m beam hull: a raked stem, flared blue topsides, a bulbous forefoot in antifouling red, a bulwarked forecastle with bitts and a bare primer section face aft so it bolts to a midbody module.
Hull section, parallel midbody (Shipyard and Dry Dock)
A 10 m midbody section of a 9 m beam hull: plated shell in antifouling red below the waterline and blue topside above, a decked bulwark with a hatch and mooring bitts, and bare primer section faces at both ends so modules bolt end to end.
Steel trawler stern section with slipway (Fish Market and Trawler Quay)
The after 7 m of the hull, built the way a stern trawler really is: the deck is split by an open slipway trough running up from a raked transom, with rubbing rollers down its cheeks, a bulkhead at its head and the gallows posts and towing beam over the quarters.
Steel trawler bow section (Fish Market and Trawler Quay)
The forward 7 m of a steel stern trawler, modelled from the waterline up: a raked stem with its stem band and bow roller, rising sheer, flared topsides, bulwarks with freeing ports, the windlass and warping ends, and a stowed anchor in its pocket.
Steel trawler midship section (Fish Market and Trawler Quay)
The 7 m midship of the same hull: parallel topsides with the boot topping and sheer stripe, bulwarks and capping rails both sides, pound coamings down the working deck and two deck sockets, ready to take the wheelhouse and the hold hatch.
Ammo Drum Pack (Mech Robots and Battle Hangar)
Medium ammunition drum pack: large belt drum over a base with a side feed chute.
Coolant Pack (Mech Robots and Battle Hangar)
Medium coolant pack: two vertical pressure tanks with a crossover pipe and a level indicator.
Missile Rack Pack (Mech Robots and Battle Hangar)
Medium vertical-launch missile rack with six hazard-capped cells.
Radar Mast Pack (Mech Robots and Battle Hangar)
Medium sensor mast pack: box base with a 2 m mast, flat panel array and beacon.
Jump Jet Pack (Mech Robots and Battle Hangar)
Thruster pack variant with four angled jump nozzles in side pods and a stabiliser bar.
Thruster Pack (Mech Robots and Battle Hangar)
Medium dorsal thruster pack with two flared rearward nozzles and heat shrouds.
Periscope Head (Mech Robots and Battle Hangar)
Low armoured head with a raised periscope sensor mast.
Visor Head (Mech Robots and Battle Hangar)
Light visor head with a wide glowing sensor band and cheek plates.
Dome Radar Head (Mech Robots and Battle Hangar)
Heavy radome head: faceted dome on a drum base with a top antenna stub.
Twin Optic Head (Mech Robots and Battle Hangar)
Medium head with paired square optics and twin whip antennae.
Mono Eye Head (Mech Robots and Battle Hangar)
Medium sensor head with a single wide optic under a brow plate and a short antenna.
Quad Arm (Mech Robots and Battle Hangar)
Heavy sponson gun pod for the quad walker with a pivoted short cannon.
Hopper Arm (Mech Robots and Battle Hangar)
Light angled claw arm for the hopper frame, three-talon gripper.
Loader Arm (Mech Robots and Battle Hangar)
Medium industrial clamp arm with hazard-striped upper arm, lift ram and a two-jaw clamp.
Assault Arm (Mech Robots and Battle Hangar)
Heavy armoured arm with a knuckle-plated fist.