Free models · Game-ready GLB
Roads infrastructure
Every stylized modern roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
185 free GLB models
Infield Floor Module (Velodrome and Track Cycling)
An 8 m square of the blue track centre floor, 0.12 m thick, with white marking tape along two edges. Edge ports on all four sides so the whole infield lays flat and continuous inside the apron.
Concourse Floor Module (Velodrome and Track Cycling)
An 8 m square of poured concourse floor, 0.12 m thick, with a saw cut joint crossing it. Edge ports on all four sides, so a plot lays as one continuous surface under the track and the seating.
Finish Line Plate (Velodrome and Track Cycling)
The finish line across the track: a 0.55 m overlay plate of ten black and white blocks running the full 6 m width, cut to the straights 13 degree camber so it lies flush on a straight module in front of the judges tower.
Pursuit Line Plate (Velodrome and Track Cycling)
The white pursuit line across the full 6 m width of the track, on a 0.5 m overlay plate cut to the same 13 degree camber. Two of these sit half a lap apart on opposite straights, which is where a pursuit starts and finishes.
Sprinters and Stayers Line Plate (Velodrome and Track Cycling)
An 8 m overlay plate carrying the three lines that run the length of the track: the white measurement line 0.2 m up from the inner edge, the red sprinters line at 1.05 m and the blue stayers line at 2.45 m. Cut to the straights 13 degree camber and laid on a straight module.
Track Apron Bend Module (Velodrome and Track Cycling)
The curved 30 degree length of the apron, cut to a 9.4 m inner radius so it closes round the ends of the track centre. The origin is the centre of the circle it is cut from.
Track Apron Module (Velodrome and Track Cycling)
An 8 m length of the flat concrete apron between the track centre and the cote d azur, 3 m wide and 0.35 m thick so its surface is level with the tracks inner edge. Ports at both ends.
Cote d'Azur Strip Module (Velodrome and Track Cycling)
The 0.6 m blue strip that runs round the inside of the racing surface, level with the apron and flush with the tracks inner edge. An 8 m straight length with ports at both ends.
Cote d'Azur Bend Module (Velodrome and Track Cycling)
The curved 30 degree length of the blue strip, cut to the same 13 m inner radius as the bend modules it sits against. The origin is the centre of the circle, so twelve of these close the two bends.
Banked Track Bend Module (Velodrome and Track Cycling)
A 30 degree segment of velodrome bend: 6 m of timber surface banked at a constant 42 degrees on a 13 m inner radius, carried on steel bents. The origin is the centre of the circle it is cut from, so four of these and two transitions turn a half lap.
Banked Track Transition Module (Velodrome and Track Cycling)
A 30 degree segment easing the bank from the straights 13 degrees to the bends 42 with a smoothstep, on the same 13 m inner radius and the same ports, so the track changes slope gradually instead of stepping between flat pieces set at angles.
Banked Track Transition Module (Mirrored) (Velodrome and Track Cycling)
The handed pair of the transition segment, easing from 42 degrees of bend back down to the 13 degree straight across its 30 degrees. A bend takes one of each, so the surface leaves and rejoins the straight at the same slope it arrives with.
Banked Track Straight Module (Velodrome and Track Cycling)
An 8 m straight of velodrome track, 6 m of timber surface banked at 13 degrees, standing on steel trestle bents with the inner edge on the floor. Ports at each end on the mid radius, so straights tile into the home and back straights of a lap.
Car Park Marking Tile (Dog Agility and Training Field)
A 4 m hardstanding tile in compacted earth with two marked bays and a head line, ported the same way as the grass tile so the club car park joins the field grid. Static.
Site Floodlight Column (Caravan Park and Campsite)
A 4.75 m galvanised lighting column on a concrete base with a blue collar and a single floodlight head aimed down the track. The lens is plain emissive free geometry: the pack ships no lights, so a consumer adds its own.
Entrance Barrier (Caravan Park and Campsite)
A 4.2 m site entrance barrier: a galvanised pedestal on a concrete base with a striped arm and a counterweight, and a drop leg under the far end. The arm is one node on the pedestal axis, so the clip tilts it up to let a tourer through and drops it again. The pedestal is fixed.
Chemical Disposal Point (Caravan Park and Campsite)
The chemical toilet emptying point: a concrete plinth carrying a glazed white chute with a hinged metal cover, a rinsing standpipe and a blue instruction sign. Static geometry; the cover is modelled closed.
Water Point (Caravan Park and Campsite)
A site water point: a galvanised standpipe on a concrete pad with a swan neck tap over a grated drain tray and a blue label. The tap and the water are fixed: a rigid node could turn a handle, but not the water it lets out, so the fitting is modelled shut.
Electric Hook Up Bollard (Caravan Park and Campsite)
A 1 m site electricity bollard on a concrete pad: a dark pedestal with a sloped weather top, two orange outlets under their cover and a blue label. Static geometry; the outlet covers are modelled shut.
Gravel Track Tile, Curve (Caravan Park and Campsite)
The quarter turn of the site road: the same 3 m gravel carriageway swept through ninety degrees inside one 6 m tile, entering at the west edge and leaving at the south edge, ported at both ends so it drops into a straight run.
Gravel Track Tile, Straight (Caravan Park and Campsite)
A 6 m ground tile with a 3 m gravel carriageway running across it and grass verges either side, ported at both ends of the track and on all four tile edges, so a run of them makes the site road through a field of pitches.
Hand Painted Site Noticeboard (Allotments and Community Garden)
A 1.8 m hand painted allotment noticeboard on two posts under a little pitched hood, with the site name lettered across the head and four notices pinned to it. The notices are painted geometry and cannot be changed at runtime.
Timber Fence Panel (Allotments and Community Garden)
A 2 m closeboard fence bay 1.15 m high: two posts, a gravel board, two arris rails and eleven feather edge boards. Run ports on both ends, so bays make a boundary of any length.
Chain Link Fence Panel (Allotments and Community Garden)
A 2 m galvanised chain link bay 1.15 m high on two posts with top and bottom straining wires and a raking stay. The mesh is rigid geometry and does not sag. Run ports on both ends.