Free models · Game-ready GLB
Roads infrastructure
Every realistic historical roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
52 free GLB models
Stone flag path module, 3 m (Botanical Glasshouse and Palm House)
Three metre length of flagged path 1.5 m wide, six worn limestone flags with open joints on a bedding course, ported both ends so a path runs the length of a glasshouse.
Cast iron grated floor section, 3 m (Botanical Glasshouse and Palm House)
Three metre section of cast iron floor grating 1.5 m wide in a rebated frame, the grille a palm house lays over its heating pipe trenches, ported both ends so the trench run continues.
Water Channel Runnel (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m water channel and runnel module for a desert mosque courtyard: a tiled cut with dressed kerbs, a still water surface and a stop at each joint.
Courtyard Paving Module (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m courtyard paving module for a desert mosque or madrasa kit: sixteen dressed flags in two stones on a bedding course.
Stepping Stone Path (Korean Hanok Village and Street)
A 3 m run of flat stepping stones bedded in earth with moss between them, the way across a yard or a wet corner.
Ondol Flue Run (Korean Hanok Village and Street)
A 3 m run of underfloor flue: a clay duct on a stone bed with removable cover slabs over it, the heat path from the firebox to the chimney.
Stepped Lane Module (Korean Hanok Village and Street)
A 3 m wide flight of four shallow stone steps with a rubble kerb each side, the way a village lane climbs a slope.
Stone Street Module (Korean Hanok Village and Street)
A 3 m square of village street laid in irregular stone setts on an earth bed, with the joints left open between them.
Courtyard Ground Module (Korean Hanok Village and Street)
A 3 m square of beaten earth madang, the swept yard a hanok stands round, with a few small stones bedded in the surface.
Wrestling Pit Kerb Run (Roman Bathhouse and Palaestra)
A 2 m kerb run for the edge of a wrestling pit: a tufa kerb with a travertine capping, timber pegs behind it and the sand banked up on the court side. Runs butt end to end round a sand pit or between the court and the paving.
Drain Channel Run (Roman Bathhouse and Palaestra)
A 2 m drain channel run: a mortar trough between travertine kerbs, 320 mm high and 560 mm wide, open along its length for the overflow off a pool or a wash down floor. Runs butt end to end.
Lead Pipe Run (Roman Bathhouse and Palaestra)
A 2 m run of folded lead water pipe on two travertine saddles, 150 mm in the bore, with a soldered seam along the top, bronze collars at both joints and a strap at each bearing. Runs butt end to end along a wall or a trench.
Drain Channel Run with Grate (Roman Bathhouse and Palaestra)
The same 2 m channel closed with a bronze bar grate on a lead frame, which is what a bather walks over. Same channel ports, so grated and open lengths run together.
Cobbled Street Module (Canal Town and Windmill)
Free 3D model of a cobbled street tile for a historical canal town kit: 4 m square of sunk granite setts on a bedding slab with a gutter channel.
Canal Duckboard Walkway (Canal Town and Windmill)
Free 3D model of a duckboard walkway module for a historical canal town kit: 3 m of planking on three bearers with edge rails.
AnimatedCanal Quay Crane (Canal Town and Windmill)
Free 3D model of a timber post crane for a historical canal quay kit: stone base, oak post and a braced jib with a sheave, hook and winch drum that slew together.
Canal Fender Piles (Canal Town and Windmill)
Free 3D model of canal fender piles with a rubbing timber for a historical quayside kit: three driven oak piles, iron hoops and three rope fenders.
AnimatedCanal Drawbridge (Canal Town and Windmill)
Free 3D model of a flat drawbridge with a counterweight beam for a historical canal town kit: the leaf lifts and the weighted balance beam swings with it.
AnimatedCanal Lock Gate Pair (Canal Town and Windmill)
Free 3D model of a mitred canal lock gate pair for a historical waterway kit: two planked oak leaves on heel posts with balance beams, both swinging.
Canal Stepped Landing (Canal Town and Windmill)
Free 3D model of a stepped stone canal landing for a historical canal town kit: seven treads down the quay face into the water, iron handrails and a mooring ring.
Canal Humpback Bridge (Canal Town and Windmill)
Free 3D model of a humpback brick canal bridge for a historical canal town kit: 10 m segmental arch with a stone voussoir ring, cobbled deck and brick parapets.
Canal Quay Edge (Canal Town and Windmill)
Free 3D model of a brick canal quay edge with mooring rings and a bollard for a historical canal town kit: 4 m module with a stone coping.
Boat Roller Slipway (Viking Age Longhouse and Longship)
Free 3D model of a Viking boat roller slipway section: greased log rollers between oak skids on stone footings, a 3 m module for hauling a hull ashore.
Quay Bollard Post (Pirate Port and Tall Ships)
A 1.4 m oak mooring bollard on a stone pad, iron banded top and bottom, with three turns of hawser round its base.