3DAssets.dev

Free models · Game-ready GLB

Roads infrastructure

Every realistic roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.

Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.

611 free GLB models

Overland conveyor module, 30 degree horizontal curve (Ore Processing and Haulage Plant)

Overland conveyor module, 30 degree horizontal curve (Ore Processing and Haulage Plant)

A 12 m conveyor module turning 30 degrees on a 22.9 m radius: curved stringers on braced bents set square to the arc, the troughed belt and idler frames rotated to follow the curve, and a curved walkway with handrails and a toe board on the outside of the turn.

@3dassets3.2k tris · 15 ↓
Conveyor gallery bridge, 12 m rising span (Ore Processing and Haulage Plant)

Conveyor gallery bridge, 12 m rising span (Ore Processing and Haulage Plant)

A 12 m conveyor gallery that climbs 3 m between transfer towers: the same braced through truss and sheeting with a rising bottom chord, stepped bearing shoes, the belt and idlers set on the slope and a climbing internal walkway.

@3dassets2.7k tris · 11 ↓
Overland conveyor module, 12 m straight (Ore Processing and Haulage Plant)

Overland conveyor module, 12 m straight (Ore Processing and Haulage Plant)

A 12 m level overland conveyor module: two stringers on braced trestle bents with longitudinal X bracing, a 1.2 m troughed belt on 35 degree three roll idlers, a return strand on flat idlers, and an access walkway on one side with handrails and a toe board.

@3dassets2.0k tris · 10 ↓
Overland conveyor module, 12 m incline (Ore Processing and Haulage Plant)

Overland conveyor module, 12 m incline (Ore Processing and Haulage Plant)

A 12 m conveyor module climbing 3 m at 14 degrees: taller braced trestle bents toward the high end, the same troughed belt and idler set, a climbing walkway with handrails and a toe board, and a holdback drive on a plinth beside the low end.

@3dassets3.0k tris · 15 ↓
Truck dump pocket (Ore Processing and Haulage Plant)

Truck dump pocket (Ore Processing and Haulage Plant)

A reinforced concrete truck dump pocket: back and wing retaining walls, a sloping pocket floor, cast wheel stops with hi-vis kerbs, a static grizzly grating over the mouth, a dust curtain of hanging rubber strips on a portal frame, crest handrails and an access stair.

@3dassets1.5k tris · 13 ↓
Reclamation Yard: Patched compound road

Reclamation Yard: Patched compound road

Four-metre concrete road tile with irregular repair plates, expansion joints and worn-colour edge marks.

@3dassets260 tris · 11 ↓
Reclamation Yard: Repaired road barricade

Reclamation Yard: Repaired road barricade

Two-metre concrete traffic barrier with tapered profile, lifting loops and bolted rust-colour repair strips.

@3dassets1.6k tris · 13 ↓
Reclamation Yard: Salvage compound gate

Reclamation Yard: Salvage compound gate

Four-metre gate frame with a clear entrance, welded header, warning panels and offset light mount.

@3dassets960 tris · 13 ↓
Signal House: Concrete drainage channel

Signal House: Concrete drainage channel

Two-metre grated rain channel with a concrete surround, recessed dark bed and closely spaced steel bars.

@3dassets348 tris · 14 ↓
Signal House: Relay security fence

Signal House: Relay security fence

Two-metre steel fence panel with narrow vertical bars, two rails and bolted ground plates.

@3dassets356 tris · 13 ↓
Signal House: Braced relay antenna mast

Signal House: Braced relay antenna mast

Six-metre lattice mast with cross braces, a ladder and twin directional antenna arrays.

@3dassets1.8k tris · 12 ↓