Free models · Game-ready GLB
Roads infrastructure
Every roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
648 free GLB models
Landing pad blast deflector wall (Moon Base Colony and Lunar Rovers)
A 6 m wide curved blast deflector for a landing pad rim: a battered concave wall on six raked buttresses that spread to 8.9 m, with ballast blocks and bearing pads, topped by five hazard markers.
Sintered landing pad (Moon Base Colony and Lunar Rovers)
A 14 m circular landing pad graded and sintered into the regolith: a raised apron with a sixteen-segment plate pattern, three concentric target rings and a centre bullseye, ringed by eight lit edge markers.
Cordon fence corner (UFO Crash Site and Recovery Facility)
A right-angle cordon corner turning a taped line through 90 degrees, with ports on the west and south arms.
Cordon fence run (UFO Crash Site and Recovery Facility)
A 4 m cordon run: three footed posts, two tubular rails, a taped line and a blank warning plate. Ports at both ends so runs chain.
Pad edge wind baffle (Hover Cars and Flying Vehicles)
A five metre curved wind baffle screen with six louvre slats, a lit top rail and splayed feet, for sheltering a landing pad edge.
Skylane direction gantry sign (Hover Cars and Flying Vehicles)
A five metre cantilever direction sign with a framed board, three lit legend bands, a chevron and an under-board lamp bar.
Kerbside drop-off module (Hover Cars and Flying Vehicles)
A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges.
Skylane air traffic gantry (Hover Cars and Flying Vehicles)
A thirteen metre span traffic gantry with a lattice cross beam, four signal heads, sensor pods and a lit lane band.
Hover parking stack frame (Hover Cars and Flying Vehicles)
A three level open parking stack frame with grid decks, edge guards, glowing bay strips and a head canopy.
Hover service bay with lift deck (Hover Cars and Flying Vehicles)
An open four column service bay with a scissor lift deck at 1.15 m, hazard guards, overhead light rails and a rear tool board.
Repulsor charging pylon (Hover Cars and Flying Vehicles)
A kerbside charging pylon with an inductive coil head, a swing boom and a drop coupler over the bay, plus a lit status panel.
Hover lane beacon, amber lane closure (Hover Cars and Flying Vehicles)
The lane beacon with an amber head instead of a cyan one, for marking a closed or diverted lane in the same row.
Hover craft docking cradle (Hover Cars and Flying Vehicles)
A splayed docking cradle whose padded saddle carries a parked hover craft at 1.15 m, with alignment guides and a service coupler column.
Hover lane beacon (Hover Cars and Flying Vehicles)
A four metre skylane beacon mast with a glowing coil ring head, sensor pod and weighted base.
Hover landing pad tile (Hover Cars and Flying Vehicles)
A six metre landing pad tile with concentric touchdown rings, a cross marking, edge approach lights and lane ports on all four edges.
Repulsor road plate, lane terminator (Hover Cars and Flying Vehicles)
The repulsor road plate closed off by a stop block with a warning bar and two lit posts, ending a lane run.
Repulsor road plate, quarter turn (Hover Cars and Flying Vehicles)
The repulsor road plate with its induction arcs swept through a quarter turn, joining a south lane port to an east one.
Repulsor road plate, four way (Hover Cars and Flying Vehicles)
The repulsor road plate as a four way junction with crossing induction arcs and a glowing conflict ring.
Repulsor road plate, straight (Hover Cars and Flying Vehicles)
A six metre square repulsor road plate with twin induction arcs, edge kerb light strips and lane ports on two edges.
Pit stall marking tile (Stock Car Oval Speedway)
Pit stall marking tile in an original colourful speedway family.
Start-finish speedway straight (Stock Car Oval Speedway)
Start-finish speedway straight in an original colourful speedway family.
Banked dirt oval turn (Stock Car Oval Speedway)
Banked dirt oval turn in an original colourful speedway family.
Dirt oval infield tile (Stock Car Oval Speedway)
Dirt oval infield tile in an original colourful speedway family.
Backstretch access tunnel (Stock Car Oval Speedway)
Backstretch access tunnel in an original colourful speedway family.