Free models · Game-ready GLB
Roads infrastructure
Every stylized roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
306 free GLB models
Infield Floor Module (Velodrome and Track Cycling)
An 8 m square of the blue track centre floor, 0.12 m thick, with white marking tape along two edges. Edge ports on all four sides so the whole infield lays flat and continuous inside the apron.
Concourse Floor Module (Velodrome and Track Cycling)
An 8 m square of poured concourse floor, 0.12 m thick, with a saw cut joint crossing it. Edge ports on all four sides, so a plot lays as one continuous surface under the track and the seating.
Finish Line Plate (Velodrome and Track Cycling)
The finish line across the track: a 0.55 m overlay plate of ten black and white blocks running the full 6 m width, cut to the straights 13 degree camber so it lies flush on a straight module in front of the judges tower.
Pursuit Line Plate (Velodrome and Track Cycling)
The white pursuit line across the full 6 m width of the track, on a 0.5 m overlay plate cut to the same 13 degree camber. Two of these sit half a lap apart on opposite straights, which is where a pursuit starts and finishes.
Sprinters and Stayers Line Plate (Velodrome and Track Cycling)
An 8 m overlay plate carrying the three lines that run the length of the track: the white measurement line 0.2 m up from the inner edge, the red sprinters line at 1.05 m and the blue stayers line at 2.45 m. Cut to the straights 13 degree camber and laid on a straight module.
Track Apron Bend Module (Velodrome and Track Cycling)
The curved 30 degree length of the apron, cut to a 9.4 m inner radius so it closes round the ends of the track centre. The origin is the centre of the circle it is cut from.
Track Apron Module (Velodrome and Track Cycling)
An 8 m length of the flat concrete apron between the track centre and the cote d azur, 3 m wide and 0.35 m thick so its surface is level with the tracks inner edge. Ports at both ends.
Cote d'Azur Strip Module (Velodrome and Track Cycling)
The 0.6 m blue strip that runs round the inside of the racing surface, level with the apron and flush with the tracks inner edge. An 8 m straight length with ports at both ends.
Cote d'Azur Bend Module (Velodrome and Track Cycling)
The curved 30 degree length of the blue strip, cut to the same 13 m inner radius as the bend modules it sits against. The origin is the centre of the circle, so twelve of these close the two bends.
Banked Track Bend Module (Velodrome and Track Cycling)
A 30 degree segment of velodrome bend: 6 m of timber surface banked at a constant 42 degrees on a 13 m inner radius, carried on steel bents. The origin is the centre of the circle it is cut from, so four of these and two transitions turn a half lap.
Banked Track Transition Module (Velodrome and Track Cycling)
A 30 degree segment easing the bank from the straights 13 degrees to the bends 42 with a smoothstep, on the same 13 m inner radius and the same ports, so the track changes slope gradually instead of stepping between flat pieces set at angles.
Banked Track Transition Module (Mirrored) (Velodrome and Track Cycling)
The handed pair of the transition segment, easing from 42 degrees of bend back down to the 13 degree straight across its 30 degrees. A bend takes one of each, so the surface leaves and rejoins the straight at the same slope it arrives with.
Banked Track Straight Module (Velodrome and Track Cycling)
An 8 m straight of velodrome track, 6 m of timber surface banked at 13 degrees, standing on steel trestle bents with the inner edge on the floor. Ports at each end on the mid radius, so straights tile into the home and back straights of a lap.
Stepping Stone Path (Imperial China Palace and Garden)
A run of seven irregular stepping stones set into gravel, 4 m long, for crossing a planted bed or the shallow edge of a pond.
Courtyard Paving Module (Imperial China Palace and Garden)
A 4 m square of courtyard paving: large dressed slabs with recessed joints and a worn stone finish, laid to a four way grid.
Terrace Step Flight (Imperial China Palace and Garden)
A five tread stone flight rising 1.15 m to terrace level, with a carved spirit ramp of abstract cloud scrolls between two runs of treads.
Terrace Platform Module (Imperial China Palace and Garden)
A 4 m square of raised stone terrace with a moulded plinth edge, for building a hall podium of any size.
Arched Stone Bridge (Imperial China Palace and Garden)
A single span humpbacked stone bridge with a voussoir arch, a stepped deck over it and a pierced balustrade down both parapets.
Cast mooring bollard (Steampunk Airship Dock and Workshop)
A 0.76 m cast bollard on a bolted plate, with a coil of rope at its foot.
Steel stair flight 2 m rise (Steampunk Airship Dock and Workshop)
A steel stair flight rising 2.0 m over a 2.4 m run, with chequer treads and handrails.
Caged access ladder (Steampunk Airship Dock and Workshop)
A 3.4 m caged access ladder with twelve rungs and bolted top and bottom plates.
Wheeled boarding stair (Steampunk Airship Dock and Workshop)
A wheeled boarding stair with eleven treads, twin handrails and a railed top platform at 2.5 m.
AnimatedSlewing jib crane (Steampunk Airship Dock and Workshop)
A 4.8 m column crane with a slewing jib, a 3.5 m reach and a hook block on the chain fall.
AnimatedDock gantry with travelling hoist (Steampunk Airship Dock and Workshop)
A 6.4 m portal gantry with a runway beam, a travelling trolley and a chain hung hook block.