Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,316 free GLB models
Old Bath Used as a Trough (Allotments and Community Garden)
A 1.5 m enamelled bath stood on four brick piers and planted up as a trough, 0.46 m to the rolled rim with the old tap hole still in the end. The bath is a rigid shell; there is no water and nothing drains.
Plastic Crate Stack, Blue (Allotments and Community Garden)
The same stack of three crates in pale blue, for mixing colours across a plot. The geometry is unchanged.
Upturned Pot Stack (Allotments and Community Garden)
Four terracotta pots stacked upside down to keep the rain out, 0.63 m high, with two more stood beside them in the grass. One static solid; the pots do not separate.
Plastic Crate Stack (Allotments and Community Garden)
Three stacked ventilated produce crates, just over a metre to the top of the pile and set down slightly out of square. The crates are one solid: they do not come apart or nest.
Bird Scarer on a Pole (Allotments and Community Garden)
A 1.9 m pole with four arms of old discs and cut plastic streamers on the head, turned by the wind over a sown bed. The head is one node on the pole, so the clip spins the whole spider; the streamers do not flutter on their own.
Honesty Box Stall (Allotments and Community Garden)
A 1.3 m trestle stall of surplus produce by the gate, with two crates of greens, a painted price card and a locked honesty box with a coin slot. The box is a solid model: it does not open and holds nothing.
National Beehive (Allotments and Community Garden)
A 1.4 m national beehive on a timber stand: a floor, three brood and super boxes with handholds, a crown board and a galvanised roof, with the entrance block at the front. The boxes are modelled as one static stack; nothing lifts off and there are no bees.
Picnic Table (Allotments and Community Garden)
A 1.8 m timber picnic table with benches on both sides, 0.74 m to the table top on crossed A-frame legs. One static solid; the benches are part of the frame.
Bonfire Ring (Allotments and Community Garden)
A 1.4 m ring of reclaimed bricks round a bed of ash, with half burnt prunings stacked in the middle and a pile of green waste beside it. Nothing burns: there is no fire, smoke or light in the model.
Pallet Bench (Allotments and Community Garden)
A bench knocked together from two pallets with a third stood up behind for a back, 1.2 m wide with a cushion on the seat. The pallets are one static solid.
Striped Deckchair (Allotments and Community Garden)
A folding timber deckchair set up on the plot, 0.86 m to the head of the frame with a striped canvas sling. It is modelled in the open position: the frame is one solid and does not fold.
Water Butt on a Stand (Allotments and Community Garden)
A 1.6 m green plastic water butt on a timber stand, tapped at the foot with the bucket height a can needs, and fed by a galvanised downpipe swanning over into the lid. The tap and the downpipe are fixed: there is no water volume and no flow.
Slatted Timber Compost Bin (Allotments and Community Garden)
A 1 m square timber compost bin 0.86 m high, four corner posts with slatted sides and a heap of half rotted material in it, closed by a hinged board lid. The lid is one node on the back edge; the slats are fixed.
Leaf Mould Cage (Allotments and Community Garden)
A 1.1 m square wire cage on four galvanised stakes, 1 m high, filled with autumn leaves left to rot down. The netting is modelled as rigid wire; it does not sag or move.
Plastic Dalek Compost Bin (Allotments and Community Garden)
The council issue plastic compost bin: a 0.94 m tapered black cone with moulded rings, a hatch at the foot for taking compost out and a lift off lid modelled as a hinged node. The hatch is fixed geometry.
Folding Table Stack (Community Sports Hall and Changing Rooms)
Four folding hall tables stood on edge in a steel storage rack with their legs folded flat against the tops. Static geometry: the tables do not unfold.
Spare Net Roll (Community Sports Hall and Changing Rooms)
A spare court net rolled on its steel bar in a low stand, with a blue tape band round the roll. Static geometry: the net is stored as it is modelled.
Stacking Chair Trolley (Community Sports Hall and Changing Rooms)
A stacking chair trolley with eight polypropylene hall chairs on it in alternating blue and red, a push handle and four swivel castors. The castors are named nodes and roll; the chairs are modelled as a stack and do not come off.
Pump and Whistle Tray (Community Sports Hall and Changing Rooms)
A coach kit tray: a shallow steel tray with a blue liner holding a ball pump and a spare needle, two whistles on lanyard rings and a roll of pitch tape. Static geometry.
Ball Cage on Castors (Community Sports Hall and Changing Rooms)
A 1 m ball cage on four swivel castors, meshed on all four sides with a red top rail and twelve match balls in it. All four castors are named nodes and roll; the balls are geometry and stay where they are modelled.
Cone and Training Bib Set (Community Sports Hall and Changing Rooms)
A coaching set laid out for a session: three marker cones set down, a nested stack of six more, and a folded pile of green and blue training bibs. Static geometry.
Equipment Store Cage (Community Sports Hall and Changing Rooms)
A 2 m by 1 m walk in equipment store cage: a welded steel frame meshed on the back, sides and roof, two shelves loaded with match balls, a fixed mesh bay at one end and a mesh door with a red handle hinged on its outer stile. The door is a named node; the mesh is geometry.
Foyer Waste Bin (Community Sports Hall and Changing Rooms)
A 0.9 m foyer waste bin: a dark steel drum with a blue band and a domed steel lid hinged along its back edge. The lid is a named node and lifts.
Fixture Notice Board (Community Sports Hall and Changing Rooms)
A 1.7 m by 1.15 m fixture notice board: a dark frame round a cork face with a blue header band and four pinned sheets in red, yellow, green and blue. The sheets carry no readable text. Modelled with the frame on y=0.