Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
11,347 free GLB models
AnimatedWorkshop trolley, 0.9 m (Woodworking Workshop and Joinery)
Three shelf steel trolley on four castors with a push handle, loaded with cut parts, a tin of finish and a clamp, for moving a job between the bench, the machines and the finishing corner.
Drying rack for finished parts, 1.4 m (Woodworking Workshop and Joinery)
Steel drying rack 1.4 m wide and 1.8 m tall: six levels of timber battens carrying finished ply and hardwood parts on edge, so a batch can air off without touching.
Finishing table, 1.2 m (Woodworking Workshop and Joinery)
Grey steel finishing table with a cream turntable top, a part in the middle being oiled, an open tin with its brush, a rag and a stack of finishing pads on the lower shelf, set in the corner a joiner keeps clean.
Offcut bin, 0.9 m (Woodworking Workshop and Joinery)
Timber sided offcut bin on skids, 0.9 m by 0.6 m, filled with short ends and ply strips standing at the angles they were thrown in at, with a stencil plate on the front.
Glue and finish shelving, 0.9 m (Woodworking Workshop and Joinery)
Steel shelving unit 0.9 m wide and 1.5 m tall with three shelves of workshop stock: tins of finish and stain, glue bottles, a jar of brushes, rag rolls and a measuring jug, all with blank labels.
Panelled door on a stand, 2 m (Woodworking Workshop and Joinery)
Finished four panel door 2 m tall in hardwood with raised ply panels, a steel lever handle and two hinges, standing upright in a timber stand with a back brace, the way a finished job waits for collection.
Timber rack with boards, 2.3 m (Woodworking Workshop and Joinery)
Blue cantilever timber rack 2.3 m wide and 2.25 m tall on bolted foot plates, with four pairs of raked arms carrying a full load of sawn hardwood and softwood boards in mixed widths and thicknesses.
Sheet material rack with ply, 2.5 m (Woodworking Workshop and Joinery)
Upright sheet rack 2.5 m wide: a steel base frame with charcoal dividers and a back leaning post, holding five birch ply and MDF sheets on edge with their faces clear of the floor.
Timber rack, part loaded, 2.3 m (Woodworking Workshop and Joinery)
The same cantilever rack after a run of work: the lower arms still carrying boards and the upper arms nearly clear, for a shop that has been using its stock.
Sharpening station, 0.7 m (Woodworking Workshop and Joinery)
Sharpening bench in pine: a charcoal stone pond holding a coarse and a fine waterstone, a leather strop on its block, a honing guide, a water jug and a lower shelf of stone boxes, set at the height a joiner touches up an iron.
Clamp rack with sash clamps, 1.8 m (Woodworking Workshop and Joinery)
Steel A frame clamp rack on castors holding six 1.5 m sash clamps: each clamp is a steel bar with a red head casting, a sliding tail on its pin and a screw with a timber T handle, racked the way a shop keeps them beside the assembly table.
AnimatedRolling tool chest, 1 m (Woodworking Workshop and Joinery)
Red seven drawer tool chest on four castors: a timber worktop, steel drawer pulls on every front, a side handle and a lower cupboard, with every drawer opening on its runners.
Sawhorse pair, 1 m (Woodworking Workshop and Joinery)
Two site built timber sawhorses with 1 m top beams, splayed legs, gussets and a lower tie, set out as a pair at working distance so a board or a door can be laid across them.
AnimatedJoiner's workbench with vice, 2 m (Woodworking Workshop and Joinery)
Laminated hardwood bench 2 m long on square legs and stretchers: eight glued top boards with a row of round dog holes, a front apron, a lower pine shelf and a cast front vice whose timber faced jaw slides out on its screw.
Assembly table, 1.8 m (Woodworking Workshop and Joinery)
Low assembly table 1.8 m by 1.1 m on a blue welded frame: a birch ply top on a torsion box grid with a field of dog holes, a lower shelf carrying two clamps and adjustable feet, built at 800 mm so a carcass can be squared up on it.
AnimatedMobile machine base, 0.8 m (Woodworking Workshop and Joinery)
Adjustable steel machine base: a welded rectangular frame with four corner brackets, a yellow foot lever and four castor wheels, so a planer or a band saw can be rolled out of the way and set down again.
AnimatedTwin bag dust extractor, 2.05 m (Woodworking Workshop and Joinery)
Blue twin bag extractor on a charcoal base with four castors: a fan housing over the motor, a 200 mm inlet with its flexible cuff, a steel hoop frame carrying the cream filter bag above and the collection bag below, and the motor fan turning on top.
Dust extraction duct run, 2 m (Woodworking Workshop and Joinery)
Two metre galvanised extraction duct 220 mm across with flanged joints, a bolted hanger strap and a blanked branch takeoff, ported at both ends so a run repeats across the shop to the extractor.
Workshop ceiling light bar, 2.4 m (Woodworking Workshop and Joinery)
Suspended twin tube light 2.4 m long: a grey steel channel on two drop rods with a charcoal reflector and two cream diffuser tubes, for lighting a bench run or a machine bay.
Cycle Rack (Bus Station and City Transit)
Three steel hoop stands 800 mm apart on a 2.4 m run, each with a blue collar at leaning height. The stands are modelled as solid hoops with no ground sockets.
AnimatedStreet Litter Bin (Bus Station and City Transit)
A ribbed steel street bin with a blue domed lid hinged along its back edge and a moulded handle. The liner is not modelled.
Street Bench (Bus Station and City Transit)
A 1.8 m public bench: three yellow seat slats and three back slats on cast charcoal ends. Static.
Timetable Case (Bus Station and City Transit)
A 2.05 m timetable case on two steel legs: a charcoal frame around a yellow sheet with a blue header. The printed timetable is a painted panel, not readable text. Static.
AnimatedDeparture Board on a Stand (Bus Station and City Transit)
A 2.9 m wide departure board on two steel legs: a charcoal case with four yellow departure rows, a blue header and a top row built as its own node so it can tilt like a split flap turning. The characters are painted blocks, not readable text.