Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
AnimatedCaramel Kettle (Chocolate and Confectionery Factory)
An open cooking kettle of caramel on three legs with a bridge mounted stirrer, a heavy rim and a small abstract dial plate on the frame.
AnimatedFilling Piping Head (Chocolate and Confectionery Factory)
A bench top piping head on a teal post: a small filling reservoir feeding three nozzles that drop onto a tray of open shells below.
AnimatedVibrating Table (Chocolate and Confectionery Factory)
A spring mounted vibrating table that settles a filled mould: a dark base on four coil pads, a steel deck with tray rails and a side drive box.
AnimatedDemoulding Station (Chocolate and Confectionery Factory)
A demoulding station: a twin roller knock out head on a teal gantry over a dark deck, an emptied mould tray to one side and a kraft tote of turned out bars.
AnimatedDepositor Head (Chocolate and Confectionery Factory)
A gantry depositor: two teal columns carrying a hopper and a five nozzle head that travels down onto the mould below, with a small abstract dial plate.
Shell Mould Tray (Chocolate and Confectionery Factory)
A teal mould tray of twelve domed praline shells, the round counterpart to the bar tray and the same 0.62 by 0.42 m footprint.
Bar Mould Tray (Chocolate and Confectionery Factory)
A teal polycarbonate mould tray of six segmented chocolate bars, each an invented plain rectangle divided into three fingers.
Moulding Table (Chocolate and Confectionery Factory)
A stainless moulding bench 2.0 m long with an undershelf, three teal trays of cast bars on top and two empty trays stored below.
AnimatedEnrobing Line Section (Chocolate and Confectionery Factory)
A 2.4 m enrobing section: a wire belt on a teal frame under a curtain head, with coated centres running through and an abstract control plate on the leg.
Cooling Tunnel Section (Chocolate and Confectionery Factory)
A 3.0 m enclosed cooling tunnel: a teal hood over a dark belt with an open mouth at each end, three chiller units on the roof and an abstract dial plate.
AnimatedTempering Machine (Chocolate and Confectionery Factory)
A continuous tempering unit: a steel cabinet with a heated bowl and stirrer under a hinged teal lid, an abstract touch panel and a tempered chocolate outlet over a catch pan.
AnimatedConche Vat (Chocolate and Confectionery Factory)
A round conche: a teal jacketed vat of chocolate on three legs with a top drive, two shear arms sweeping the base and an abstract dial plate on the side.
AnimatedNut Roaster (Chocolate and Confectionery Factory)
A small nut roasting drum on an amber frame with internal vanes, a feed hood, an exhaust pipe and a discharge tray of roasted kernels.
AnimatedChocolate Tank With Tap (Chocolate and Confectionery Factory)
A jacketed holding tank of liquid chocolate on three legs, with a hinged teal lid, a level band and a front tap drawing into a small steel pan.
AnimatedCocoa Winnower (Chocolate and Confectionery Factory)
A winnowing tower: a cracking head on top, three stacked sorting decks behind a teal casing, a side aspiration fan and a kraft bin catching the nib fraction.
AnimatedCocoa Bean Roaster Drum (Chocolate and Confectionery Factory)
A stylised batch roaster: a perforated steel drum on a teal frame with internal lifter vanes, a drive motor, a hot air stack and a small abstract dial panel.
Cocoa Bean Sack Stack (Chocolate and Confectionery Factory)
A stack of six filled hessian cocoa bean sacks on a timber pallet, tied at the neck, with a few spilled beans on the floor beside it.
AnimatedCocoa Grinder Mill (Chocolate and Confectionery Factory)
A pin mill that grinds nibs to liquor: a steel grinding chamber on four legs with a teal feed hopper, a three arm rotor inside and a liquor outlet pipe.
Awning Run on Poles Crimson (Indian Bazaar Street and Temple)
The same 6 m awning span in crimson with a saffron valance, so a chained run of awnings alternates colour down a pavement. Geometry, pole position and end ports are identical to the saffron span.
Plastic Stool Blue (Indian Bazaar Street and Temple)
The same moulded plastic stool in blue: a 340 mm round seat with a rolled rim on four splayed legs with a tie ring, 430 mm tall. Geometry is identical to the red stool; only the material differs.
Speaker Horn on a Pole (Indian Bazaar Street and Temple)
A pair of horn loudspeakers on a 3.6 m steel pole, facing opposite ways off a yoke, with drivers behind them and the feed cable taped up the pole in three straps. 1.16 m across the horns. Static and silent; there is no audio in a GLB.
Bunting Line (Indian Bazaar Street and Temple)
A 5 m line of bunting on two steel poles: a sagging wire with twelve triangular flags in five colours hanging from it at 2.6 m. The flags are flat solids and the whole line is static, because cloth needs a joint per flag that a rigid node cannot give.
Satellite Dish (Indian Bazaar Street and Temple)
A 660 mm offset dish on a wall bracket: a backing plate, a tilted dish on a short mast, a feed arm and head, and a cable running down off the bracket. 0.66 x 0.62 x 0.86 m, origin at the wall plate so it mounts at any height. Static.
Wall Cable Bundle and Meter Boxes (Indian Bazaar Street and Temple)
The servicing on a shop wall: a steel meter cabinet and a teal junction box, nine cables running up the plaster in three straps, and a coil of slack hung on a hook beside them. 1.4 x 1.8 m of wall, 210 mm proud. Hangs on any flat frontage. Static.