Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
Solar Panel Array (Radio Telescope Array and Field Station)
A four module ground mounted solar array on a fixed tilted frame, with the string box at one end, sized to top up the station batteries between generator runs.
Cryogenic Receiver Dewar (Radio Telescope Array and Field Station)
The vacuum dewar a cooled receiver lives in: an insulated vessel on four legs with a clamped flange, the cold head on top and two transfer lines rising from it.
AnimatedSignal Equipment Rack (Radio Telescope Array and Field Station)
A floor standing signal rack: seven blank equipment faces with indicator blocks, a fan tray on the roof and two mesh doors that swing open from the middle.
AnimatedSignal Junction Pit (Radio Telescope Array and Field Station)
A cast junction pit where trench runs meet: a chamber with three cable ways across it, a red marker plate on the front and a steel lid hinged on its back edge that lifts open.
Guyed Mast with Anchors (Radio Telescope Array and Field Station)
A nine metre triangular lattice mast with a climbing ladder, a whip on the headframe and three guys running down to their own cast anchor blocks with lifting eyes.
Cable Trench Cover Run (Radio Telescope Array and Field Station)
The precast cover that closes a cable trench: four slabs laid end to end with lifting eyes and the edge strips that seat them, ported to the same four metre module as the trench.
Open Cable Trench Section (Radio Telescope Array and Field Station)
A four metre run of open cable trench: concrete kerbs either side, a sand bed between them, three bundled cables on it and the steel straps that hold them down.
Dipole Array Panel (Radio Telescope Array and Field Station)
A flat eight element dipole array on a reflecting screen: two rows of crossed dipoles on stand-offs, a braced frame behind them and the combiner box at the foot.
Log Periodic Antenna (Radio Telescope Array and Field Station)
A log periodic boom antenna on a short mast: nine elements shortening towards the feed end, staggered either side of the boom, with the balun box at the back.
Dish Feed Horn and Quadripod (Radio Telescope Array and Field Station)
A spare dish feed assembly on its transport frame: the flared horn, the receiver box behind it and the four legs that carry it at the focus, stood on a concrete pad.
Small Horn Antenna (Radio Telescope Array and Field Station)
A pyramidal horn antenna on a three leg stand: four flared panels opening forward from a waveguide throat, with the receiver box behind it, standing on its own pad.
Dish Rail Track Section (Radio Telescope Array and Field Station)
A six metre section of the rail a movable dish traverses: a ballast bed, sleepers across it and two rails on chairs, ported end to end so a run is as long as the site needs.
AnimatedRail Bogie for a Movable Dish (Radio Telescope Array and Field Station)
The powered carriage a movable dish rides on: a welded deck with the turret bearing on top, drive boxes on both ends and four flanged wheels, traversing along its rails as one node.
Dish Pedestal Base (Radio Telescope Array and Field Station)
The pedestal a dish stands on, on its own: a stepped concrete foundation, a tapered column with a service door, a climbing ladder and the bolted bearing ring that takes the turret.
Dish Counterweight Block (Radio Telescope Array and Field Station)
A ballast block for the back of a dish yoke: a cast mass in a steel frame with a lifting eye on top, banded red, resting on its own pad.
AnimatedSmall Parabolic Dish Antenna (Radio Telescope Array and Field Station)
A three metre parabolic dish on a short pedestal, the outrigger of a field array or a monitoring antenna beside the cabins, slewing and tilting on its own nodes.
AnimatedMedium Parabolic Dish Antenna (Radio Telescope Array and Field Station)
A six metre parabolic dish on the same altazimuth pedestal as the large machine, sized for the middle of a field array, with a slewing turret and a tilting reflector.
AnimatedLarge Parabolic Dish Antenna (Radio Telescope Array and Field Station)
A nine metre parabolic dish on an altazimuth pedestal: the turret slews about the vertical, the reflector tilts about the yoke axle, and the quadripod feed and counterweight travel with it.
Forge lantern, 0.42 m (Blacksmith Forge and Armoury)
Iron framed lantern with horn panes, a pierced smoke cap and a candle inside, standing on its base with the carrying ring folded over, for the dark end of a workshop.
AnimatedSand and flux bin, 0.8 m (Blacksmith Forge and Armoury)
Boarded oak bin with a lifting lid, divided inside for silver sand, borax flux and charcoal dust, with a scoop hanging on the end of it.
Wall candle sconce, 0.3 m (Blacksmith Forge and Armoury)
Forged wall sconce with a scrolled arm, a drip pan and a tallow candle burning in it, fixed to a boarded plate so it mounts flat on a wall or a post.
AnimatedHanging balance scale, 1.0 m (Blacksmith Forge and Armoury)
Iron beam balance hung from a hook with two brass pans on chains and a set of weights on the near pan, for selling ironwork by weight at the counter. The origin is the hanging hook at the top.
AnimatedLedger desk, 1.16 m (Blacksmith Forge and Armoury)
Sloped oak clerk's desk with a lifting lid over the ledger, an ink horn and a tally stick in the pen groove, its book ruled with abstract marks rather than readable writing.
Shop counter with stock, 1.8 m (Blacksmith Forge and Armoury)
Oak selling counter 1.8 m long on a boarded front with a worn top, a shelf of finished ironwork under it and a tray of small goods, hooks and nails set out on top for a customer to pick over.