Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
Flood Light Truss (Velodrome and Track Cycling)
A free standing lighting mast: two ballasted A frames carrying a 5.2 m lattice truss at 6 m with four flood heads on it, faces down. The lamp faces are plain white panels and no light is emitted.
Cone Set (Velodrome and Track Cycling)
Five 0.47 m marker cones on square bases, in yellow with a white reflective band, scattered as a set for closing a lane of the apron or marking a warm up area.
Crowd Barrier Set (Velodrome and Track Cycling)
A 2.4 m linked crowd barrier with splayed feet, a top rail at 1.05 m and six uprights, in bare steel. Ports at both ends so a run of them closes off an entrance or a working area.
Banner Rail Run (Velodrome and Track Cycling)
A 4 m bay of the trackside banner rail: two posts, a top rail and a blank white panel with a yellow edge band. The panel carries no wording or logo of any kind. Ports at both ends so the rail runs the length of a straight.
Scoreboard Frame (Velodrome and Track Cycling)
A trackside scoreboard: a 4.2 by 1.7 m frame on two posts with a blank white face and a red header band. Nothing is written on it, so a project can letter or texture the face as it likes.
Big Screen Frame (Velodrome and Track Cycling)
The arena big screen: a 6.4 by 3.6 m charcoal frame on two steel legs, 8 m to the top. The face is deliberately blank, a plain dark panel for a project to map its own video or texture onto.
AnimatedLap Board and Stand (Velodrome and Track Cycling)
The laps to go board on its stand: a two post frame with a blank white card and a hinged charcoal leaf over it that flips on the head rail. The number face is a plain white block, so a project can letter it however it likes.
Photo Finish Rig (Velodrome and Track Cycling)
The photo finish camera on its tripod: three splayed steel legs, a pan head and a charcoal body with a lens barrel and a yellow control box, 1.8 m to the lens. Static, because the head is a linkage rather than a single rigid joint.
AnimatedBell on a Stand (Velodrome and Track Cycling)
The bell rung for the last lap, hung from a two post stand 1.6 m up: a brass coloured bell with a clapper ball, on a named node at the head rail so the whole bell rocks. The stand is ballasted and the bell is struck by hand, so nothing else moves.
Start Light Tree (Velodrome and Track Cycling)
The three lamp start light tree used for timed starts: a ballasted mast 2.6 m tall with a charcoal head carrying red, amber and green lenses facing the track. The lenses are plain coloured discs and emit no light.
AnimatedStarting Gate with Holder Frame (Velodrome and Track Cycling)
The wheeled frame that holds a bicycle upright for a standing start: a ballasted base on castors, two uprights and a head rail, with a hinged holder arm that lifts clear to release. The arm is a named node on the head rail pivot.
Track Side Fence Run (Velodrome and Track Cycling)
A 4 m bay of the 2.2 m fence that closes the back of the track apron: two footed posts, three steel rails and eleven charcoal uprights. Ports at both ends so it runs round the inside of the arena.
Infield Safety Rail Run (Velodrome and Track Cycling)
A 4 m bay of the tubular rail that separates the track centre from the apron: three footed posts with a top rail at 1 m and a mid rail, in steel. Ports at both ends, so bays run round the whole infield.
Track Surface Board Panel (Velodrome and Track Cycling)
A spare panel of track decking, 2.4 by 1.2 m of pale pine boards on two steel bearers, for laying flat in the track centre as a repair stack or a working platform. Six raised boards read as the plank courses of the running surface.
Muster point board, blank (Shipyard and Dry Dock)
A free standing yard notice board on two posts with a blank white face and a blank header panel above it, for a project to letter its own muster instructions and permit notices onto.
Yard fire point (Shipyard and Dry Dock)
A red fire point stand with two extinguishers on a shaped rack, a call point, a blank instruction board above them and a sand bucket on a hook, for the dock side of a working shipyard.
Emergency eyewash and shower (Shipyard and Dry Dock)
A plumbed emergency shower and eyewash station on a green backed stand: an overhead rose on a pull rod, a bowl with two spray heads, a foot treadle, a blank instruction sign and a floor drain grating.
Quay mooring bollard with rope (Shipyard and Dry Dock)
A cast steel kidney bollard 0.9 m tall on a bolted base plate, with a cream mooring rope dressed over it in a loose eye and run off toward the water, for the quay edge outside a dock gate.
Fitters workbench with vice (Shipyard and Dry Dock)
A steel workbench 2.4 m long with a scarred hardwood top, a bench vice bolted at one end, a tool panel behind it hung with spanners and files, a drawer unit under and an open shelf of stock below.
AnimatedSite tool store cabinet (Shipyard and Dry Dock)
A heavy steel tool store 1.6 m wide on a forkable plinth, with two locking doors, a shelf of power tools and hand tools inside, a hasp and a blank asset plate. Both doors swing open.
Pipe spool rack (Shipyard and Dry Dock)
A tiered rack of prefabricated pipe spools in shop primer: flanged straights, bends and a tee on three shelves of a bolted frame, with end stops, timber battens and a blank tag board.
Vertical plate rack (Shipyard and Dry Dock)
A fabricated A frame plate rack 4 m long holding cut shell plates on edge in shop primer, with timber packers between them, chocks at the foot and a blank stock board at one end.
Containerised generator set (Shipyard and Dry Dock)
A site generator in an acoustic container: hinged access doors along one side, a roof exhaust with a rain cap, an output panel with a blank rating plate, a bunded fuel base and forklift pockets.
Skid mounted air compressor (Shipyard and Dry Dock)
A canopied screw compressor on a skid: an acoustic housing with louvred panels, a receiver tank alongside, an outlet manifold with four valves, a control panel and lifting eyes at the corners.