Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,316 free GLB models
Lane Number Sign (Bowling Alley and Pool Hall)
The lit lane number panel that hangs over a pin deck: a double sided glowing face in a dark case on two drop rods, with an accent rail under it. The face carries no digits, so a consumer numbers their own lanes.
Bowling Shoes, Pair (Bowling Alley and Pool Hall)
A pair of house hire shoes set down side by side: navy uppers with a cream toe cap and a magenta heel counter, on a flat sliding sole, with laces and the size patch on the heel. 290 mm long.
Ball Rack, Empty (Bowling Alley and Pool Hall)
The same rack with every ball taken off it, for a lane that is closed or a rack a consumer loads themselves.
AnimatedBowling Ball, Marbled (Bowling Alley and Pool Hall)
The same house ball in black resin with cream marbling swirled round it, for a rack that is not all one colour.
AnimatedBowling Ball (Bowling Alley and Pool Hall)
A 218 mm house ball in magenta resin with the three drilled finger holes sunk into its top face. The whole ball is one named node on its own centre, so it rolls.
Ball Rack with Balls, Cool Set (Bowling Alley and Pool Hall)
The same house rack loaded with the cool half of the ball colours: glowing cyan, black and green.
Ball Rack with Balls, Warm Set (Bowling Alley and Pool Hall)
The same house rack loaded with the warm half of the ball colours: magenta, timber marble and cream.
Ball Rack with Balls (Bowling Alley and Pool Hall)
A six ball house rack on two curved chrome rails and a welded frame, loaded with balls in the house colours. The rails hold every ball clear of its finger holes, the way a real rack does.
AnimatedBall Return Unit (Bowling Alley and Pool Hall)
The ball return console that stands between two lanes: a tapered frame body with glowing side bands, the chrome return rails and two balls waiting on the ramp, and a hood over the ball lift that opens on its back edge for a jam.
AnimatedPinsetter Machine Housing (Bowling Alley and Pool Hall)
The pinsetter that stands behind a pin deck on the lane pitch: a welded frame with side sheets, the accent masking panel a bowler sees above the pins, the distributor drum and chutes inside, and a control box. The cowl over the machine deck lifts on its back edge.
Bowling Pin (Bowling Alley and Pool Hall)
A single ten pin on the real profile: 381 mm tall, 121 mm across the belly, in coated white with the two red neck stripes and the dark base ring that keep it readable against a pale floor.
Guitar Wall Hanger (Music Recording Studio and Instruments)
A timber backed guitar wall hanger: a screwed plate with a steel stem and two sleeved yoke arms 140 mm apart, which is the cradle a guitar neck hangs in. The plate sits flat against the wall.
Studio Wall Clock (Music Recording Studio and Instruments)
A 260 mm studio wall clock: a matt black case with a cream dial, twelve markers, hour and minute hands and a red sweep hand. The back of the case sits at z=0 so it hangs flat on a wall.
Coffee Mug (Music Recording Studio and Instruments)
A 350 ml stoneware mug 100 mm tall with a banded glaze, a loop handle and coffee in it, for the console armrest.
Water Bottle (Music Recording Studio and Instruments)
A 750 ml water bottle 280 mm tall with a moulded waist, a printed band and a screw cap, for the corner of a desk or the top of an amp.
Studio Rug (Music Recording Studio and Instruments)
A 2.6 by 1.9 m patterned rug in teal, red and amber with a fringed edge, 10 mm thick. A kit is set up on one because it stops the drums walking and takes the ring off the floor.
Drum Throne (Music Recording Studio and Instruments)
The same stool built as a drum throne: a wider, deeper padded seat at 550 mm on a three leg frame, which is the height and the spread a kit is played from.
Studio Stool (Music Recording Studio and Instruments)
A 660 mm padded studio stool: a round upholstered seat on a four leg steel frame with a foot ring and rubber tips, for a guitarist, an engineer or a spare seat at the desk.
Music Stand (Music Recording Studio and Instruments)
A folding music stand at 1.06 m with a sheet on its desk: a perforated steel desk on a raked hinge, a telescopic column and a rubber footed tripod.
AnimatedFlight Case, Small (Music Recording Studio and Instruments)
The same ply flight case in a 560 by 400 by 400 mm size without castors, for microphones, leads and small outboard.
AnimatedFlight Case, Large (Music Recording Studio and Instruments)
A 920 by 560 by 580 mm ply flight case on castors: a riveted shell with aluminium extrusion edging, eight corner caps, two butterfly latches, spring handles, an amber lid label and a lid hinged along its back edge.
AnimatedCable Drum (Music Recording Studio and Instruments)
A 540 mm timber cable drum wound with black multicore, resting on its flanges with the tail led off and coiled on the floor beside it.
Isolation Screen (Music Recording Studio and Instruments)
A free-standing 900 by 1800 mm isolation screen: a framed 70 mm absorber in grey fabric on a steel post frame with weighted feet. Its screen-left and screen-right ports meet the next screen square or at a right angle, so three of them fold into a vocal booth.
AnimatedTwo Inch Tape Machine (Music Recording Studio and Instruments)
A two inch multitrack tape machine, the hero piece of a control room: a pedestal cabinet with a timber front under an upright transport deck carrying two 10 inch reels with spoked flanges and brass hubs, a head block, five transport buttons and two meters. 1.3 m tall.