Free models · Game-ready GLB
Buildings
Every modern building below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole buildings set from the packs.
1,471 free GLB models
Protective Glass Panel, 2 m (Ice Hockey Arena and Locker Room)
A 2 m protective glass module 1.6 m tall in slim dark stanchions on a steel shoe. It is modelled to stand on top of a dasher board module, so place it at 1.07 m over the boards; glass-left and glass-right butt panel to panel along a run. The glass is a solid sheet with no flex.
AnimatedPlayers Bench with Gate (Ice Hockey Arena and Locker Room)
A 3.6 m players bench: dasher board on the ice side with a 900 mm hinged gate, a 1.9 m white back wall with a blue cap, side walls, a rubber floor and a three slat timber bench on steel legs, with a stick rail behind it.
Dasher Board Corner, 2 m Radius (Ice Hockey Arena and Locker Room)
A rink corner struck on a 2 m radius from eight short dasher segments, filling one 2 m module square, so a run turns through 90 degrees with no gap. The ice side is the concave face.
Dasher Board Panel, 2 m (Ice Hockey Arena and Locker Room)
A 2 m dasher board module 1.07 m tall: a white kicked panel with a yellow kick plate on the ice face, a blue cap rail and two steel back posts. Panels butt on the 2 m module through board-left and board-right, so a run closes a rink and the glass module drops on top.
Goal Crease Ice Pan (Ice Hockey Arena and Locker Room)
A 2 m ice pan painted with the goal line along its back edge and the goalkeeper crease drawn off it: a light blue fill inside a red outline. The crease is drawn at 950 mm radius so it sits inside the 2 m module rather than at the 1.83 m of a regulation rink.
Ice Surface Pan, 2 m (Ice Hockey Arena and Locker Room)
A 2 m square ice pan, 60 mm deep: a dark service frame carrying a pale blue ice slab proud of it. Pans tile on a 2 m grid through ice-left, ice-right, ice-front and ice-back, so a rink is laid out module by module and the marked pans drop into the run.
AnimatedPark Gate with Brick Piers (City Park and Playground)
A 3.1 m park entrance: two banded piers with capped pyramid tops and a pair of spear top iron leaves hung on their inner faces. Each leaf is its own node on its own pier, so the pair opens outward together.
Timber Pergola (City Park and Playground)
A 3.6 x 2.4 m pergola: four posts, two head beams, eight rafters and a bench board on each side, with a climbing plant over both ends. Static.
Hexagonal Park Bandstand (City Park and Playground)
A 5.8 m hexagonal bandstand: a raised paved plinth with a timber deck, six posts with blue balustrades between five of them, three steps up to the open bay and a red conical roof with a finial. Static.
AnimatedPark Refreshment Kiosk (City Park and Playground)
A 3 x 2.2 m park kiosk: a blue block with a red stall riser, a timber serving counter, a menu board and a red parapet roof. The steel shutter over the hatch is one node on its head, so the clip lifts it out as an awning.
Play Tower with Roof and Ladder (City Park and Playground)
A 2.5 m timber play tower: a 1.9 m square deck at 1.3 m inside blue guard panels, a five rung ladder up the open side and a red gabled roof on the four posts. Static.
Clubhouse Roof Slope (Tennis Club and Courts)
One 4 m bay of clubhouse roof: a charcoal slab that seats on the wall head at its eave edge and climbs 1.8 m over a 3 m run to the ridge, with standing seams picked out along it.
Clubhouse Ridge Cap (Tennis Club and Courts)
A 4 m ridge cap in clay red, 0.6 m across and cut to the roof pitch, so it closes the joint where two slopes meet without reading as a slope of its own.
Clubhouse Gable End (Tennis Club and Courts)
The 6 m gable end that closes a clubhouse run: a rendered wall to the head, the gable above it cut to the roof pitch and a square window under the apex.
AnimatedClubhouse Door Bay (Tennis Club and Courts)
A 4 m clubhouse entrance bay on the same module as the wall bay: piers and a lintel round a 1.8 m opening, a timber threshold and a glazed door that swings open.
Spectator Bleacher (Tennis Club and Courts)
A 4.2 m three row spectator bleacher: timber benches and backs on a raked steel frame with side rails, for the surround beside a show court.
Clubhouse Window Bay (Tennis Club and Courts)
The 4 m clubhouse bay with a wide glazed window in a timber frame, for the lounge side that looks out over the courts.
Clubhouse Wall Bay (Tennis Club and Courts)
A 4 m clubhouse facade bay: a rendered wall 3 m to the head, a timber plinth and head band and a green sign panel, ported on both ends.
Practice Wall (Tennis Club and Courts)
A 6.4 m practice wall 3.16 m high: a blue hitting face on a charcoal plinth, a painted net line, a height line and three yellow target squares, buttressed at both ends.
AnimatedCourt Fence Gate (Tennis Club and Courts)
A 3 m fence bay with a 2.1 m mesh gate in it: the same posts and rails as the plain panel, a mesh light over the head and a single leaf that swings out of the court.
Court Windbreak Panel (Tennis Club and Courts)
The same 3 m fence bay with a blue windbreak screen tied over its lower 1.85 m, the band of club colour that backs a court and keeps the wind off it.
Court Fence Panel (Tennis Club and Courts)
A 3 m bay of 3 m high court fencing: charcoal end posts, three rails and a steel wire mesh, ported on both ends so bays run into a full enclosure.
Mirrored Wall Panel Module (Gym and Fitness Studio)
A 1.2 m by 2.4 m mirrored wall panel on a backing board, with slim alloy stiles, a kick rail along the floor and a head rail. Panels butt on the 1.2 m module through run-left and run-right, so a run tiles along X with a 4 mm shadow gap at each joint.
Graffiti Wall Panel (Skate Park and Street Sports)
A 3 x 2.6 m precast boundary panel on a wide foot, sprayed with five blocks of colour and their outlines. Panels butt edge to edge into a painted wall of any length.