About
A quarter turn of 1.1 m ventilation ducting on the 2 m radius grid, with flanges at both ends and two hanger brackets. Dimensions 2.67 by 1.52 by 2.67 m (X by Y by Z), metre units, +Y up, +Z forward, resting on y=0. Modular piece on the 4 m mine grid; ports duct-a, duct-b. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Ventilation duct bend (Underground Mine and Shaft Works)” asset in my project. Model: https://cdn.3dassets.dev/assets/16378/v1/model.glb Asset page: https://3dassets.dev/assets/underground-mine-and-shaft-works-vent-duct-bend-bd1d3f2c Description: A quarter turn of 1.1 m ventilation ducting on the 2 m radius grid, with flanges at both ends and two hanger brackets. - Dimensions (X × Y × Z): 2.666 × 1.52 × 2.666 metres - Triangles: 672 - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/16378/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Ventilation duct bend (Underground Mine and Shaft Works)
A quarter turn of 1.1 m ventilation ducting on the 2 m radius grid, with flanges at both ends and two hanger brackets.
More in Roads & Infrastructure
Dock Platform (Quiet Lake Fishing)
2.4 m square timber module; four compatible edge ports at deck height 0.7 m.
Aisle keep clear chevron tile (Hardware Store and DIY Warehouse)
A 2.0 m square keep clear tile: a painted chevron arrow inside a bordered box, marking the clear zone in front of a loading door or a fire point.
Aisle floor marking corner tile (Hardware Store and DIY Warehouse)
A 2.0 m square floor marking corner: the aisle edge line turns through 90 degrees with a radiused corner, plus a bay corner square and a stop bar.
Aisle floor marking tile (Hardware Store and DIY Warehouse)
A 2.0 m square painted floor marking tile: a sealed concrete slab with two 100 mm aisle edge lines and a hatched pedestrian margin, 6 mm proud of the slab face.
Corner Docking Buffer (Flooded and Coastal Survival)
Right-angle docking buffer with timber backing and thick replaceable rubber faces.
Debris Boom (Flooded and Coastal Survival)
Linked buoyant floats and hanging mesh skirt for dressing a debris-catching barrier.
Portable Flood Barrier (Flooded and Coastal Survival)
Braced portable flood panel with broad sealing foot and visible upper safety strip.
Barrel Float Raft (Flooded and Coastal Survival)
Four recovered sealed drums strapped beneath a slatted work raft; static buoyancy representation.
Catamaran Work Platform (Flooded and Coastal Survival)
Twin prismatic floats supporting a broad salvage work deck and rear lifting crossbar.
Pontoon Dock (Flooded and Coastal Survival)
Twin sealed cylindrical pontoons carrying a timber deck with crossmembers.
Boardwalk Elbow (Flooded and Coastal Survival)
Right-angle boardwalk landing with two open approaches and continuous outside rail.
Inclined Gangway (Flooded and Coastal Survival)
Inclined slatted gangway with sloping stringers and handrails; one metre rise over three metres.
Similar assets
Ventilation duct run 4 m (Underground Mine and Shaft Works)
A 4 m run of 1.1 m rigid ventilation ducting with bolted flanges, roof hanger brackets and reflective marker plates.
Cabin ventilation duct run (Orbital Station and Docking Bays)
A 2 m cabin ventilation run on a module wall segment: a rectangular duct with flanged joints and a louvred diffuser, a fan box with a bladed inlet grille, a ribbed flexible hose loop and a service label.
Ventilation Duct Straight (Modular Survival Base Builder)
Ventilation Duct Straight: 2 × 0.3 × 0.3 m nominal survival duct assembly.
Quarter-turn conveyor (Factory Conveyor Network)
Quarter-turn conveyor for modular factory and automation scenes.
Stairs Quarter Turn (Medieval Castle Construction)
Two 2 m-rise flights with a square quarter-turn landing.
Quarter Turn Stair (Modular Survival Base Builder)
Quarter Turn Stair: 2 × 1.2 × 2 m nominal survival stairs assembly.
Greybox quarter-turn stair (Modular Greybox Architecture Kit)
An L-shaped stair: a 1.5 m flight climbing toward +Z, a 1.5 m square quarter landing on legs, then a second flight turning out along +X to finish one storey up.
Repulsor road plate, quarter turn (Hover Transit and Antigrav Fleet)
The repulsor road plate with its induction arcs swept through a quarter turn, joining a south lane port to an east one.
Pressurised connecting tunnel, quarter turn (Lunar Surface Colony and Rovers)
A quarter-turn tunnel bay that swings the run through ninety degrees between two hab-ports 3 m from the corner, carried on two ground trestles.
Maglev Guideway Quarter Curve (Arcology Towers and Skyways)
A 16 m radius quarter-turn maglev guideway: the standard box girder swept through 90 degrees with a continuous running surface, teal reaction beams and bearing saddles, turning a line from north-south to east-west.
Kitchen curved end shelf (Fitted Kitchen and Bathroom Builder)
Three tier quarter round open end shelf, 300 mm radius, that softens the end of a base or wall run.
Air Duct Straight (Bank Vault Heist Kit)
Two-metre rectangular ventilation duct with open ends and reinforcing flange rings.