Loading model
About
Worktop section on the stream grid: 1200 by 615 by 30 mm with a 460 by 400 mm bowl aperture set 10 mm behind centre. The aperture is formed from four chamfered rails, so the cut edge reads correctly from above and below. Measured extent 1.200 x 0.030 x 0.615 m (X x Y x Z), metre units, +Y up, user side toward +Z, resting on y=0. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Kitchen worktop with sink cut out (Fitted Kitchen and Bathroom Builder)” asset in my project. Model: https://cdn.3dassets.dev/assets/17842/v1/model.glb Asset page: https://3dassets.dev/assets/fitted-kitchen-and-bathroom-builder-worktop-sink-cutou-4af19352 Description: 1.2 m worktop section with a 460 by 400 mm sink aperture, built as four rails so the cut edges are visible and chamfered. - Dimensions (X × Y × Z): 1.2 × 0.03 × 0.615 metres - Triangles: 256 - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/17842/v1/model.glb', (gltf) => {
scene.add(gltf.scene)
})Common questions
How do I use this model with my AI development tools?
How do I get started?
Which game engines and tools can I use this model with?
How do I import this model into Unity, Godot, Unreal or Blender?
Can I use this model in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I need Draco, Meshopt or KTX2 to load it?
Kitchen worktop with sink cut out (Fitted Kitchen and Bathroom Builder)
1.2 m worktop section with a 460 by 400 mm sink aperture, built as four rails so the cut edges are visible and chamfered.
More in Props & Furniture
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)
Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)
Sun yellow variant of the swim zone marker buoy with a coral cross topmark.
Dune Grass Tuft (Beach Surf and Paddle Kit)
Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.
Stocked Surfboard Rack (Beach Surf and Paddle Kit)
The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.
Dune Fence Run (Beach Surf and Paddle Kit)
2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.
Warning Flag Pole (Beach Surf and Paddle Kit)
3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.
Beach Umbrella (Beach Surf and Paddle Kit)
2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.
Surf Wax Kit (Beach Surf and Paddle Kit)
Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.
Folding Beach Chair (Beach Surf and Paddle Kit)
Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.
Driftwood Log (Beach Surf and Paddle Kit)
2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.
Lifeguard Megaphone (Beach Surf and Paddle Kit)
Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.
Visitor Tasting Counter (Distillery and Bonded Warehouse)
Visitor tasting counter 2.8 x 1.1 m and 1.8 m to the back shelf: a cask staved oak front with iron bands, a plank top, six nosing glasses on a tray, a water jug, two unlabelled bottles and seven more glasses upended on the shelf behind. Nothing carries a label.
Similar assets
Kitchen worktop with hob cut out (Fitted Kitchen and Bathroom Builder)
1.2 m worktop section with a 560 by 490 mm hob aperture and chamfered cut edges.
Promenade railing section (Amusement Arcade and Seaside Pier)
The heavier seafront railing at the top of the beach: turned cast iron standards, a tubular top rail, a mid and kick rail, and a roundel in each of the four bays. It couples to the pier railing on the same ports.
AnimatedKitchen base unit 400 (Fitted Kitchen and Bathroom Builder)
400 mm fitted kitchen base unit with an 18 mm carcass, recessed plinth, internal shelf and a single shaker door on named hinge pivots.
AnimatedKitchen sink base unit 600 (Fitted Kitchen and Bathroom Builder)
600 mm sink base with a stainless bowl set into the worktop, a fixed false front, an open interior and a visible bottle trap and supply risers.
AnimatedKitchen base unit 600 with hob cut out (Fitted Kitchen and Bathroom Builder)
600 mm base unit whose integral worktop carries a 560 by 490 mm hob aperture, with a pan drawer bank below.
Kitchen Counter Run with Sink (Village Hall and Community Events)
A 2 m kitchen counter run at 900 mm: a white carcass on a blue plinth under a stainless worktop with an inset sink, a pressed drainer, a brass mixer tap and two cupboard fronts on rail handles. The cupboard fronts are geometry and do not open.
Pier railing section (Amusement Arcade and Seaside Pier)
A 4 m run of the pier railing: two standards with ball finials, a moulded top rail, a mid rail and a kick rail, and ten turned balusters between them, in the pier's bottle green cast iron.
AnimatedKitchen four drawer base unit 600 (Fitted Kitchen and Bathroom Builder)
600 mm four drawer base unit: one shallow and three graduated deep drawer fronts, each a named node pivoted on its slide axis.
Kitchen open shelf base unit 400 (Fitted Kitchen and Bathroom Builder)
400 mm open base unit with two timber lined shelves and chamfered edge posts, used to break a run of doors.
AnimatedKitchen wall unit 400 (Fitted Kitchen and Bathroom Builder)
400 mm fitted wall unit with an 18 mm carcass, one internal shelf and a single shaker door on named hinge pivots.
Kitchen tall open shelving 400 (Fitted Kitchen and Bathroom Builder)
400 mm full height open shelving with five timber lined shelves, used to end a tall run.
Kitchen worktop run 2 m (Fitted Kitchen and Bathroom Builder)
2 m worktop run, 615 mm deep and 30 mm thick, with a chamfered square edge that overhangs the fronts by 15 mm.