3D Assets
@3dassets
Apartment Block Floor Tile (Cyberpunk Apartment and Neon Block)
A 1.2 m square screed floor tile, 56 mm thick, with a rubber expansion joint let into two edges. Ports on all four edge midpoints tile a cell, a corridor or a whole landing in either direction.
Apartment Block Wall Module, Tiled (Cyberpunk Apartment and Neon Block)
The same 1.2 by 2.7 m module tiled in small squares with a grout relief on both faces, for wet cells, the laundry and the shared wash room. Same ports as the plain module.
Apartment Block Wall Module (Cyberpunk Apartment and Neon Block)
A 1.2 by 2.7 m partition module for a subdivided apartment block, 120 mm over a concrete core and dressed on both faces with a dark polymer skin, a steel kick strip and a single trim line.
Corridor Wall Run with Pipes (Cyberpunk Apartment and Neon Block)
A 1.2 by 2.7 m corridor module: bare concrete with a painted dado band and an amber trim line, carrying a 96 mm service main, a 68 mm riser, a conduit tray on two brackets and a junction box with its drop.
Apartment Block Wall Module, Service Panelled (Cyberpunk Apartment and Neon Block)
The same 1.2 by 2.7 m module dressed as a serviced wall: two rows of bolted access panels either side of a steel cable tray line, with rivet heads above, on both faces. Use it where a cell backs onto plant without changing the grid.
Newspaper Works Floor (Printing Press and Newspaper Office)
A 36 by 24 m newspaper works built from the wall and floor kit and left open topped on purpose, so the whole floor is walkable and in view from above: the back wall and both end walls are up, with factory windows and goods doors in them, and the overhead line shafting runs on...
Dispatch Bay and Reel Store (Printing Press and Newspaper Office)
A 12 by 12 m roofed dispatch shed beside the press hall, built from the same kit: brick and window bays on three sides with goods doors at the back and the end, three 12 m trusses on the walls and eight roof deck bays with their glazed strips over them. Inside, a bay of line...
Works Staircase (Printing Press and Newspaper Office)
Free 3D model of a works staircase: a 3.2 m run of iron stairs rising 2.8 m to a railed landing, for a printing works game asset kit.
AnimatedCounter Front With Hatch (Printing Press and Newspaper Office)
Free 3D model of a newspaper office front counter: a 3 m panelled oak counter with a brass grille and a lifting hatch, as a game asset.
Floor Drain (Printing Press and Newspaper Office)
Free 3D model of a works floor drain: a 0.72 m iron grating set in a concrete surround, as a game asset.
AnimatedElectric Motor (Printing Press and Newspaper Office)
Free 3D model of an electric drive motor on a plinth: a 1.1 m ribbed motor with a starter box and a turning drive pulley, for a printing works game asset kit.
AnimatedBelt Drop Drive (Printing Press and Newspaper Office)
Free 3D model of a belt drop from overhead line shafting: a 4.2 m countershaft pedestal with a turning pulley and a flat leather belt running up to the shaft, as a game asset.
AnimatedLine Shafting Bay (Printing Press and Newspaper Office)
Free 3D model of a 6 m bay of overhead line shafting: a turning steel shaft on two iron hangers with four drive pulleys, for a printing works game asset kit.
Roof Truss Bay (Printing Press and Newspaper Office)
Free 3D model of a 12 m works roof truss: a riveted iron king post truss with seat plates at both ends, for a printing works game asset kit.
Roof Deck Bay (Printing Press and Newspaper Office)
Free 3D model of a 3 m roof deck bay with a glazed strip: a boarded works roof panel on a 3 m module, as a game asset.
Works Floor Tile (Printing Press and Newspaper Office)
Free 3D model of a 6 m works floor tile: a concrete bay with recessed joint strips for a printing works game asset kit.
Office Floor Tile (Printing Press and Newspaper Office)
Free 3D model of a 6 m boarded office floor tile: a timber floor bay for a newspaper office game asset kit.
Window Wall Bay (Printing Press and Newspaper Office)
Free 3D model of a modular works wall bay with a factory window: a 3 m brick panel with a 2.1 by 2.6 m steel framed nine light window, as a game asset.
AnimatedDoor Wall Bay (Printing Press and Newspaper Office)
Free 3D model of a modular works wall bay with double doors: a 3 m brick panel with a 2.2 by 3.2 m boarded pair of doors that swing open, as a game asset.
News Board (Printing Press and Newspaper Office)
Free 3D model of a newsvendors A board: a 1.65 m timber bill board carrying blank posters on both faces, as a game asset.
Brick Wall Bay (Printing Press and Newspaper Office)
Free 3D model of a modular brick works wall bay: a 3 m by 4.8 m industrial wall panel with a plinth, a capping band and an internal pilaster, as a game asset.
Subs Table (Printing Press and Newspaper Office)
Free 3D model of a sub editors table: a 2.6 m oak table spread with blank copy, paste pots and shears, for a newspaper office game asset kit.
Proof Board (Printing Press and Newspaper Office)
Free 3D model of a proof board: a 1.6 m free standing pin board hung with eight blank page proofs, for a newspaper office game asset kit.
AnimatedPhoto Enlarger (Printing Press and Newspaper Office)
Free 3D model of a photographic enlarger: a 1.5 m column enlarger on a baseboard with a head that runs up and down, for a newspaper office game asset kit.