3D Assets
@3dassets
Blacksmith Workshop (Feudal Japan Castle Town)
Smithy with projecting forge chimney and anvil bench.
Shrine Office (Feudal Japan Castle Town)
Shrine office with a red entrance valance and reception veranda.
Tea point island (Office Lobby and Building Facilities)
A 1.4 m by 0.9 m tea point island: a double-sided carcass on a recessed plinth, a bullnose worktop with an inset sink and mixer, two bin apertures with rimmed flaps, a rear open shelf and an accent rail on the standing side.
AnimatedKitchenette wall cupboard, 600 mm (Office Lobby and Building Facilities)
A 600 mm kitchenette wall cupboard 720 mm high and 340 mm deep: a chamfered carcass with an internal shelf, two doors on rail handles as named pivoted nodes and two fixing brackets.
AnimatedStaff kitchenette run (Office Lobby and Building Facilities)
A 1.8 m staff kitchenette run: an 18 mm carcass on a recessed plinth with an inset stainless sink and pillar mixer, a postformed worktop and splashback, two doors, a three-drawer bank, an appliance void and a wall cupboard row with an accent light channel.
Sake Brewery (Feudal Japan Castle Town)
Brewery workshop with large casks and hanging cedar-ball-style marker.
Plant room air handling unit (Office Lobby and Building Facilities)
A 2.4 m by 1.5 m plant room air handling unit 1.0 m deep: a sectional casing on an anti-vibration base with three access doors, latches and hinges, a filter sight glass, a fan inspection window, a control panel, two flanged duct spigots and a condensate drain.
Bath House (Feudal Japan Castle Town)
Bath house with a tall rear chimney and split entrance curtain.
Tea House (Feudal Japan Castle Town)
Low tea house with generous veranda facing a garden.
Roadside Inn (Feudal Japan Castle Town)
Two-storey inn with an upper timber balcony and broad roof.
Raised access floor tile, lifted (Office Lobby and Building Facilities)
The same raised floor bay with the tile lifted through twenty-four degrees on its edge as a named pivoted node, and a twin-cup suction lifter resting on it.
Cable ladder bend (Office Lobby and Building Facilities)
A 1.2 m cable ladder right-angle bend: swept outer and inner rails top and bottom on vertical posts, fanned rungs through the turn and splice plates on both openings.
Raised access floor tile (Office Lobby and Building Facilities)
A 600 mm raised access floor tile on four adjustable pedestals at 150 mm: threaded pedestal heads, stringer rails and a chamfered tile with a wear layer.
Townhouse Corner (Feudal Japan Castle Town)
Corner townhouse with side entrance and projecting side veranda.
Cable ladder run, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m cable ladder run 450 mm wide: two chamfered side rails on 100 mm sections with five rungs, splice plates at both ends and two drop rod brackets.
Merchant House (Feudal Japan Castle Town)
Broad merchant residence with deep street veranda and side display window.
Townhouse Middle (Feudal Japan Castle Town)
Narrow continuous-row townhouse with a street awning.
Townhouse Courtyard (Feudal Japan Castle Town)
Paired street wings separated by a narrow open courtyard deck.
UPS cabinet (Office Lobby and Building Facilities)
A 0.6 m by 1.85 m UPS cabinet 0.85 m deep: a chamfered case on a plinth with a control display and four indicator lamps, four battery drawer fronts with pull rails and a rear extract grille.
In-row cooling unit (Office Lobby and Building Facilities)
A 300 mm in-row cooling unit on the 2.0 m rack line: a rack-format frame with a full-height louvred front, three fan assemblies, a control display and chilled water pipework rising at the rear.
Floor power distribution unit (Office Lobby and Building Facilities)
A 0.34 m by 1.8 m floor power distribution unit: a chamfered column on a plinth with a metering display, five outlet banks of six sockets, a louvred vent and a top cable gland.
Patch panel, 24 port (Office Lobby and Building Facilities)
A 0.485 m 24-port patch panel with rack ears: two rows of twelve chamfered outlets with accent port markers and a front cable management bar with five formed cable hoops.
AnimatedWall-mount comms cabinet (Office Lobby and Building Facilities)
A 0.62 m by 0.66 m wall-mount comms cabinet 0.42 m deep: a welded case with two mounting rails, a patch bank and two switches, a roof extract grille and a glazed hinged door as a named pivoted node.
Animated42U server rack with mesh doors (Office Lobby and Building Facilities)
The same 42U rack fitted with perforated mesh doors front and rear, each a named node pivoted on its hinge edge with a swing handle.