3D Assets
@3dassets
Wall Tank Module End (Public Aquarium and Marine Centre)
The wall tank bay with a solid return panel closing the right hand end of a run, so a gallery wall stops cleanly instead of showing a cut glass edge.
Nightclub Main Room (Nightclub and DJ Booth)
A whole small club laid out from the pack's own kit on its own floor: a 12 by 10 m room of 2 m club floor tiles with a 4 m LED dance floor chequered into the middle of it. At one end the DJ booth stands on three riser modules behind a run of facade panels, with the decks,...
AnimatedCleaning Trolley (Nightclub and DJ Booth)
A housekeeping trolley: a wheeled frame with a magenta mop bucket and wringer, a bottle shelf with two spray bottles, a bag hoop with its sack in it and a mop stood in the corner.
Fire Exit Sign (Nightclub and DJ Booth)
A 340 mm square fire exit sign: the same backing plate with a lit cyan face and a pale running figure and arrow, for the exit route out of the dance floor.
Club Waste Bin (Nightclub and DJ Booth)
A 780 mm round waste bin: a grey body with a brushed rim ring, a dark drop-in top and a magenta liner pulled over the rim.
Toilet Door Sign (Nightclub and DJ Booth)
A 340 mm square toilet door sign: a dark backing plate with a pale face and a raised magenta pictogram of two figures, for the doors off the club corridor.
Wall Air Vent (Nightclub and DJ Booth)
A 600 by 400 mm extract vent: a pressed grille with seven raked blades in a brushed frame, for the wall above the bar or beside the toilets where a club has to move its air.
Acoustic Wall Panel (Nightclub and DJ Booth)
A 1.2 by 0.9 m acoustic wall panel: a velvet faced absorber in a dark frame with brushed stiles and nine magenta flutes across the face, ported on both stiles so panels run along a wall without a gap.
Cloakroom Counter with Rails (Nightclub and DJ Booth)
A cloakroom position: a 1.8 m timber counter with a pale stone top, a magenta light panel on the customer face and a numbered ticket block, backed by a hanging rail on two stands carrying nine empty hangers.
Ceiling Truss Grid Module (Nightclub and DJ Booth)
The junction block a ceiling truss grid is built from: a 300 mm cube with half metre arms on all four sides and spigot plates on every one, so straight bays run out of it in both directions and a grid closes on a 3 m pitch.
Door Host Podium (Nightclub and DJ Booth)
A door host podium: a 700 mm raked lectern in dark laminate with a pale top, a brass pen ledge, the guest list lying on it, a gooseneck reading lamp and a magenta light strip across the kick.
AnimatedEntrance Door Module (Nightclub and DJ Booth)
A 1.2 by 2.6 m wall module with the club entrance in it: a timber leaf 960 mm wide in a brushed metal lining with a mirrored vision panel and a full height pull bar, on the same wall ports as the mirror panel so a door drops into any run.
Raised Seating Booth, Teal (Nightclub and DJ Booth)
The raised club booth upholstered in teal instead of red, for alternating booths down a wall so a row of them does not read as one repeated object.
Queue Barrier Post with Belt (Nightclub and DJ Booth)
A retractable belt barrier post: a weighted base, a 980 mm column with the cassette head and a 2 m magenta webbing belt pulled out to its clip, for the queue outside the door and the line to the cloakroom.
Rope Barrier Post with Rope (Nightclub and DJ Booth)
A chrome rope barrier post with its rope: a weighted base, a 980 mm column with a ball top and eyes on both sides, and a 1.6 m red velvet rope hanging in a real catenary with brass end hooks to the next post along +X.
Raised Seating Booth with Table (Nightclub and DJ Booth)
A raised club booth: a 2.4 by 1.5 m platform with a brass step nosing, a horseshoe banquette in deep red velvet on timber bases with a capping rail, and a pale topped pedestal table laid with an ice bucket and two glasses.
Club Floor Tile (Nightclub and DJ Booth)
A 2 m square club floor tile 80 mm deep: a dark tray with a poured grey resin face divided by brushed aluminium strips, ported on all four edges so a whole room is laid from repeats of one model.
Overhead Glass Rack (Nightclub and DJ Booth)
A 1.2 m hanging stemware rack: a channel frame on four drop rods with fifteen stemmed glasses hung upside down by their feet, and mounting plates on top.
Bottle Crate (Nightclub and DJ Booth)
A magenta plastic bottle crate packed with twelve bottles: pierced walls with moulded handholds, a ribbed base and green glass with gold caps standing proud of the rim.
Bar Stool (Nightclub and DJ Booth)
A 760 mm bar stool: a weighted pedestal base with a brushed foot ring, a crowned velvet seat pad on a dark rim and a low chrome back rest.
Bar Till Screen (Nightclub and DJ Booth)
A till terminal for the bar top: a raked touch screen with a pale key overlay on a weighted pedestal arm, 420 mm tall, with the card reader plate beside the foot.
Ice Well with Speed Rail (Nightclub and DJ Booth)
A stainless ice well: a 500 mm under counter unit with a bed of ice below the rim, six mixer bottles standing in it, a scoop hooked on the end and a speed rail hung on the customer side.
AnimatedCocktail Station (Nightclub and DJ Booth)
A 900 mm cocktail station: a stainless unit with a pale worktop laid up with a shaker, a jigger, a strainer, three garnish pots of citrus and a muddler, over a tool drawer on runners.
AnimatedUnder Bar Glass Washer (Nightclub and DJ Booth)
An under counter glass washer: a stainless cabinet on adjustable feet with a rack of nine glasses inside, a cyan control panel on the front and a hood that rises straight up off the wash chamber.