3D Assets
@3dassets
Shoulder Pads on a Hanger (Ice Hockey Arena and Locker Room)
A set of shoulder pads on a hanger: a white chest shell with blue caps and bicep guards and a red collar roll. Hang it at a stall hook. The shoulder straps are static.
Jersey on a Hanger (Ice Hockey Arena and Locker Room)
A blue game jersey with white and red waist stripes and a blank white number panel, hanging on a wire hanger. Hang it at a stall hook: the model rests on y=0 with the hook 850 mm above it, so place it at the hook height. The cloth is a rigid shell, not simulated.
Locker Room Stall Unit (Ice Hockey Arena and Locker Room)
A 1.2 m locker room stall 2.05 m tall: a timber back panel and cheeks, a bench seat at 460 mm, a boot shelf under it, a top shelf, three hooks and a blue name plate. Units butt on the 1.2 m module through stall-left and stall-right, so a run of them lines a wall.
Interlocking Rubber Floor Tile (Ice Hockey Arena and Locker Room)
A 1 m interlocking rubber locker room tile, 20 mm thick, with three teeth on each of its +X and +Z edges and the matching channel on the other two. The wearing face carries the moulded stud pattern a skate blade can be walked over.
Hockey Gloves (Ice Hockey Arena and Locker Room)
A pair of hockey gloves sitting palm down: blue backs with segmented fingers, white flared cuffs, red thumbs and a cuff trim. Modelled as one pair in one file, so a stall is dressed with one placement.
Hockey Kit Bag (Ice Hockey Arena and Locker Room)
A 1 m wheeled kit bag: a dark holdall on a rubber base rail with a zip run, a blue panel and static carry straps. Webbing and zips do not move.
Player Helmet with Cage (Ice Hockey Arena and Locker Room)
A red player helmet standing on its own rim as it stands on a stall shelf: a vented two piece shell with a white brow rim, a dark liner edge, ear covers with adjuster discs, and a steel cage clipped to the shell at both sides over a white chin cup. The chin strap is static.
Goalie Skate (Ice Hockey Arena and Locker Room)
The goalkeeper cut of the same skate: a lower, wider white boot with a blue cowling over the toe and a flatter runner. Sits noticeably lower than the player skate beside it.
Goalie Stick (Ice Hockey Arena and Locker Room)
A goalkeeper stick lying flat: a taped butt and knob, a shaft stepping into a 580 mm white paddle with a blue heel band, and a 340 mm blade at the lie angle wrapped with blue tape. Bigger in every dimension than a player stick beside it.
Player Skate (Ice Hockey Arena and Locker Room)
A senior player skate: a dark composite boot with a red heel counter, a padded tongue, laced eyelets and a steel runner in a frame holder. Heel at the origin, toe toward +Z.
Goalie Mask (Ice Hockey Arena and Locker Room)
A goalkeeper mask standing on its chin: a blue shell with a white brow plate and a red top stripe, a steel cat eye cage and a separate backplate. The harness webbing is static.
Goalie Leg Pads (Ice Hockey Arena and Locker Room)
A pair of 920 mm goalkeeper leg pads standing on their toes as they stand in a stall: white faces with blue roll segments, red knee stacks and the outer roll that gives a pad its silhouette. The straps are modelled flat against the pad and do not move.
Hockey Stick, Toe Curve (Ice Hockey Arena and Locker Room)
The same stick with a toe curve blade: a straight heel opening into a hooked toe, longer and narrower, for a quick release.
Hockey Stick, Heel Curve (Ice Hockey Arena and Locker Room)
The same stick with a heel curve blade: the bend sits right at the heel and the toe runs straight off it, the pattern a player who shoots off the back foot picks.
Hockey Stick (Ice Hockey Arena and Locker Room)
A 1.32 m senior hockey stick lying flat as it lies on the ice: a taped butt and knob, a composite shaft and a 300 mm mid curve blade set at the lie angle, wrapped with white tape. The blade curve is modelled, not textured.
Ice Hockey Puck (Ice Hockey Arena and Locker Room)
A regulation vulcanised rubber puck, 76 mm across and 25.4 mm thick, with the milled edge chamfers. Lies flat on the ice.
Puck Bucket (Ice Hockey Arena and Locker Room)
A 440 mm blue bucket with a steel rim and lifting lugs, filled with practice pucks. The pucks are part of the model; the separate puck design is the one to place loose on the ice.
Goal Anchor Peg Set (Ice Hockey Arena and Locker Room)
A tray of four steel goal anchor pegs with red collars and the drift used to set them, for pinning a goal frame into the ice. One placement beside the crease.
Flood Hose Reel (Ice Hockey Arena and Locker Room)
A 760 mm flood hose reel on a steel base: a drum between two frames wound with hose, and a red cranked handle. The hose is a static coil, since a flexible run is not reachable with a rigid node transform, and the drum is modelled fixed for the same reason the coil is.
Training Cone Set (Ice Hockey Arena and Locker Room)
Five 310 mm training cones on square bases with reflective collars, set out as a drill lane. Placed as one model so a skills drill is one placement; the cones do not separate.
Ice Snow Bucket (Ice Hockey Arena and Locker Room)
A 680 mm yellow snow tub with a rolled rim, lifting lugs and a steel bail, heaped with scraped snow. The snow is modelled as a solid cap, not a particle system.
Ice Snow Shovel (Ice Hockey Arena and Locker Room)
A 560 mm bladed snow shovel with a blue scoop, a steel wear strip and a long timber handle, for clearing the snow a scrape leaves at the boards.
Hand Ice Scraper (Ice Hockey Arena and Locker Room)
A 520 mm hand ice scraper: a wide steel blade in a dark stock on a long timber handle, for cutting ridges and edges the resurfacer cannot reach.
AnimatedIce Resurfacer (Ice Hockey Arena and Locker Room)
A 4.4 m ice resurfacer: a blue snow tank on a steel chassis with a yellow cap rail, an open cab with a seat, wheel and canopy, and a full width conditioner at the tail carrying the wash brush.