3D Assets
@3dassets
Spittoon Unit (Dental Practice and Surgery)
A pedestal spittoon: a ceramic funnel bowl with a stainless rim and rinse spout, and a swing out cup holder with a rinse cup in it.
Intraoral Xray Arm (Dental Practice and Surgery)
A wall mounted intraoral x ray set: a backplate and control box carrying a scissor arm, a tube head on its yoke and a rectangular collimator.
Surgery Monitor Arm (Dental Practice and Surgery)
A pole mounted surgery monitor: a weighted base and column with a bracket arm carrying a widescreen panel for intraoral images, at the height a seated operator reads it.
Operating Light (Dental Practice and Surgery)
A floor standing operating light: a weighted base and post carrying a jointed arm and a wide reflector head on its yoke, with sterilisable handles under the lens.
Dental Chair Reclined (Dental Practice and Surgery)
The dental chair in the treatment position, back and headrest laid almost flat, for a surgery that should read as mid appointment rather than waiting for one.
Dental Chair (Dental Practice and Surgery)
A dental chair in the upright position: a cast base and lift column under an upholstered seat and leg rest, with a recline back and a sliding headrest on the hinge above it.
Dental Chair Blue (Dental Practice and Surgery)
The dental chair with blue upholstery, for a second surgery that needs to read as a different room from the same camera.
Delivery Unit (Dental Practice and Surgery)
A mobile delivery unit: a castored pedestal carrying a control head and a bracket arm with a tray, three handpieces in their holders and their hose tails.
Club Circuit Corner and Pit Lane (Go Kart Track and Pit Lane)
A club karting circuit on a 56 x 48 m plot laid as one continuous surface: a tarmac straight with the start gantry over it, six grid boxes marked out underneath and karts lined up on them, turning right through a corner tile with a red and white kerb round the apex. The...
Lap Counter Board (Go Kart Track and Pit Lane)
Manual lap counter on a 2.3 m post with a concrete footing: a dark board carrying three white number cards under a yellow header, with a red ledge below for the spare cards. Cards are blank plates; nothing flips.
Trophy Set (Go Kart Track and Pit Lane)
Set of three trophies on a presentation tray: a gold, a silver and a bronze cup on stepped plinths, the tallest 0.65 m, each with two handles. Blank castings with no engraving, ready to stand on a podium or a reception counter.
Podium with Three Steps (Go Kart Track and Pit Lane)
Three step prize podium on a low deck: a 1.05 m centre block in yellow between a 0.76 m and a 0.52 m step, each with a dark tread cap and a blue number plate on its face. Plates are blank blocks and carry no wording.
Vending Machine (Go Kart Track and Pit Lane)
Red drinks and snack vending machine 1.92 m tall with a yellow header, a glazed door showing three shelves of stock, a dispensing flap and a handle. The door swings on its own hinge; the stock is modelled into the door and travels with it.
Litter Bin (Go Kart Track and Pit Lane)
Public litter bin 1.05 m tall: a tapered charcoal body with a yellow band, a foot plate and a blue domed lid hinged along its back edge on its own pivot.
Visitor Bench (Go Kart Track and Pit Lane)
Slatted blue bench 1.7 m long on two steel end frames, with three seat slats and a raked three slat back. Ground origin at the centre of the footprint, so it sits straight on a paddock apron or a viewing area.
Kart Club Reception Counter (Go Kart Track and Pit Lane)
Reception desk for a karting club: a 3.4 m blue counter with a return, a pale worktop, a yellow rail along the public face, a till and card reader, and a results board on posts behind it. Static geometry, nothing opens.
Racing Helmet (Go Kart Track and Pit Lane)
Single full face karting helmet 0.33 m across, red shell with a dark visor band, a chin bar and a small rear spoiler, resting on its own padded ring so it sits level on a shelf, a bench or a tyre stack.
Race Suit on a Hanger (Go Kart Track and Pit Lane)
A single red race suit on a hanger on a weighted floor stand 1.9 m tall, with a black chest band, a yellow flash and a wire hook over the rail. One rigid piece: the suit is solid geometry and does not drape or move.
Grandstand Section (Go Kart Track and Pit Lane)
Six metre grandstand bay: four raked rows of red and blue seat pans on cast concrete steps, yellow side and back rails and steel end frames. Start and end stand ports, so bays run along a straight or round the outside of a corner.
Spectator Fence Section (Go Kart Track and Pit Lane)
Four metre spectator mesh fence 1.85 m high: a welded panel between two steel posts with yellow top and kick rails. Start and end fence ports, so a run closes a viewing line without a gap at the joins.
Helmet and Race Suit Rack (Go Kart Track and Pit Lane)
Hire kit rack 1.9 m wide: two race suits on hangers under a helmet shelf holding two helmets, with a boot shelf below and a welded steel frame. Suits and helmets are modelled solid and none of it moves.
Driver Briefing Board (Go Kart Track and Pit Lane)
Free standing briefing board on an A frame: a white 1.9 m panel under a red header, with a track map blocked out on the left, four ruled lines on the right and a pen tray along the bottom. Markings are plain shapes and carry no wording.
Race Control Tower (Go Kart Track and Pit Lane)
Two storey race control: a 3.6 m concrete base with a door and a louvre band, an external stair with a yellow rail, and a glazed control box above it overhanging the pit lane, with a roof rail, a mast and a results board on its front.
Scoring Screen on a Stand (Go Kart Track and Pit Lane)
Live timing screen 3.7 m tall on a concrete footing and two braced posts: a charcoal case with a blue panel and five yellow result rows, hung on a head rail so the whole screen tilts to the crowd on its own pivot.