3D Assets
@3dassets
National Beehive (Allotments and Community Garden)
A 1.4 m national beehive on a timber stand: a floor, three brood and super boxes with handholds, a crown board and a galvanised roof, with the entrance block at the front. The boxes are modelled as one static stack; nothing lifts off and there are no bees.
Picnic Table (Allotments and Community Garden)
A 1.8 m timber picnic table with benches on both sides, 0.74 m to the table top on crossed A-frame legs. One static solid; the benches are part of the frame.
Hand Painted Site Noticeboard (Allotments and Community Garden)
A 1.8 m hand painted allotment noticeboard on two posts under a little pitched hood, with the site name lettered across the head and four notices pinned to it. The notices are painted geometry and cannot be changed at runtime.
Orchard Apple Tree (Allotments and Community Garden)
A 3.4 m allotment apple tree on a 1.5 m trunk with three low limbs, a broad crown and fruit on it, standing in rough grass. The crown is solid foliage: there is no leaf card, wind or sway.
Hedgerow Section (Allotments and Community Garden)
A 2 m run of mixed boundary hedge 1.5 m high on woody stems, with rough grass at the foot and berries in it. Run ports on both ends, so sections make a boundary of any length.
Timber Fence Panel (Allotments and Community Garden)
A 2 m closeboard fence bay 1.15 m high: two posts, a gravel board, two arris rails and eleven feather edge boards. Run ports on both ends, so bays make a boundary of any length.
Chain Link Fence Panel (Allotments and Community Garden)
A 2 m galvanised chain link bay 1.15 m high on two posts with top and bottom straining wires and a raking stay. The mesh is rigid geometry and does not sag. Run ports on both ends.
AnimatedSite Gate with Padlock (Allotments and Community Garden)
A 2 m allotment site gate: a four rail braced timber leaf hung between two 1.46 m capped posts, with a hasp and a padlock on the closing stile. The leaf is one node on its hinge post, so the clip swings it; the padlock is modelled shut and does not open.
AnimatedChicken Coop with Run (Allotments and Community Garden)
A raised timber coop 1.16 m across on 0.42 m legs with a felt gable roof, a pop hole and ramp, and a 1.7 x 1.1 m netted run on the end. The nest box hatch is one node hinged on its head; the netting, ramp and pop hole are fixed.
Bonfire Ring (Allotments and Community Garden)
A 1.4 m ring of reclaimed bricks round a bed of ash, with half burnt prunings stacked in the middle and a pile of green waste beside it. Nothing burns: there is no fire, smoke or light in the model.
AnimatedHose Reel on a Post (Allotments and Community Garden)
A hose reel on a galvanised bracket bolted to a 0.94 m post, wound with 0.22 m coils and a crank on the side, with the free end run off across the ground. The reel is one node on its axle so the clip spins it; the hose itself is a rigid solid and does not pay out.
Watering Can, Five Litre (Allotments and Community Garden)
The same can at two thirds the size, for seedlings and for a child to carry. The rose, spout and both handles are modelled; nothing moves.
Watering Can, Ten Litre (Allotments and Community Garden)
A galvanised ten litre watering can, 0.42 m to the handle, with a real rose on the end of the spout and a grip at the back. The rose is fixed to the spout and does not come off.
Hoe and Rake (Allotments and Community Garden)
A draw hoe and a seven tine soil rake stood head down in the earth with their 1.5 m ash handles crossing. The heads carry real blades and tines; the pair is one static model.
AnimatedWheelbarrow (Allotments and Community Garden)
A galvanised builders barrow with timber handles, a stub axle and two leg stands, 1.5 m over the handles. The wheel is one node on the axle, so the clip rolls it; the barrow itself does not tip.
Garden Fork and Spade in the Earth (Allotments and Community Garden)
A digging spade and a four tine fork left standing in a heap of turned earth, both 1.15 m to the top of the D handle, with a real blade, tread and shoulder. Static: the tools and the heap are one model.
Tool Rack (Allotments and Community Garden)
A 1.14 m boarded tool rack that leans against a shed wall, with four hooks, a hand fork, a trowel, a ball of twine and a seed box on it. The hung tools are part of the rack and do not come off.
Standpipe and Tap on a Post (Allotments and Community Garden)
The site standpipe: a galvanised riser strapped to a timber post on a concrete pad, 1.2 m to a brass tap with a drip tray and a bucket under it. Nothing turns; the tap head is modelled in one piece.
Pallet Bench (Allotments and Community Garden)
A bench knocked together from two pallets with a third stood up behind for a back, 1.2 m wide with a cushion on the seat. The pallets are one static solid.
Striped Deckchair (Allotments and Community Garden)
A folding timber deckchair set up on the plot, 0.86 m to the head of the frame with a striped canvas sling. It is modelled in the open position: the frame is one solid and does not fold.
Water Butt on a Stand (Allotments and Community Garden)
A 1.6 m green plastic water butt on a timber stand, tapped at the foot with the bucket height a can needs, and fed by a galvanised downpipe swanning over into the lid. The tap and the downpipe are fixed: there is no water volume and no flow.
AnimatedAllotment Shed, Patched and Weathered (Allotments and Community Garden)
The same shed after a few hard winters: corrugated sheet nailed over the rotted boards, a patch on the felt, moss growing on the roof, a plank propped against the corner and the paint gone from the door. The door still opens; the propped plank and the patches are fixed.
AnimatedTimber Framed Greenhouse (Allotments and Community Garden)
A 2 x 2.6 m cedar framed greenhouse, 1.5 m to the eaves and 2.26 m to the ridge, glazed all round and over, with staging and pots inside and a side hung door. The door is the only moving part; the roof vents are fixed lights.
Lean To Greenhouse (Allotments and Community Garden)
A 2.2 m lean to greenhouse built against a 2.15 m back wall, its glazing falling to 1.15 m at the front in four timber framed lights, with staging of pots and seed trays along the back. It has no door and nothing on it moves; the glazing is solid geometry.