Loading model
About
Everything needed to build a street food market and park the trucks that trade at it. The fleet is a step front food truck with a cab, a box body, a 2.1 m serving hatch over a timber counter and an awning above it, the same truck shipped with the hatch already open and in two more liveries, a coffee van, an ice cream van with a roof cone, a towed pizza trailer with an oven flue, an insulated chiller trailer with a hinged tail door and a three wheeled food tuk tuk. The stalls are a 3 m pop up gazebo with a canopy and a counter, the same gazebo as a bare frame to dress, a trestle stall with an awning in two colours, a grill station with an extractor hood, a wok and crepe station, a bar stall with taps, and the signage around them: menu boards, a chalkboard A frame, pitch number signs and a market parasol. Four things tile on real connector ports: 4 m paved and cobbled floor tiles, 2 m stall counter modules, 2 m queue rail bays and 6 m festoon lighting bays, and the starter scene is assembled from all four. Seating is picnic benches, high tables, stools and pallet units; the service kit is bins, a three stream recycling station, hand wash points, a generator, a gas bottle cage, a water butt, a fire point, cool boxes and crate stacks. The counters are dressed with trays of burger and chips, a pizza on a board, coffee cups, bottle crates, sauces, a napkin caddy, a produce crate, a cake stand under a dome and a till. Clips are rigid node transforms only: wheels roll, serving hatches lift, the chiller door swings, bin, cool box and cake dome lids open and close, the till drawer runs out and the hood fan spins. Canopies, awnings, valances, cloths, the festoon cord and its bulbs, the tuk tuk roof and the chalkboard hinge are modelled solid and stated static, because fabric and folding linkages need a joint per element that a rigid node cannot give; there is no steam, flame, smoke or crowd. Stall names, liveries and menu boards are invented and copy no real trader, chain or brand. Original AI-generated CC0 geometry, prepared for human review. No physics, gameplay, colliders, navigation or embedded lights.
Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the pack.
Use the “Street Food Market and Food Trucks” pack in my project. Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/street-food-market-and-food-trucks Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/34323/v1/model.glb Pack page: https://3dassets.dev/packs/street-food-market-and-food-trucks Description: 48 stylized street food market models: food trucks, vans and trailers with rolling wheels and lifting serving hatches, gazebo, trestle, grill, wok and bar stalls, ported floor tiles, counters, queue rail and festoon lighting, seating, service kit and the food left on the tables. - 49 GLB models, 2.2 MB in total - Units: metres, +Y up, shared scale and palette across the pack - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.
Also available as a JSON manifest or via the MCP server.
Common questions
How do I use Street Food Market and Food Trucks with my AI development tools?
How do I get started?
Which game engines and tools can I use Street Food Market and Food Trucks with?
How do I import this pack into Unity, Godot, Unreal or Blender?
Can I use Street Food Market and Food Trucks in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Do I have to download the whole pack?
Do the models in Street Food Market and Food Trucks fit together?
Game kit
Street Food Market and Food Trucks
48 stylized street food market models: food trucks, vans and trailers with rolling wheels and lifting serving hatches, gazebo, trestle, grill, wok and bar stalls, ported floor tiles, counters, queue rail and festoon lighting, seating, service kit and the food left on the tables.
One GLB with every piece placed in a starter scene. Each model is also below on its own.
View demoEverything in this pack
AnimatedFood Truck with Serving Hatch (Street Food Market and Food Trucks)
A 6.4 m step front food truck: a glazed cab, a taller box body behind it, a 2.1 m serving aperture in the kerb side with a timber counter lip, a striped awning on two struts over the counter and a roof menu header. The hatch is one rigid leaf and all four wheels roll.
AnimatedFood Truck Serving Open (Street Food Market and Food Trucks)
The same food truck with its serving hatch already propped open over the counter, for dressing a market that is trading. The hatch pose is baked into the geometry so it ships open and stays open; the wheels still roll.
AnimatedFood Truck Green Livery (Street Food Market and Food Trucks)
The food truck repainted into the second house livery, market green over the same yellow awning and waist stripe. The geometry, the hatch and the wheels are identical to the red truck.
AnimatedFood Truck Yellow Livery (Street Food Market and Food Trucks)
The food truck repainted into the third house livery, yellow body over red trim, so a rank of three trucks never repeats a colour. The geometry, the hatch and the wheels are identical to the red truck.
AnimatedCoffee Van (Street Food Market and Food Trucks)
A 4.8 m panel van converted to a coffee bar: a low glazed cab, a 1.5 m serving aperture in the kerb side with a counter lip and an awning, and a roof header board. Shorter and lower than the food truck, so a pitch can take both. Four rolling wheels and a lifting hatch.
AnimatedPizza Trailer with Chimney (Street Food Market and Food Trucks)
A 3.6 m towed pizza trailer: a box body on a single axle with a drawbar, a jockey wheel and two corner steadies, a 1.6 m serving hatch with a counter and an awning, and a steel oven flue with a cowl through the roof. The wheels roll and the hatch lifts.
AnimatedIce Cream Van (Street Food Market and Food Trucks)
A 5.2 m ice cream van: a glazed cab, a tall box body with a fixed glazed serving window and a timber counter over the kerb side, and a cone on a plinth on the roof. The serving window is solid glazing rather than a hatch, so only the four wheels move.
AnimatedChiller Trailer (Street Food Market and Food Trucks)
A 3.4 m insulated chiller trailer: a white box on a single axle with a drawbar and steadies, a red stripe and a green livery panel down both sides, a refrigeration unit on the front wall and two tail doors, the right hand one on its own hinge. The left leaf is static.
AnimatedStreet Food Tuk Tuk (Street Food Market and Food Trucks)
A 3.4 m three wheeled food tuk tuk: a domed cab with a screen and a fabric canopy on hoops, an open timber cargo deck with side boards, and a fold down serving board across the tail. Three wheels roll; the canopy, the screen and the fork are rigid.
Gazebo Stall with Canopy (Street Food Market and Food Trucks)
A 3 m square pop up gazebo pitch: four steel legs on footplates, an eaves frame with rafters to the ridge, a red pitched canopy with a scalloped valance, a back and two side sheets, a timber serving counter across the front and a painted name board over it.
Market Stall Frame Bare (Street Food Market and Food Trucks)
The same 3 m gazebo reduced to its frame: four legs on footplates, the eaves frame and the rafters, with no canopy, sheets, counter or board, so a developer can dress the pitch with the pack counter modules, awnings and signage of their own choosing.
Trestle Stall with Awning (Street Food Market and Food Trucks)
A 2.6 m trestle stall: a timber table on two A frames with a cloth to the ground, three trays of produce on the top, a back frame with a painted name board and a green flat awning on two struts over the front with a valance. The fabric is rigid and does not flap.
Trestle Stall Red Awning (Street Food Market and Food Trucks)
The trestle stall with its awning, valance and cloth in the second market colour, red instead of green, so a run of stalls beside one another never repeats. The geometry and the produce trays are unchanged.
AnimatedGrill Stall with Hood (Street Food Market and Food Trucks)
A 2.2 m grill station: a charcoal counter with a recessed griddle bed under seven steel bars, a warming plate at one end, a stainless extractor hood on two uprights with a flue, and a red header board. The hood fan spins; the flue, the bars and the burners are static.
Wok and Crepe Station (Street Food Market and Food Trucks)
A 2 m wok and crepe station: a stainless counter with two sunken wok wells and their pans, a round crepe plate between them, an ingredient shelf on the back uprights with five squeeze bottles and a green header board. Everything on it is static.
Bar Stall with Taps (Street Food Market and Food Trucks)
A 2.4 m bar stall: a timber counter with a steel tap font of three taps over a drip tray, two back shelves of bottles on the uprights and a red header board. The taps, the bottles and the glassware are static solids.
Stall Counter Module (Street Food Market and Food Trucks)
A 2 m serving counter module at 950 mm: a timber fascia with a kick recess and a yellow rail, a steel worktop overhanging it and two feet set in from the ends so modules butt into a run of any length. End ports on both ends.
Menu Board on Legs (Street Food Market and Food Trucks)
A 1.5 m menu board at 1.95 m on two steel legs with footplates: a charcoal panel with a red header strip and five painted price lines under it, plus a timber shelf along the bottom edge. The lines are painted blocks, not readable text. Static.
Chalkboard A Frame (Street Food Market and Food Trucks)
A 1.05 m pavement A frame: two chalk panels in timber frames leaned together with a steel spreader bar between them, three painted chalk lines on each face. The hinge is solid and the frame does not fold, because the two panels share no node a rigid transform could drive.
String Light Run on Poles (Street Food Market and Food Trucks)
A 6 m bay of festoon lighting: a 3.6 m steel pole on a base plate with a cross arm, and a sagging cord of eight bulbs leaving it. Bays butt pole to span so a row of them lights a whole market. The cord is rigid and the bulbs do not emit light.
Stall Number Sign (Street Food Market and Food Trucks)
A 2.2 m pitch number sign on a cast base: a red plate with a yellow number panel and a charcoal name strip under it. The number is a painted block, not readable text, so one model serves every pitch on a market. Static.
Market Parasol (Street Food Market and Food Trucks)
A 2.7 m parasol on a weighted base: an eight panel red canopy on steel ribs with a scalloped hem, a cap and a finial. Sized to shade a high table or the end of a picnic bench. The canopy is rigid and cannot be closed.
Market Floor Tile (Street Food Market and Food Trucks)
A 4 x 4 m paved market floor tile: a 100 mm concrete slab with a charcoal joint cross and an inset joint round the edge, so a run of tiles reads as paving rather than as one flat sheet. Four edge ports; tiles butt into a yard of any size.
Market Floor Tile Cobble (Street Food Market and Food Trucks)
The same 4 m floor module in setts: a charcoal bed with twenty five raised stones in two greys on it, for the older half of a market square or the strip a run of trucks parks on. Same four edge ports and the same 100 mm datum as the paved tile.
Picnic Bench (Street Food Market and Food Trucks)
A 1.8 m picnic bench: a four slat timber top at 780 mm on two splayed steel A frames with a tie bar between them, and a fixed bench plank down each side at 490 mm. Seats about six. Static timber and steel; nothing folds.
High Table (Street Food Market and Food Trucks)
A 1.12 m poseur table: a round timber top 1.04 m across on a steel column and a weighted charcoal base, with a steel rim under the top. The height a market crowd eats standing at. Static.
Bar Stool (Street Food Market and Food Trucks)
A 1.06 m bar stool: a timber seat at 790 mm on a steel column with a footring and a weighted base, and a red back rail on two posts behind it. Sized to the high table and the bar stall counter. Static.
Pallet Seating Unit (Street Food Market and Food Trucks)
A 1.2 m pallet bench: two stacked timber pallets with a red cushion on top and a third pallet leaned back as a rest, with a yellow cap rail. The kind of seating a market builds from what it already has. Static.
Planter with Shrub (Street Food Market and Food Trucks)
A 900 mm timber market planter: a slatted box with a charcoal liner, a soil bed and a clipped shrub of three faceted crowns. Used to close the end of a run of stalls or to hold a queue line. Static foliage; no wind.
AnimatedMarket Bin (Street Food Market and Food Trucks)
A 1.04 m market litter bin: a tapered charcoal body with a steel band, a yellow label plate and a domed steel lid hinged along its back edge with a grab tab. The lid opens and closes; the liner is not modelled.
Recycling Station (Street Food Market and Food Trucks)
A 1.86 m three stream recycling station: green, yellow and red bins in a charcoal cradle, each with a slotted lid and a painted label panel, under a header board on two posts. The lids are part of the bodies and do not open.
Hand Wash Station (Street Food Market and Food Trucks)
A 1.76 m portable hand wash unit: a steel cabinet on a charcoal plinth with a basin let into the top, a swan neck tap and a lever, a green water tank on the back with a yellow label and a soap dispenser on the side. Nothing moves.
Portable Generator (Street Food Market and Food Trucks)
A 940 mm site generator: a yellow acoustic case on a charcoal skid with a louvred side, a charcoal top panel, an exhaust stack, a red control box with a lifting handle and a painted rating plate. Static; the engine and the socket panel are solid.
Gas Bottle Cage (Street Food Market and Food Trucks)
A 1.3 m gas bottle cage: a welded steel frame on a charcoal base with barred sides, four propane bottles with their valve collars inside it and a red hazard plate on the front. The cage has no door; the bottles are solid.
AnimatedCool Box (Street Food Market and Food Trucks)
A 860 mm insulated cool box: a green body with a moulded rim, two charcoal carry handles and a white lid hinged along its back edge with a catch tab. The lid opens and closes; the box is solid inside.
Crate Stack (Street Food Market and Food Trucks)
A 1.2 m stack of four market crates, each turned a little on the one below: two timber, one red and one green, all with slatted fronts and a dark interior. Dressing for the back of a stall or the side of a truck. Static.
Water Butt (Street Food Market and Food Trucks)
A 1.28 m water butt: a green drum with three charcoal bands on a weighted base, a domed lid with a steel filler cap and a brass tap and lever near the bottom. The tap does not turn and the lid is part of the drum.
Fire Extinguisher Point (Street Food Market and Food Trucks)
A 1.6 m fire point: a red signage board on a charcoal base with a white pictogram panel and a yellow instruction strip, and two extinguishers, one water and one powder, standing in front of it with their hoses and handles. Static.
Queue Rail Section (Street Food Market and Food Trucks)
A 2 m bay of queue barrier: two posts on footplates set in from the ends, a steel top rail, a red middle rail and three infill bars. Bays butt end to end into a queue line of any length, with end ports on both ends.
Food Tray with Burger and Chips (Street Food Market and Food Trucks)
A 360 mm serving tray dressed with a meal: a red tray with a paper liner, a stacked burger of bun, patty, cheese and salad, a card carton of chips and a sauce pot. Origin on the tray base, so it sits on a counter or a picnic table. Static.
Pizza on a Board (Street Food Market and Food Trucks)
A 440 mm timber pizza board with a handle, a 12 inch pizza on it cut into eight, and a wheel cutter lying beside it. The pizza is base, sauce, cheese and two toppings as stacked discs. Origin on the board base. Static.
Coffee Cup Set (Street Food Market and Food Trucks)
A 360 mm card carry tray with a raised rim and three takeaway coffee cups standing in it, tall, medium and short, each with a dark lid, a sip lug and a red, green or yellow sleeve, plus two sugar sticks. Origin on the tray base. Static.
Drinks Bottle Crate (Street Food Market and Food Trucks)
A 440 mm charcoal bottle crate with a carry bar across it and six 330 ml bottles standing in it, two each of green, yellow and red with their caps on. Origin on the crate base. Static; the bottles do not lift out.
Sauce Bottle Set (Street Food Market and Food Trucks)
A 300 mm steel caddy holding three squeeze sauce bottles, red, yellow and green, each with a shouldered neck and a white nozzle cap. The counter set every food truck keeps by the hatch. Origin on the caddy base. Static.
Napkin and Cutlery Caddy (Street Food Market and Food Trucks)
A 260 mm charcoal counter caddy with a yellow label, divided into two bays: a stack of white paper napkins in one and six wooden and dark handled cutlery pieces standing in the other. Origin on the caddy base. Static.
Fruit and Veg Crate (Street Food Market and Food Trucks)
A 580 mm slatted timber produce crate with a yellow price card on the front, filled with five apples, four carrots and two cabbages sitting proud of the rim. Origin on the crate base, so it stacks on a trestle or stands on the ground. Static.
AnimatedCake Stand with Dome (Street Food Market and Food Trucks)
A 580 mm cake stand: a timber plate on a steel column and a weighted base, an iced cake on it cut into sixteen with berries round the rim, and a glass dome with a timber knob hinged along its back edge. The dome opens and closes as one rigid node.
AnimatedTill and Card Reader (Street Food Market and Food Trucks)
A 340 mm counter till with a raked screen, a nine key pad with one green key and a cash drawer front that slides out, plus a card reader on its own stand beside it. Origin on the till base. Only the drawer moves; the screen and the reader are solid.
Street Food Market Yard at Trading Hours (Street Food Market and Food Trucks)
A 24 x 28 m closed street trading as a street food market, laid in one continuous paved surface with a cobbled strip under the trucks. Seven stalls run down the west side, a gazebo, two trestles, a grill, a wok and crepe station and a bar, with a dressed bare frame on a run...
Similar packs
91 modelsLong-Haul Trucking and Truck Stop
Original tractor units, semitrailers, rigid trucks and truck-stop facilities.
AI used in 91 of 91 files · Claude Fable 5.1
70 modelsStorybook Christmas Market
64 detailed stylized Christmas models and six assembled scenes: snowy architecture, festive street furniture, ornaments, food and heirloom toys.
AI used in 70 of 70 files · Claude Fable 5.1
91 modelsPixel Modern City Street
Ninety pixel art city street models: a 4 m road and pavement grid, a 4 m facade kit that closes into real blocks, cars, a bus and bikes with working wheels and doors, twenty pieces of street furniture, a park corner and twelve people.
AI used in 91 of 91 files · Claude Fable 5.1
47 modelsSkate Park and Street Sports
46 stylized skate park models: modular concrete ramps, bowl walls and coping, stairs and rails, boards, a BMX and a scooter with rolling wheels, safety gear, fencing, a graffiti wall and park furniture, in one assembled park.
AI used in 47 of 47 files · Claude Opus 5
47 modelsTrading Post and Barter Market
A post-apocalyptic trading post: barter counters, exchange windows and market stalls, scales and weights, display cases, strongboxes, lockers, notice boards and market signage.
AI used in 47 of 47 files · Claude Fable 5.1
70 modelsHalloween Slasher Street
A dead end 1980s suburban street on Halloween night: a modular clapboard house kit, yard and street furniture, carved pumpkins and graveyard dressing, and the props a slasher film leaves behind.
AI used in 70 of 70 files · Claude Fable 5.1
52 modelsZombie Quarantine Streets
Zombie outbreak streets: fractured and breached walls, blown storefronts, checkpoint gates and guard booths, jersey barriers, sandbags and barricades, triage and field kitchen props, rubble and wrecked cars.
AI used in 52 of 52 files · Claude Fable 5.1
62 modelsSurvival Food and Preservation
Rations, cured provisions, smokers, drying racks and preservation vessels for survival kitchens and food stores.
AI used in 62 of 62 files · Claude Fable 5.1
69 modelsMotorcycle Racing and Street Bikes
Original race and street motorcycles with riding gear, paddock equipment, showroom fixtures and safety furniture.
AI used in 69 of 69 files · Claude Fable 5.1
149 modelsFood, Fresh Produce and Groceries
140 original food and grocery models: fruit and vegetables built as real bodies, cut and halved forms, the chilled counter, bakery, dry goods, tins and drinks, with the crates and bags that hold them.
AI used in 149 of 149 files · Claude Fable 5.1