3DAssets.dev

Loading model

About

Everything needed to build a rented allotment site rather than a garden. The ground tiles on a 4 m and 2 m grid with real connector ports: dug earth plots, mown grass paths, wood chip walks, timber raised beds that lay end to end, closeboard and chain link fence bays and a mixed boundary hedge. The plot itself carries planted and raked raised beds, a bean wigwam, a row cloche, a cold frame, a slatted compost bin and the plastic dalek beside it, a leaf mould cage, a netted brassica cage, a rhubarb forcer, a potato sack, a strawed strawberry bed and numbered marker posts. Structures are a homemade timber shed in tidy and patched condition, a lean to and a timber framed greenhouse, a water butt on a stand, the site standpipe, a pallet bench, a deckchair, a tool rack, a wheelbarrow, a fork and spade left in the earth, a hoe and rake, two watering cans, a hose reel, a bonfire ring and a chicken coop with a run. The community end adds the padlocked site gate, a hand painted noticeboard, the communal tool store, a picnic table, an honesty box stall, orchard trees, a beehive, a bird scarer, crate and pot stacks, a tyre planter and an old bath used as a trough. Clips are rigid node transforms only: the shed, greenhouse and store doors open and close, the site gate swings, the cold frame light and both compost lids lift, the coop hatch lifts out, the barrow wheel rolls, the hose reel spins and the bird scarer turns. Netting, bean canes, plants, straw, hose and taps are modelled solid and stated as static, because each needs a joint per element, a flexible surface or a fluid that a rigid node cannot give. Original AI-generated CC0 geometry, prepared for human review. No physics, gameplay, colliders, navigation or embedded lights.

Files load directly from the CDN. Choose the pieces you need. Colliders, navigation and gameplay scripts are supplied by your game.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the pack.

Use the “Allotments and Community Garden” pack in my project.

Manifest (JSON, every model with its CDN URL): https://3dassets.dev/api/v1/packs/allotments-and-community-garden
Starter scene (one GLB with every piece placed): https://cdn.3dassets.dev/assets/35180/v1/model.glb
Pack page: https://3dassets.dev/packs/allotments-and-community-garden
Description: 50 stylized allotment models: modular plot, path, bed, fence and hedge pieces, homemade sheds, two greenhouses, water butts, compost bins, cloches, cages, tools, a chicken coop, a communal tool store and a gate, in one assembled four plot site.

- 51 GLB models, 2.6 MB in total
- Units: metres, +Y up, shared scale and palette across the pack
- Licence: CC0 1.0 Universal (no attribution required)
- Loading: three.js GLTFLoader; no additional decoders required. Load models individually from the manifest, or the starter scene as one file.

Also available as a JSON manifest or via the MCP server.

Common questions

How do I use Allotments and Community Garden with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the pack and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Download the starter scene with the button to get every piece already placed as one .glb, or take individual models from the grid below, each with its own download and CDN URL. The JSON manifest linked above lists every file with its URL and size, which is what an AI agent uses to pull the pack into a project. Connect your agent to the MCP server and it can do all of that by itself.

MCP server setupAPI reference

Which game engines and tools can I use Allotments and Community Garden with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. Every model in the pack is a self-contained binary glTF (.glb) with textures embedded, and so is the starter scene, so each is one file to import and no plugin, converter or decoder to install first.
How do I import this pack into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use Allotments and Community Garden in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every pack on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The starter scene, one .glb with every piece placed, has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I have to download the whole pack?
No. Every model in the pack is a separate published asset with its own download and CDN URL, so you can take one prop or the entire set. The starter scene is the one-file option for people who want everything placed at once.
Do the models in Allotments and Community Garden fit together?
That is the point of a pack. The members are built together to one real-world scale with consistent pivots and a shared palette and level of detail, so a building, a vehicle and a prop from the same pack sit correctly in one scene without rescaling or re-texturing.

Game kit

Allotments and Community Garden

50 stylized allotment models: modular plot, path, bed, fence and hedge pieces, homemade sheds, two greenhouses, water butts, compost bins, cloches, cages, tools, a chicken coop, a communal tool store and a gate, in one assembled four plot site.

Download pack · 1.0 MB

One GLB with every piece placed in a starter scene. Each model is also below on its own.

View demo

Everything in this pack

Dug Earth Plot Tile (Allotments and Community Garden)

Dug Earth Plot Tile (Allotments and Community Garden)

A 4 m square of dug allotment earth, 10 cm deep, ridged into five furrows with a few turned clods on top. Four of them make a standard eight metre plot. Edge ports on all four sides.

@3dassets108 tris
Grass Path Tile (Allotments and Community Garden)

Grass Path Tile (Allotments and Community Garden)

A 2 m square of mown grass path between plots, 7.000000000000001 cm proud of the soil, with tufts left where the mower missed. Edge ports on all four sides.

@3dassets60 tris
Wood Chip Path Tile (Allotments and Community Garden)

Wood Chip Path Tile (Allotments and Community Garden)

A 2 m square of wood chip path, a shallow scraped bed topped with chippings laid at every angle, for the walk between beds. Edge ports on all four sides.

@3dassets276 tris
Raised Bed, Planted (Allotments and Community Garden)

Raised Bed, Planted (Allotments and Community Garden)

A 2.4 x 1.2 m timber raised bed 34 cm high on four corner posts, filled with soil and planted with three rows of leaf crops. Run ports on both ends, so beds lay end to end down a plot.

@3dassets360 tris
Raised Bed, Empty and Raked (Allotments and Community Garden)

Raised Bed, Empty and Raked (Allotments and Community Garden)

The same bed emptied and raked level for sowing, with the drill lines still in the surface. The soil fill is a solid block, not a digging volume.

@3dassets156 tris
Plot Boundary Marker Post (Allotments and Community Garden)

Plot Boundary Marker Post (Allotments and Community Garden)

A 0.82 m timber corner post with a hand painted plate on it carrying the plot number, driven in where one tenancy meets the next. The number is painted geometry, not a texture, so it reads at any distance.

@3dassets48 tris
Cane Wigwam with Climbing Beans (Allotments and Community Garden)

Cane Wigwam with Climbing Beans (Allotments and Community Garden)

A 2.05 m wigwam of six bamboo canes on a 1 m circle, tied at the head with twine and grown up with climbing beans. Canes and foliage are one static solid: a cane cannot be honestly driven by a rigid node transform.

@3dassets408 tris
Row Cloche (Allotments and Community Garden)

Row Cloche (Allotments and Community Garden)

A 2 m glazed barrel cloche over a sown row, 0.34 m to the crown, held down by three galvanised hoops. The ends are open and the glazing is solid geometry; nothing lifts.

@3dassets488 tris
Cold Frame (Allotments and Community Garden)Animated

Cold Frame (Allotments and Community Garden)

A 1.3 x 0.86 m timber cold frame, 0.52 m at the back falling to 0.3 m at the front, sown with two short rows and closed by a single glazed light. The light is one node hinged on the back board, so the clip lifts it and drops it back.

@3dassets192 tris
Slatted Timber Compost Bin (Allotments and Community Garden)Animated

Slatted Timber Compost Bin (Allotments and Community Garden)

A 1 m square timber compost bin 0.86 m high, four corner posts with slatted sides and a heap of half rotted material in it, closed by a hinged board lid. The lid is one node on the back edge; the slats are fixed.

@3dassets360 tris
Plastic Dalek Compost Bin (Allotments and Community Garden)Animated

Plastic Dalek Compost Bin (Allotments and Community Garden)

The council issue plastic compost bin: a 0.94 m tapered black cone with moulded rings, a hatch at the foot for taking compost out and a lift off lid modelled as a hinged node. The hatch is fixed geometry.

@3dassets236 tris
Leaf Mould Cage (Allotments and Community Garden)

Leaf Mould Cage (Allotments and Community Garden)

A 1.1 m square wire cage on four galvanised stakes, 1 m high, filled with autumn leaves left to rot down. The netting is modelled as rigid wire; it does not sag or move.

@3dassets784 tris
Netted Brassica Cage (Allotments and Community Garden)

Netted Brassica Cage (Allotments and Community Garden)

A 1.8 x 1.2 m timber cage 1.05 m high over a bed of brassicas, netted on all four sides and across the top against pigeons. The net is rigid geometry on the frame: it neither sags nor opens.

@3dassets1.7k tris
Rhubarb Forcer (Allotments and Community Garden)

Rhubarb Forcer (Allotments and Community Garden)

A 0.84 m terracotta forcer with a knobbed cap, stood over a rhubarb crown with two more crowns in leaf beside it. The cap is modelled in place and does not lift.

@3dassets200 tris
Potato Sack Planter (Allotments and Community Garden)

Potato Sack Planter (Allotments and Community Garden)

A hessian potato sack rolled down at the rim, 0.52 m tall, filled with earth and growing a haulm of potato leaf. The sack is a rigid solid; it does not slump or unroll.

@3dassets310 tris
Strawberry Bed with Straw (Allotments and Community Garden)

Strawberry Bed with Straw (Allotments and Community Garden)

A 1.7 x 1.1 m low edged strawberry bed, strawed under the plants with six crowns in fruit. Straw and fruit are solid geometry; nothing is pickable.

@3dassets1.3k tris
Homemade Allotment Shed (Allotments and Community Garden)Animated

Homemade Allotment Shed (Allotments and Community Garden)

A 2 x 1.6 m homemade timber shed on bearers, 2.05 m at the front falling to 1.72 m at the back under a felt pent roof, with a painted door, a glazed window and a trodden earth step. The door is one node on its hinge stile, so the clip swings it open and shut.

@3dassets228 tris
Allotment Shed, Patched and Weathered (Allotments and Community Garden)Animated

Allotment Shed, Patched and Weathered (Allotments and Community Garden)

The same shed after a few hard winters: corrugated sheet nailed over the rotted boards, a patch on the felt, moss growing on the roof, a plank propped against the corner and the paint gone from the door. The door still opens; the propped plank and the patches are fixed.

@3dassets296 tris
Lean To Greenhouse (Allotments and Community Garden)

Lean To Greenhouse (Allotments and Community Garden)

A 2.2 m lean to greenhouse built against a 2.15 m back wall, its glazing falling to 1.15 m at the front in four timber framed lights, with staging of pots and seed trays along the back. It has no door and nothing on it moves; the glazing is solid geometry.

@3dassets756 tris
Timber Framed Greenhouse (Allotments and Community Garden)Animated

Timber Framed Greenhouse (Allotments and Community Garden)

A 2 x 2.6 m cedar framed greenhouse, 1.5 m to the eaves and 2.26 m to the ridge, glazed all round and over, with staging and pots inside and a side hung door. The door is the only moving part; the roof vents are fixed lights.

@3dassets408 tris
Water Butt on a Stand (Allotments and Community Garden)

Water Butt on a Stand (Allotments and Community Garden)

A 1.6 m green plastic water butt on a timber stand, tapped at the foot with the bucket height a can needs, and fed by a galvanised downpipe swanning over into the lid. The tap and the downpipe are fixed: there is no water volume and no flow.

@3dassets376 tris
Standpipe and Tap on a Post (Allotments and Community Garden)

Standpipe and Tap on a Post (Allotments and Community Garden)

The site standpipe: a galvanised riser strapped to a timber post on a concrete pad, 1.2 m to a brass tap with a drip tray and a bucket under it. Nothing turns; the tap head is modelled in one piece.

@3dassets160 tris
Pallet Bench (Allotments and Community Garden)

Pallet Bench (Allotments and Community Garden)

A bench knocked together from two pallets with a third stood up behind for a back, 1.2 m wide with a cushion on the seat. The pallets are one static solid.

@3dassets288 tris
Striped Deckchair (Allotments and Community Garden)

Striped Deckchair (Allotments and Community Garden)

A folding timber deckchair set up on the plot, 0.86 m to the head of the frame with a striped canvas sling. It is modelled in the open position: the frame is one solid and does not fold.

@3dassets184 tris
Tool Rack (Allotments and Community Garden)

Tool Rack (Allotments and Community Garden)

A 1.14 m boarded tool rack that leans against a shed wall, with four hooks, a hand fork, a trowel, a ball of twine and a seed box on it. The hung tools are part of the rack and do not come off.

@3dassets326 tris
Wheelbarrow (Allotments and Community Garden)Animated

Wheelbarrow (Allotments and Community Garden)

A galvanised builders barrow with timber handles, a stub axle and two leg stands, 1.5 m over the handles. The wheel is one node on the axle, so the clip rolls it; the barrow itself does not tip.

@3dassets312 tris
Garden Fork and Spade in the Earth (Allotments and Community Garden)

Garden Fork and Spade in the Earth (Allotments and Community Garden)

A digging spade and a four tine fork left standing in a heap of turned earth, both 1.15 m to the top of the D handle, with a real blade, tread and shoulder. Static: the tools and the heap are one model.

@3dassets316 tris
Hoe and Rake (Allotments and Community Garden)

Hoe and Rake (Allotments and Community Garden)

A draw hoe and a seven tine soil rake stood head down in the earth with their 1.5 m ash handles crossing. The heads carry real blades and tines; the pair is one static model.

@3dassets200 tris
Watering Can, Ten Litre (Allotments and Community Garden)

Watering Can, Ten Litre (Allotments and Community Garden)

A galvanised ten litre watering can, 0.42 m to the handle, with a real rose on the end of the spout and a grip at the back. The rose is fixed to the spout and does not come off.

@3dassets280 tris
Watering Can, Five Litre (Allotments and Community Garden)

Watering Can, Five Litre (Allotments and Community Garden)

The same can at two thirds the size, for seedlings and for a child to carry. The rose, spout and both handles are modelled; nothing moves.

@3dassets280 tris
Hose Reel on a Post (Allotments and Community Garden)Animated

Hose Reel on a Post (Allotments and Community Garden)

A hose reel on a galvanised bracket bolted to a 0.94 m post, wound with 0.22 m coils and a crank on the side, with the free end run off across the ground. The reel is one node on its axle so the clip spins it; the hose itself is a rigid solid and does not pay out.

@3dassets524 tris
Bonfire Ring (Allotments and Community Garden)

Bonfire Ring (Allotments and Community Garden)

A 1.4 m ring of reclaimed bricks round a bed of ash, with half burnt prunings stacked in the middle and a pile of green waste beside it. Nothing burns: there is no fire, smoke or light in the model.

@3dassets392 tris
Chicken Coop with Run (Allotments and Community Garden)Animated

Chicken Coop with Run (Allotments and Community Garden)

A raised timber coop 1.16 m across on 0.42 m legs with a felt gable roof, a pop hole and ramp, and a 1.7 x 1.1 m netted run on the end. The nest box hatch is one node hinged on its head; the netting, ramp and pop hole are fixed.

@3dassets840 tris
Site Gate with Padlock (Allotments and Community Garden)Animated

Site Gate with Padlock (Allotments and Community Garden)

A 2 m allotment site gate: a four rail braced timber leaf hung between two 1.46 m capped posts, with a hasp and a padlock on the closing stile. The leaf is one node on its hinge post, so the clip swings it; the padlock is modelled shut and does not open.

@3dassets172 tris
Timber Fence Panel (Allotments and Community Garden)

Timber Fence Panel (Allotments and Community Garden)

A 2 m closeboard fence bay 1.15 m high: two posts, a gravel board, two arris rails and eleven feather edge boards. Run ports on both ends, so bays make a boundary of any length.

@3dassets192 tris
Chain Link Fence Panel (Allotments and Community Garden)

Chain Link Fence Panel (Allotments and Community Garden)

A 2 m galvanised chain link bay 1.15 m high on two posts with top and bottom straining wires and a raking stay. The mesh is rigid geometry and does not sag. Run ports on both ends.

@3dassets380 tris
Hedgerow Section (Allotments and Community Garden)

Hedgerow Section (Allotments and Community Garden)

A 2 m run of mixed boundary hedge 1.5 m high on woody stems, with rough grass at the foot and berries in it. Run ports on both ends, so sections make a boundary of any length.

@3dassets636 tris
Orchard Apple Tree (Allotments and Community Garden)

Orchard Apple Tree (Allotments and Community Garden)

A 3.4 m allotment apple tree on a 1.5 m trunk with three low limbs, a broad crown and fruit on it, standing in rough grass. The crown is solid foliage: there is no leaf card, wind or sway.

@3dassets516 tris
Hand Painted Site Noticeboard (Allotments and Community Garden)

Hand Painted Site Noticeboard (Allotments and Community Garden)

A 1.8 m hand painted allotment noticeboard on two posts under a little pitched hood, with the site name lettered across the head and four notices pinned to it. The notices are painted geometry and cannot be changed at runtime.

@3dassets180 tris
Communal Tool Store (Allotments and Community Garden)Animated

Communal Tool Store (Allotments and Community Garden)

The site's shared store: a 3 x 2 m timber building 2.3 m at the front under a corrugated pent roof, with a wide braced door and a padlock. The door is one node on its hinge stile; the roof sheets and the padlock are fixed.

@3dassets300 tris
Picnic Table (Allotments and Community Garden)

Picnic Table (Allotments and Community Garden)

A 1.8 m timber picnic table with benches on both sides, 0.74 m to the table top on crossed A-frame legs. One static solid; the benches are part of the frame.

@3dassets212 tris
Honesty Box Stall (Allotments and Community Garden)

Honesty Box Stall (Allotments and Community Garden)

A 1.3 m trestle stall of surplus produce by the gate, with two crates of greens, a painted price card and a locked honesty box with a coin slot. The box is a solid model: it does not open and holds nothing.

@3dassets420 tris
National Beehive (Allotments and Community Garden)

National Beehive (Allotments and Community Garden)

A 1.4 m national beehive on a timber stand: a floor, three brood and super boxes with handholds, a crown board and a galvanised roof, with the entrance block at the front. The boxes are modelled as one static stack; nothing lifts off and there are no bees.

@3dassets276 tris
Bird Scarer on a Pole (Allotments and Community Garden)Animated

Bird Scarer on a Pole (Allotments and Community Garden)

A 1.9 m pole with four arms of old discs and cut plastic streamers on the head, turned by the wind over a sown bed. The head is one node on the pole, so the clip spins the whole spider; the streamers do not flutter on their own.

@3dassets304 tris
Plastic Crate Stack (Allotments and Community Garden)

Plastic Crate Stack (Allotments and Community Garden)

Three stacked ventilated produce crates, just over a metre to the top of the pile and set down slightly out of square. The crates are one solid: they do not come apart or nest.

@3dassets900 tris
Plastic Crate Stack, Blue (Allotments and Community Garden)

Plastic Crate Stack, Blue (Allotments and Community Garden)

The same stack of three crates in pale blue, for mixing colours across a plot. The geometry is unchanged.

@3dassets900 tris
Upturned Pot Stack (Allotments and Community Garden)

Upturned Pot Stack (Allotments and Community Garden)

Four terracotta pots stacked upside down to keep the rain out, 0.63 m high, with two more stood beside them in the grass. One static solid; the pots do not separate.

@3dassets340 tris
Tyre Planter (Allotments and Community Garden)

Tyre Planter (Allotments and Community Garden)

An old tyre filled with earth and planted up with flowers, 0.55 m across, with a second tyre lying beside it waiting for a use. The tyres are rigid solids with no tread flex.

@3dassets658 tris
Old Bath Used as a Trough (Allotments and Community Garden)

Old Bath Used as a Trough (Allotments and Community Garden)

A 1.5 m enamelled bath stood on four brick piers and planted up as a trough, 0.46 m to the rolled rim with the old tap hole still in the end. The bath is a rigid shell; there is no water and nothing drains.

@3dassets904 tris
Green Deckchair (Allotments and Community Garden)

Green Deckchair (Allotments and Community Garden)

The same deckchair in green canvas, so a row of them is not all one colour. The geometry is unchanged.

@3dassets184 tris
Four Plot Allotment Site (Allotments and Community Garden)

Four Plot Allotment Site (Allotments and Community Garden)

A 20 x 24 m allotment site of four rented plots on dug earth, divided by a mown grass main path and a wood chip side path. One plot is kept neat with raised beds, a cloche, a cold frame and a painted shed; one is run down, with a patched shed, a bath used as a trough, compost...

@3dassets20.4k tris

Similar packs

Almanac Gardens: Country Garden Seasons assembled scene96 models

Almanac Gardens: Country Garden Seasons

A crafted countryside garden through all four seasons: detailed architecture, botanical models and seasonal activities.

AI used in 96 of 96 files · Claude Fable 5.1

15.6 MB totalStarter scene includedCC0 1.0 Universal
Lawn Mowing Simulator Kit assembled scene87 models

Lawn Mowing Simulator Kit

A comedy lawn mowing game kit: ten mowers from a rusty push reel to a four deck mega mower, twelve garden characters, bolt on upgrades, gardening tools, and a modular back garden of lawn tiles, fences, hedges, a shed and a greenhouse.

AI used in 87 of 87 files · Claude Fable 5.1

5.5 MB totalStarter scene includedCC0 1.0 Universal
City Park and Playground assembled scene41 models

City Park and Playground

40 stylized city park models: modular path, lawn, safety surfacing and fencing, swings, a slide, a play tower, a climbing frame, monkey bars, a roundabout, a seesaw, spring rockers, a bandstand, a kiosk, benches, lamps, trees and a duck pond, in one assembled park corner.

AI used in 41 of 41 files · Claude Opus 5

1.5 MB totalStarter scene includedCC0 1.0 Universal
Turning Seasons: Four Season Garden assembled scene36 models

Turning Seasons: Four Season Garden

Four seasons of a storybook garden: blossom, sunshine, harvest and snow.

AI used in 36 of 36 files · GPT-6 via Codex

1.1 MB totalStarter scene includedCC0 1.0 Universal
Modular Survival Base Builder assembled scene182 models

Modular Survival Base Builder

A 180-piece modular base builder: foundations, floors, walls with doors and windows, roofs, stairs and ramps in timber, log, wattle, corrugated and rubble finishes, all snapping to one grid.

AI used in 182 of 182 files · Claude Fable 5.1

9.9 MB totalStarter scene includedCC0 1.0 Universal
Modular Spaceships and Space Fleet assembled scene80 models

Modular Spaceships and Space Fleet

Original socketed hulls with modular equipment, station structures, utility craft and debris.

AI used in 80 of 80 files · Claude Fable 5.1

10.7 MB totalStarter scene includedCC0 1.0 Universal
Enchanted Harp Garden and Music Sanctuary assembled scene51 models

Enchanted Harp Garden and Music Sanctuary

Fifty original music sanctuary designs with detailed string instruments, percussion puzzles and a complete roofed garden arcade.

AI used in 51 of 51 files · GPT-6

10.1 MB totalStarter scene includedCC0 1.0 Universal
Public Library and Reading Garden assembled scene51 models

Public Library and Reading Garden

Fifty premium library circulation, stocked stack, reading and garden assets in a compact furnished public library.

AI used in 51 of 51 files · GPT-6

9.1 MB totalStarter scene includedCC0 1.0 Universal
Fencing Club and Tournament Piste assembled scene51 models

Fencing Club and Tournament Piste

Fifty specialist fencing, electrical scoring and weapon maintenance designs in a furnished two-piste club.

AI used in 51 of 51 files · GPT-6

7.4 MB totalStarter scene includedCC0 1.0 Universal
Water Clock Garden and Hydraulic Puzzles assembled scene51 models

Water Clock Garden and Hydraulic Puzzles

Fifty premium limestone and bronze hydraulic puzzle designs with three distinct timing mechanisms and a connected garden canal.

AI used in 51 of 51 files · GPT-6

9.1 MB totalStarter scene includedCC0 1.0 Universal