Loading scene
Walkable demo
Bazaar Street and Street Shrine
Walk a stocked bazaar street: two rows of stalls under one awning line, shuttered shopfronts with balconies above, a side lane at the corner, traffic on the road and a walled street shrine closing the far end.
About
A trading street laid out from 61 of the pack's models, 371 placements in all.
The walk
You start at the north end of the carriageway, on the centre line, looking straight down the road at the shrine tower forty metres away. Both pavements are stall rows: produce, spices, cloth, tea, sweets and garlands at a four metre pitch under one continuous awning line, each stall dressed with its own crates, open sacks, tin trunks, water pots, stools and pot plants. Behind them the ground floor is modular shopfront bays, some open for trade and some shut behind roll shutters, with jali screen balconies stacked above and water tanks, dishes and cable bundles on the roofs and walls above those.
Halfway down, a corner building block turns the street into a side lane running east, with two more stall pairs under their own awnings, a hoarding frame, a gated compound wall and a second block closing the far end. Traffic stands in both: an auto rickshaw, handcarts, a vending barrow, bicycles, scooters and a parked motorcycle by the shrine, and a second cluster around the junction. Cable spans run the length of the street off transformer poles, and bunting is strung over both pavements.
The south end is a walled precinct entered between two gated walls. A stepped tower stands behind an open pillared porch, with an offering tray and lamp rows on the paving in front of it, a bell on a frame either side, a flagpole, lamp columns, tulsi planters and a carved stone on a plinth. Arched colonnades line the side walls, a stepped tank edge drops to the water on the east, and a tap, a trough and water pots stand against the west wall. The shrine is generic street architecture and furnishing: nothing here names or depicts any particular place or figure.
What moves
The roll shutters roll up, the compound gates swing, the temple bells swing on their frames, the rickshaw, handcart, barrow, bicycle, scooter and motorcycle wheels roll, the sweet counter and tin trunk lids open, the weighing scale pans rock and the public tap handle turns. Clips play as you come within a few metres.
What does not move, and why
Garlands, cloth bolts, awning fabric, overhead cables, bunting, drying laundry and water are static. Flexible material needs a joint per element, which the one rigid node transform per moving part that this catalogue uses cannot give. There are no people and no animals anywhere in the scene: the pack has no skinned meshes.
Nothing on any sign, shutter, hoarding or wall carries lettering in any script, and no real business, marque or product appears anywhere.
Download
61 distinct models are fetched once each and cloned into 371 placements, so the page downloads the pack rather than the scene.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
Trading hours
Both pavements run as stall rows under one awning line: produce, spices, cloth, tea, sweets and garlands, each dressed with its own crates, sacks, pots and stools. Walk south and the street stays stocked the whole way.
Fruit and Vegetable Stall (Indian Bazaar Street and Temple)Shutters and shopfronts
The ground floor is modular bays, open for trade or closed behind a roll shutter that rolls up as you come near. Balcony bays with jali screens stack above them, water tanks and dishes on the roofs above those.
Shopfront Bay with Roll Shutter (Indian Bazaar Street and Temple)The corner
A corner building block turns the street into a side lane with two more stall pairs, a hoarding frame and a gated wall closing the far end, so the walk is not one straight canyon.
Corner Building Block (Indian Bazaar Street and Temple)Traffic on the road
Auto rickshaws, handcarts, a vending barrow, bicycles, scooters and a parked motorcycle stand in the carriageway. Their wheels roll as you approach.
Auto Rickshaw (Indian Bazaar Street and Temple)The street shrine
A walled precinct closes the street: a stepped tower behind an open pillared porch, an offering tray and lamp rows on the paving, a bell on a frame either side, a flagpole and lamp columns. The bells swing as you pass.
Street Shrine with Stepped Tower (Indian Bazaar Street and Temple)The step tank
Stepped edges drop to the water on the east of the precinct, with pots set down beside them and a tap and trough against the far wall.
Step Tank Edge (Indian Bazaar Street and Temple)Poles and spans
Cable spans run the length of the street off transformer poles, meter boxes and bundles climb the shop walls, and bunting is strung over both pavements.
Overhead Cable Span (Indian Bazaar Street and Temple)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Bazaar Street and Street Shrine" demo scene from the Indian Bazaar Street and Temple pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/indian-bazaar-street-and-temple Pack manifest: https://3dassets.dev/api/v1/packs/indian-bazaar-street-and-temple Demo page: https://3dassets.dev/demos/indian-bazaar-street-and-temple - 371 placements of 61 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (0, 0.13, 27) facing 180 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Common questions
How do I use Bazaar Street and Street Shrine with my AI development tools?
How do I get started?
Which game engines and tools can I use Bazaar Street and Street Shrine with?
How do I import this scene into Unity, Godot, Unreal or Blender?
Can I use Bazaar Street and Street Shrine in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Is the demo itself a file I can download?
Can I change the scene, or add gameplay to it?
Models in this demo
Street Road Module (Indian Bazaar Street and Temple)
A 4 x 4 m tarmac road tile: a 120 mm charcoal slab with a broken centre line down it and two paler patches of repair. Four edge ports, so tiles butt into a carriageway of any length or width.
Pavement Module (Indian Bazaar Street and Temple)
A 4 m length of raised footway: a 140 mm kerb along the road edge, a stone footway behind it and six flagstones laid on top so the joints read. 2.4 m deep, and the shop plinth sits against the back edge. End ports at both ends.
Pavement Drain Module (Indian Bazaar Street and Temple)
The same 4 m footway with a road gully in it: a recess at the kerb line holding a seven bar iron grate in a frame, and the flagstones set back behind it. Same kerb height and the same end ports as the plain pavement, so it drops into a run anywhere.
Arched Colonnade Bay (Indian Bazaar Street and Temple)
A 4 m bay of covered arcade: two pairs of plaster piers on a stone plinth, a nine voussoir arch turned across each face at 2.1 m springing and a stone roof slab with a projecting cornice over. 2.6 m deep, 3.6 m tall. End ports, so bays butt into a colonnade.
Shopfront Bay Open for Trade (Indian Bazaar Street and Temple)
The same 4 m shop bay trading: the roll shutter is already wound up into the fascia behind the canopy and the 2.9 x 2 m opening is clear, so the counter and the back shelves are in view from the street. The shutter is held open here and does not animate.
Balcony Bay with Jali Screen (Indian Bazaar Street and Temple)
The storey over a shop: a saffron painted front with a pierced jali screen in a 2.1 m opening, a stone balcony on two brackets with a turned teal balustrade, a drying rail with two cloths on it and a parapet round the flat roof. Sits on a shopfront bay at 3.9 m.
AnimatedShopfront Bay with Roll Shutter (Indian Bazaar Street and Temple)
A 4 m shop bay closed for the night: a stone plinth, plaster walls, a 2.9 m opening under a steel roll shutter, a crimson canopy on stay rods and a blank painted sign board over it. A timber counter and a three shelf back fitting stand inside. Bays butt along X.
External Staircase (Indian Bazaar Street and Temple)
The stair that reaches the roof from the yard: fourteen stone treads at 185 mm rise on a plaster stringer wall, a landing slab at the top and a steel tube handrail on eight standards. 1.4 x 3.8 m in plan, 3.8 m to the landing. Static.
Rooftop Water Tank on Frame (Indian Bazaar Street and Temple)
The tank on every flat roof on the street: a 1.16 m black plastic cylinder with a lid boss, sitting in a timber cradle on a braced steel angle frame 1.6 m high with padded feet, and a down pipe running off the side. 1.64 m across overall.
Satellite Dish (Indian Bazaar Street and Temple)
A 660 mm offset dish on a wall bracket: a backing plate, a tilted dish on a short mast, a feed arm and head, and a cable running down off the bracket. 0.66 x 0.62 x 0.86 m, origin at the wall plate so it mounts at any height. Static.
Wall Cable Bundle and Meter Boxes (Indian Bazaar Street and Temple)
The servicing on a shop wall: a steel meter cabinet and a teal junction box, nine cables running up the plaster in three straps, and a coil of slack hung on a hook beside them. 1.4 x 1.8 m of wall, 210 mm proud. Hangs on any flat frontage. Static.
Corner Building Block (Indian Bazaar Street and Temple)
A two storey corner plot, 5 x 5 m and 7.4 m tall: plaster over a stone plinth with the street corner chamfered off, a shuttered shop on each face, a teal entrance door on the chamfer with a balcony over it, jali screened upper windows and a parapet round the roof.
Blank Hoarding Frame (Indian Bazaar Street and Temple)
A 4 m roadside hoarding with nothing on it: two braced steel posts, a framed board 4 x 1.8 m carrying a blank painted panel with two abstract colour bands, and diagonal bracing behind. 3.4 m to the top. No text, logo or image; paint your own on the panel.
AnimatedCompound Wall with Gate (Indian Bazaar Street and Temple)
The wall round a yard or a shrine: 4.6 m of plaster wall on a 2.2 m gateway, piers with stone caps and finials, a coping course, a saffron painted panel each side and two barred teal gate leaves hinged on the inner piers. 2.9 m to the finials. The leaves swing.
Painted Plaster Wall Run (Indian Bazaar Street and Temple)
A 4 m run of street wall: a stone plinth, a plaster face 3.1 m high, a saffron painted skirt and a teal panel on both sides and a stone coping over the top. No lettering anywhere on it. End ports, so runs butt into a frontage of any length.
Stone Paving Module (Indian Bazaar Street and Temple)
A 4 x 4 m stone paved yard tile, laid to the same 240 mm datum as the footway: a bed with sixteen flags on it in two greys so the joints read. Four edge ports, for a temple forecourt, a compound yard or a widened pavement.
Carved Tier Band (Indian Bazaar Street and Temple)
A 2 m course of shrine carving to run round a tower or a wall head: a moulded stone base, four framed saffron panels on each face, a dentil band of eight blocks and a projecting coping. 920 mm tall, 620 mm deep, with end ports so courses butt into a run of any length.
Stepped Doorway (Indian Bazaar Street and Temple)
A house door off the street: three stone steps up to a 1.4 m opening in a plaster wall, a timber frame and reveal, two teal leaves with painted panels and brass handles, a saffron head band and a stone coping. 2.6 m wide, 3.3 m tall. The leaves are shut and static.
Street Shrine with Stepped Tower (Indian Bazaar Street and Temple)
A small street shrine, 3.7 m square at the plinth and 7.5 m tall: a two course plinth, a sanctum with a saffron framed doorway, and a stepped tower of five receding tiers with moulded bands, corner blocks and a brass finial. An empty stone pedestal stands inside.
Pillared Porch (Indian Bazaar Street and Temple)
The open porch a shrine is entered through: a 3.4 m square stone platform in two courses, four turned columns with painted bands, beams both ways over them and a flat roof with a projecting cornice and a low parapet. 3.64 m to the coping, open on all four sides.
Offering Tray (Indian Bazaar Street and Temple)
A 640 mm brass tray with a rolled rim, as it is left at a shrine: a small bowl, a ring of orange and red flower heads and two pinches of coloured powder on it. 170 mm tall to the flowers. Static; the loose contents are modelled as one solid with the tray.
Oil Lamp Row (Indian Bazaar Street and Temple)
Five small clay oil lamps on a stone ledge, 1.16 m long and 250 mm tall: each lamp is a shallow bowl with a rolled rim and a wick standing at the lip. No flame, no light source and no glow; the lamps are geometry only.
AnimatedTemple Bell on a Frame (Indian Bazaar Street and Temple)
A brass bell hung where it can be reached: two timber posts on stone pads, a beam across them with a brass saddle, and a 660 mm bell with a hanger and a clapper on its own pivot at the beam. 2.1 x 2.5 m overall. The bell swings; the frame is static.
Tulsi Planter (Indian Bazaar Street and Temple)
The masonry planter a tulsi plant is kept in beside a doorway: a 920 mm stone base, a plaster column with saffron painted panels, a moulded head, a terracotta basin of soil and a bushy plant in it. 1.94 m tall. Static, with the foliage modelled as clustered solids.
Carved Figure on a Plinth (Indian Bazaar Street and Temple)
A carved stone standing on a two course plinth: an abstract banded form tapering through five mouldings to a rounded head, 2.9 m tall on a 1.2 m base, with a marigold garland over it. The form is deliberately abstract and depicts nobody; nothing is named or inscribed.
Painted Shrine Niche (Indian Bazaar Street and Temple)
A shrine niche built into a street wall: a plaster panel 1.3 x 2.2 m with a saffron and red painted surround, a recessed arched opening left empty, a stone ledge under it with two clay lamps on it and a coping over. Nothing is depicted, named or lettered in the niche.
Temple Flagpole (Indian Bazaar Street and Temple)
The flagpole beside a shrine: a stepped stone base, a tapered steel shaft with a brass collar and ball at the head, and a saffron pennant with a red hem hanging from it. 6.4 m tall on a 1 m base. The pennant is modelled solid and is static.
Lamp Column (Indian Bazaar Street and Temple)
The lamp column that stands in front of a shrine: a stepped stone base, a round shaft and three tiers of eight brass lamp cups on short stone arms, capped with a moulded head and a brass ball. 4.2 m tall, 1.1 m square at the base. No light source.
Step Tank Edge (Indian Bazaar Street and Temple)
A 4 m module of the stepped edge of a water tank: five 300 mm stone courses cut back to the water, a wall and a coping behind them and a flat teal water plate at the bottom. 2.9 m across and 1.66 m tall. The water is a static plate with no shader.
Water Pot Set (Indian Bazaar Street and Temple)
Three earthenware water pots on rope rings, 520, 440 and 340 mm across, two with metal lids and a steel mug beside them. 0.92 x 0.5 x 0.8 m overall. Static; there is no water surface inside the pots.
Street Water Trough (Indian Bazaar Street and Temple)
The stone trough a street keeps filled at the kerb: a 1.9 m block with a hollowed basin, a teal water plate in it and a short standpipe at one end. 1.9 x 1.18 x 0.8 m. Static, with no animals and no water shader.
AnimatedPublic Tap (Indian Bazaar Street and Temple)
The standpipe a street draws water at: a paved apron with a drain grate, a plaster post with a stone cap and a saffron head, a brass bib tap with a three spoke handle, and a pot and a can waiting under it. 1.5 x 1.57 x 1.2 m. The handle turns; there is no water.
Potted Plant Group (Indian Bazaar Street and Temple)
Three planted pots kept beside a door: two terracotta and one painted, 320 to 520 mm across with soil discs and bushy foliage over them. 0.96 x 0.9 x 0.86 m overall. Static, with the foliage modelled as clustered solids.
Plastic Stool (Indian Bazaar Street and Temple)
The moulded plastic stool every tea stall keeps a stack of: a 340 mm round seat with a rolled rim on four splayed legs with a tie ring, 430 mm tall. Static, and sized to the tea stall counter and the charpoy.
Plastic Stool Blue (Indian Bazaar Street and Temple)
The same moulded plastic stool in blue: a 340 mm round seat with a rolled rim on four splayed legs with a tie ring, 430 mm tall. Geometry is identical to the red stool; only the material differs.
Charpoy String Cot (Indian Bazaar Street and Temple)
The string cot kept outside every shop: four turned timber legs, a pegged frame 1.9 x 0.92 m and a deck of eleven cross tapes over six long ones, woven at 480 mm. The tapes are modelled as solid straps and the cot does not fold.
Street Bin (Indian Bazaar Street and Temple)
A municipal bin on the pavement: a 560 mm teal drum on a steel stand with a tipping bracket, three banding rings, a blank painted panel on the front and some rubbish showing over the rim. 0.72 x 1.04 x 0.72 m. Static, and the drum does not tip.
Flower Garland Stall (Indian Bazaar Street and Temple)
A 2 m garland pitch: a steel frame with nine flower garlands hanging from the front rail at different lengths, a timber counter under them with five baskets of loose heads on it and a big basket on the ground. 2 x 0.9 x 2.2 m. The garlands are solid and static.
Produce Crate Stack (Indian Bazaar Street and Temple)
Three slatted timber crates stacked at the back of a stall with a fourth beside them, the top two heaped with fruit. 960 x 980 x 800 mm overall. The produce is modelled as clustered solids, merged with the crates into one static model.
Open Jute Sack Group (Indian Bazaar Street and Temple)
Four jute sacks standing open the way a grain or pulse pitch keeps them: three tall sacks with rolled collars and a low one beside them, each showing a heap of goods at the mouth, with a plain coloured tag on the side. 1.3 x 0.78 x 1.2 m. Static.
AnimatedStacked Tin Trunks (Indian Bazaar Street and Temple)
Two painted metal trunks stacked at the back of a shop: a teal trunk under a crimson one, both with steel corner straps, banding and a brass hasp, and a separating tray between them. 1 x 0.92 x 0.6 m. The top lid hinges open on its back edge.
Rope and Basket Rack (Indian Bazaar Street and Temple)
The rack a cordage and basket pitch works from: a timber frame 1.7 m wide with five woven baskets hung off the front rail on handles, three pairs of coiled rope stacked under it and two more baskets on the ground. 1.7 x 0.6 x 2.1 m. Static.
Speaker Horn on a Pole (Indian Bazaar Street and Temple)
A pair of horn loudspeakers on a 3.6 m steel pole, facing opposite ways off a yoke, with drivers behind them and the feed cable taped up the pole in three straps. 1.16 m across the horns. Static and silent; there is no audio in a GLB.
Bunting Line (Indian Bazaar Street and Temple)
A 5 m line of bunting on two steel poles: a sagging wire with twelve triangular flags in five colours hanging from it at 2.6 m. The flags are flat solids and the whole line is static, because cloth needs a joint per flag that a rigid node cannot give.
Utility Pole with Transformer (Indian Bazaar Street and Temple)
The pole the whole street is wired from: a 6.8 m concrete pole with two cross arms of four insulators, a pole mounted transformer on a braced platform with cooling fins and bushings, a meter box at head height and a strapped bundle of seven service cables running up it. Static.
AnimatedWeighing Scale with Weights (Indian Bazaar Street and Temple)
A brass beam scale on a timber table: a column and fulcrum, a 940 mm beam with a pan hung on each end by four cords, a load in one pan and four graded weights standing on the table beside it. 1 x 0.7 x 1.55 m. The beam and both pans rock as one node.
Fruit and Vegetable Stall (Indian Bazaar Street and Temple)
A 2.2 m produce stall: a timber trestle with a sloped display board over it, four crates of fruit on the table, three heaps on the board, two more crates underneath and a crimson sheet awning on four steel poles at 2.25 m. The awning is static sheet.
Spice Stall with Open Sacks (Indian Bazaar Street and Temple)
A 2 m spice pitch: a timber table with six open sacks of ground spice on it, each rolled down to a cone of colour, three brass scoops lying beside them and two bigger sacks open on the ground. 2 x 1.2 m and 1.2 m tall. The sacking is modelled solid and static.
Cloth Stall with Bolt Rack (Indian Bazaar Street and Temple)
A 2.3 m cloth pitch: a timber counter with eleven folded stacks laid out on it, a steel rack behind holding seven bolts on end and three laid across at shoulder height. 2.3 x 1.1 x 2.3 m. The cloth is modelled as solid rolls and folds and is static.
Tea Stall with Kettle and Glass Rack (Indian Bazaar Street and Temple)
A 1.9 m tea pitch: a timber counter with a steel top, a two burner stove with a kettle and a pan on it, a three shelf rack of eighteen small glasses beside it and a blank painted board over the counter. 2.3 x 1.1 x 2.26 m. No flame, steam or light.
AnimatedSweet Counter with Trays (Indian Bazaar Street and Temple)
A 1.8 m sweet counter: a timber carcass with a glazed steel case on it holding six trays of sweets on two levels, a red painted band across the front of the case and a cash drawer on runners under the counter. 1.8 x 0.84 x 1.56 m. The drawer opens.
Plastic Stool Stack (Indian Bazaar Street and Temple)
Five plastic stools stacked the way they are kept between customers, each turned a little on the one below. 340 mm across and 990 mm tall. One static model; the stools are merged and do not separate.
Awning Run on Poles (Indian Bazaar Street and Temple)
A 6 m pavement awning: two steel poles on pads with props and two rails carrying a sloping saffron sheet with a scalloped valance. 3 m at the back, 2.42 m at the eaves, 1.4 m out, so a stall trades under it. Ports sit outside the poles, so a run stands on a pair.
Awning Run on Poles Crimson (Indian Bazaar Street and Temple)
The same 6 m awning span in crimson with a saffron valance, so a chained run of awnings alternates colour down a pavement. Geometry, pole position and end ports are identical to the saffron span.
Overhead Cable Span (Indian Bazaar Street and Temple)
A 6 m span of street wiring: two concrete poles with timber cross arms and insulators, three power lines and a heavier bundle slung between them with a real sag, and a service drop to a building. 5.6 m to the arms. Ports sit outside the poles, so spans chain.
AnimatedAuto Rickshaw (Indian Bazaar Street and Temple)
The three wheeler that works this street: a teal body on a 2.6 m frame with a sloped nose, a screen, a canopy roof on posts over an open cab, a bench seat and a driver saddle, and 600 mm wheels. No plates, operator names or markings anywhere on it. All three wheels roll.
AnimatedHandcart (Indian Bazaar Street and Temple)
The flat handcart a load is pushed through a bazaar on: a slatted timber deck 2.3 m long with side rails, four 440 mm wheels, a push bar at one end, and three jute sacks and a crate loaded on it. 1.4 x 1.5 x 2.3 m. All four wheels roll.
AnimatedBicycle with Carrier (Indian Bazaar Street and Temple)
A black roadster bicycle leaning on its stand: a straight tube frame, a timber saddle, 680 mm spoked wheels with mudguards, a steel rear carrier and a woven basket over the front wheel. 1.76 m long and 1.1 m tall. Both wheels roll on their own axles.
AnimatedVending Barrow (Indian Bazaar Street and Temple)
The two wheeled barrow a hawker trades from: a slatted timber tray on a frame with a shelf under it, long handles with a prop leg, 760 mm spoked wheels, and two crates of produce on the deck. 1.6 x 0.76 x 2.2 m. Both wheels roll on their own axles.
AnimatedParked Motorcycle (Indian Bazaar Street and Temple)
A commuter motorcycle parked on its side stand: a teal tank, a long seat, a finned engine block and exhaust, a tube frame and forks, and 600 mm spoked wheels with a front mudguard. 1.62 m long, 1.12 m tall. No plate, badge or markings. Both wheels roll.
AnimatedScooter (Indian Bazaar Street and Temple)
A step through scooter on its stand: a legshield and floor, a crimson body with round side panels, a saddle and pillion pad, a handlebar with a headlamp and mirror, and 520 mm wheels with a front mudguard. 1.72 m long, 1.2 m tall. No plate or markings. Both wheels roll.