Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,251 free GLB models
Drift incline ramp (Underground Mine and Shaft Works)
An 8 m ramp module climbing 1 m at one in eight between two drift ports, with a shotcrete invert strip, kerb and wall lights.
Drift cutaway review section (Underground Mine and Shaft Works)
A review variant of the straight drift with the east half of the rock shell removed so the arched section, ditch, bolting and services can be inspected from the side.
Drift dead end working face (Underground Mine and Shaft Works)
A 4 m drift module closed by a blasted rock face with a drilled round pattern, a broken muck pile at the toe and a face inspection light. One open drift port.
Widened drift chamber (Underground Mine and Shaft Works)
A 6 m by 8 m widened chamber module for parking, pumping or storage, with arched drift openings at both ends, a heavier steel roof frame and a raised concrete equipment plinth.
Widened chamber cutaway review section (Underground Mine and Shaft Works)
A review variant of the widened chamber with the east wall removed so the excavated interior, roof frame and equipment plinth can be inspected and photographed from the side.
Left hand drift curve (Underground Mine and Shaft Works)
The mirrored quarter turn drift, running from the north face to the west face on the same 4 m radius grid.
Steel arch set drift section (Underground Mine and Shaft Works)
A 4 m drift section supported by four rolled steel arch ribs on foot plates with steel lagging channels spanning between the ribs and two tie rods.
Right hand drift curve (Underground Mine and Shaft Works)
A quarter turn drift on a 4 m radius grid, running from the north face to the east face with lights on the outer wall and a compressed air line following the curve.
Drift cross junction (Underground Mine and Shaft Works)
A 4 m flat backed four way intersection with arched drift openings on every side, four steel corner columns, a ring beam grid and roof bolts.
Timbered drift set section (Underground Mine and Shaft Works)
A 4 m drift section supported by four three-piece timber square sets with capping plates, angle braces and timber lagging packed against the back.
Straight mine drift 4 m (Underground Mine and Shaft Works)
A 4 m straight hard-rock drift module with a 3.2 m by 3.0 m arched clear section, thick rock shell, drainage ditch, resin rock bolts, a wall cable tray, compressed air and water lines and a bulkhead light.
Drift tee junction (Underground Mine and Shaft Works)
A 4 m flat backed intersection with three arched drift openings and a closed east wall, supported by four steel corner columns, a ring beam and roof bolts.
Shotcrete lined drift section (Underground Mine and Shaft Works)
A 4 m drift section finished with a sprayed shotcrete lining over welded mesh and resin bolts, with the ditch left open at the toe.
AnimatedLoading bay door module (Hardware Store and DIY Warehouse)
A 3.6 m loading bay opening: a rendered wall module with a steel goal post frame, a sectional overhead door of six panels on a named pivot, guide tracks and a vision panel row.
Aisle keep clear chevron tile (Hardware Store and DIY Warehouse)
A 2.0 m square keep clear tile: a painted chevron arrow inside a bordered box, marking the clear zone in front of a loading door or a fire point.
Aisle safety barrier (Hardware Store and DIY Warehouse)
A 2.0 m aisle end safety barrier: two anchored posts carrying a double rail with a mesh infill and a kick plate, the divider between a picking aisle and the shopfloor.
Aisle floor marking corner tile (Hardware Store and DIY Warehouse)
A 2.0 m square floor marking corner: the aisle edge line turns through 90 degrees with a radiused corner, plus a bay corner square and a stop bar.
Aisle floor marking tile (Hardware Store and DIY Warehouse)
A 2.0 m square painted floor marking tile: a sealed concrete slab with two 100 mm aisle edge lines and a hatched pedestrian margin, 6 mm proud of the slab face.
AnimatedAisle entry gate (Hardware Store and DIY Warehouse)
A 1.2 m self closing aisle gate on the same barrier line: a framed mesh leaf on a named pivot with a spring hinge post, a latch keep and a warning plate.
AnimatedTrade counter lift flap (Hardware Store and DIY Warehouse)
A 0.75 m counter access module with a hinged lift flap and a swing gate below it, the staff way through a trade counter run.
Trade counter corner (Hardware Store and DIY Warehouse)
A 0.7 m square trade counter corner that turns a run through 90 degrees: a mitred worktop, plinth returns and clad faces on both outer sides.
Trade counter infill 0.6 m (Hardware Store and DIY Warehouse)
A 0.6 m counter infill module with a single staff shelf and a drop down cable tray under the worktop, used to lengthen a trade counter run to the wall.
Trade counter module 1.2 m (Hardware Store and DIY Warehouse)
A 1.2 m trade counter module: a recessed plinth, a rebated customer face with a rubbing rail, two staff side shelves and a 0.75 m deep postformed worktop with a 20 mm overhang.
Shop bay end upright (Hardware Store and DIY Warehouse)
A run terminating shop shelving upright with a clad end panel and a foot plate, the piece that closes a shelving run and hides the slotted post.