Free models · CC0
Assets
Every model here is CC0 1.0, so you can use it in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
10,964 free GLB models
Touring poles, pair (Backcountry Snowboarding and Avalanche Safety)
Pair of two-section adjustable touring poles with locking collars, moulded grips, straps and powder baskets.
Splitboard separated in skins mode (Backcountry Snowboarding and Avalanche Safety)
The same board taken apart into two skinned halves with the bindings turned fore and aft on their touring pucks.
Powder board with bindings (Backcountry Snowboarding and Avalanche Safety)
Directional 1.62 m powder board with a swallowtail, set back stance and two strap bindings fitted.
Splitboard in ride mode (Backcountry Snowboarding and Avalanche Safety)
Splitboard joined into one 1.58 m board with the centre seam, tip and tail clips and touring pucks visible.
Guide pointing out a line (Backcountry Snowboarding and Avalanche Safety)
Guide stopped on a safe island, one arm out calling the line, probe planted, transceiver worn on a chest harness.
Rider standing with the board upright (Backcountry Snowboarding and Avalanche Safety)
Rider standing in boots at the top of a line, holding the board upright on its tail beside them.
Rider digging a snow pit (Backcountry Snowboarding and Avalanche Safety)
Rider crouched at a pit face shovelling the wall back, spoil thrown out to the side.
Rider seated strapping in (Backcountry Snowboarding and Avalanche Safety)
Rider sitting in the snow with the board across in front, working an ankle ratchet, pack dumped alongside.
Splitboarder skinning uphill (Backcountry Snowboarding and Avalanche Safety)
Touring splitboarder mid stride on two split halves with skins fitted, poles planted, pack loaded for the day.
Containment Laboratory (UFO Crash Site and Recovery Facility)
Composed example for UFO Crash Site and Recovery Facility.
Rider airborne off a natural lip (Backcountry Snowboarding and Avalanche Safety)
Snowboarder in the air off a natural snow lip, knees tucked, front hand grabbing the heel edge between the bindings.
Craft Lineup (UFO Crash Site and Recovery Facility)
Composed example for UFO Crash Site and Recovery Facility.
Hangar Bay with the Saucer (UFO Crash Site and Recovery Facility)
Composed example for UFO Crash Site and Recovery Facility.
Connector Cases (UFO Crash Site and Recovery Facility)
Composed example for UFO Crash Site and Recovery Facility.
Rider crouched in powder (Backcountry Snowboarding and Avalanche Safety)
Snowboarder compressed low in deep snow on a swallowtail board, arms wide, bow wave rolling off the nose.
Rider carving a heelside turn (Backcountry Snowboarding and Avalanche Safety)
Snowboarder laid over on the heel edge mid turn, knees loaded, trailing hand near the snow, with thrown snow off the buried edge.
Crash Site at Night (UFO Crash Site and Recovery Facility)
Composed example for UFO Crash Site and Recovery Facility.
Crane banksman (UFO Crash Site and Recovery Facility)
A 1.8 m adult signalling a lift: high visibility vest with two reflective bands over dark working dress, a hard hat with a brim and chin strap, a radio on the chest and two lit marshalling batons, the right one raised and the left one lowered.
Technician with a tablet (UFO Crash Site and Recovery Facility)
A 1.8 m adult in a light coverall, turned slightly and reading a tablet held in both hands: safety glasses, a lanyard with a blank card, a pen pocket and a tool roll on the hip.
Uniformed guard (UFO Crash Site and Recovery Facility)
A 1.8 m adult in a plain dark uniform standing at ease: peaked cap with an unmarked band, shoulder yoke, duty belt with two pouches and a torch, boot cuffs and a chest radio. Deliberately carries no insignia and no weapon.
Hazmat scientist (UFO Crash Site and Recovery Facility)
A 1.8 m adult standing in a sealed protective coverall: a hood with a clear visor and chin seal, a back-mounted respirator with its breathing hose, a utility belt, taped cuffs and a hand scanner held in both hands. No badge, insignia or agency identity.
Observation gantry (UFO Crash Site and Recovery Facility)
A 7 m elevated observation walkway at 3.4 m: six columns on pads with knee braces, a grated deck, handrails with toe boards on both sides and the end, a nine-tread stair flight with its own rails and a deck light.
Craft support cradle (UFO Crash Site and Recovery Facility)
A 9 m steel cradle holding a disc craft clear of the floor: four A-frame legs on concrete pads tied by a base ring and diagonal braces, four raked saddles with padded top plates and side stops, a hazard band and a four-tread access stair with rails.
Overhead crane rail (UFO Crash Site and Recovery Facility)
A 12.4 m span overhead travelling crane 7.2 m to the walkway: four columns on pads with knee braces, two runway beams, a twin girder bridge on end carriages, a trolley node and a hook block node hanging on its ropes, plus a wall pendant station.