Free models · Game-ready GLB
Realistic
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
11,361 free GLB models
Timber waste pile (Demolition and Site Clearance)
Sorted timber waste 3 m across: joists, floorboards and stud offcuts stacked criss cross with the nails drawn, a broken door leaf leaning on the stack and a cream waste stream plate on a stake, the segregated pile a clearance keeps for the timber skip.
Cut rebar bundle (Demolition and Site Clearance)
Bundle of reinforcement cut out of the slab: forty bars 4 m long wired into two banded bunches on a timber bearer, ends sheared square, with two bent tails sticking out of the bundle and a red end cap tray beside it.
Salvaged steel beam bundle (Demolition and Site Clearance)
Six cut universal beams 6 m long stacked on timber bearers: flanged sections with torch cut ends, web holes where the connections were, a steel banding strap and a painted end mark, sorted out of the demolition for the scrap merchant.
Salvaged brick stack on pallets (Demolition and Site Clearance)
Reclaimed brick banded onto two timber pallets 2.4 m long: cleaned bricks stacked in header and stretcher courses under a steel banding strap, with a cream tally plate wired to the stack, the way salvage is set aside on a clearance.
Graded crusher feed pile (Demolition and Site Clearance)
Feed stock sorted for the crusher: a 4 m heap of picked concrete with the reinforcement cut out, a lower apron of crushed product beside it and the bucket tracks pushed into the toe, the way a feed pile is kept clean.
Rubble pile, large (Demolition and Site Clearance)
The same arisings at 6 m across and 2.2 m high, the stockpile a site pushes up before the crusher takes it: broken concrete, brick and steel settled into a long heap with a loose scattered surface.
Rubble pile, small (Demolition and Site Clearance)
The same arisings at 2 m across and 0.7 m high, the size that gathers at the foot of a wall between passes: broken concrete, brick and steel with a loose scattered surface.
Rubble pile, medium (Demolition and Site Clearance)
Heap of demolition arisings 3.4 m across and 1.2 m high: broken concrete, brick and a little steel settled into the shape a dozer blade leaves, with a scattered surface of loose lumps, for the middle of a clearance.
Demolition wall section, down to rubble (Demolition and Site Clearance)
The same 4 m bay after the wall is down: a 500 mm stub of brickwork on the footing with the broken face showing, a heap of graded masonry rubble across the bay and two lengths of bent rebar lying in it, ready for the loader.
Floor slab section with rebar showing, 4 m (Demolition and Site Clearance)
Broken reinforced floor slab 4 m square and 220 mm thick: a saw cut edge on two sides, a ragged broken edge on the others with the reinforcement mesh bent up out of it, a screed patch lifted clear and ground ports on all four sides.
Demolition wall section, breached (Demolition and Site Clearance)
The same wall section taken back by the machine: a full height pier at one end, a ragged stepped edge of brick teeth, a breach right through the middle at ground level and a broken lintel hanging over it, with bent rebar tails showing in the concrete.
Demolition wall section, intact (Demolition and Site Clearance)
Intact masonry wall section 4 m wide, 3.2 m tall and 320 mm thick: brickwork with proud courses, a concrete lintel over a blocked opening, a cream plaster patch on the inner face and a stub of floor beam left in the pocket, with side ports at 1.4 m so a facade runs on.
Mesh fence foot block (Demolition and Site Clearance)
Moulded concrete fence foot 0.6 m long with two slotted sockets and a moulded handle recess, the block a temporary mesh panel stands in, modelled loose so a run of them can be dropped along a line.
Debris netting scaffold bay, 4 m (Demolition and Site Clearance)
Scaffold screen bay 4 m wide and 4 m tall: a tube and fitting frame of standards, ledgers and a plan brace carrying a blue debris netting panel laced to its edges, with side ports at 2 m so a screen runs along a demolition face.
AnimatedSite hoarding gate panel, 4 m (Demolition and Site Clearance)
The same hoarding line as the site entrance: a 3.4 m sheeted leaf hung on a heavier post with a drop bolt and a latch keep, a red keep clear plate on the closing post, and the leaf swinging clear into the site.
Mesh site fence panel, 3.5 m (Demolition and Site Clearance)
Temporary mesh fence panel 3.5 m wide and 2 m tall in a tubular frame: welded mesh infill, a blue site information plate wired to the rail, and side ports at 1 m so a run of panels closes a compound.
Site hoarding panel, 4 m (Demolition and Site Clearance)
Solid site hoarding bay 4 m wide and 2.5 m tall: blue faced plywood sheeting on a timber frame between two charcoal posts on precast feet, with a capping rail, a blank cream notice board and a yellow warning plate, and side ports so a perimeter repeats.
Mud tracked site ground tile, 4 m (Demolition and Site Clearance)
The same 4 m site module with dried mud trodden across it by the plant: three spread patches standing a few millimetres proud of the slab with two wheel ruts run through them, for the working face and the haul line.
Crushed hardcore haul road tile, 4 m (Demolition and Site Clearance)
The same 4 m site module surfaced with crushed hardcore from the site's own crusher: a 90 mm bed of graded material with loose lumps scattered across it and a rolled crown down the middle, for the haul road and the crusher apron.
Demolition site ground tile, 4 m (Demolition and Site Clearance)
Heavy duty concrete site module 4 m square and 120 mm thick with saw cut joints running each way, laid so its top face is the running surface, with edge ports on all four sides so a whole clearance site repeats from it.
Check in and marshalling lanes (Ferry Terminal and Harbour Crossing)
The land side of the same terminal, closer in: three lanes of painted tiles running up to the check in booths, the barrier arms down and the lane numbers overhead, with two cars, a van and a tractor unit waiting their turn and the supervisor's hut on the kerb.
Ferry terminal at loading time (Ferry Terminal and Harbour Crossing)
A roll on roll off ferry terminal working a sailing: the ship lies astern of the linkspan with its stern ramp over the bridge deck, held off the quay by breasting dolphins and fender panels, and a car is already on the span. Behind it two shore ramps climb from the...
Wayfinding totem (Ferry Terminal and Harbour Crossing)
Double sided wayfinding totem 2.6 m tall: a blue panel on a charcoal plinth with cream direction bands and abstract arrow blocks, a lit strip at the head and a steel edge frame, for the concourse and the marshalling yard.
Covered foot passenger walkway, 4 m (Ferry Terminal and Harbour Crossing)
Covered walkway section 4 m long and 2.6 m wide: a steel deck 0.24 m up with a yellow edge strip, handrails on both sides, four posts and a charcoal canopy with a blue fascia. Ports at both ends so a run reaches from a terminal to a gangway tower.