Free models · Game-ready GLB
Assets
Every model here is a game-ready GLB that drops into three.js, Blender, Godot, Unity and Unreal, free to use in personal and commercial work without crediting anyone.
Files are binary glTF with embedded WebP textures and quantized geometry, which three.js reads natively and Blender, Godot and Unity import as they are, so nothing needs a Draco or KTX2 decoder. Each asset page carries a permanent CDN URL you can load straight from your code.
18,928 free GLB models
Light Bar on a Stand (Nightclub and DJ Booth)
A four head par bar on a wind up tripod stand: a 1.3 m T bar at 1.6 m carrying four cans angled down at the floor, each with a coloured gel frame in magenta, cyan, amber and pale.
Smoke Machine (Nightclub and DJ Booth)
A club smoke machine: a dark cased hazer on four fixed wheels with a real flared nozzle on the front, a control panel with its ready lamp, side handles and a pale fluid bottle stood on the case.
AnimatedDisco Ball on a Motor (Nightclub and DJ Booth)
A 520 mm mirror ball hung under its rotator: the faceted ball on a capped spindle, a drop rod and a dark motor box with its indicator and a shackle on top for the truss clamp.
Laser Effect Unit (Nightclub and DJ Booth)
A housed laser effect: a cast aluminium box with the aperture window and a fan of five emitter lenses behind it, an interlock key panel, a yoke on both cheeks and a rubber base plate.
AnimatedMoving Head Light (Nightclub and DJ Booth)
A moving head spot: a base with a display panel and hook clamp rails, a yoke that pans on it and a head that tilts in the yoke behind a cyan tinted lens. About 750 mm tall at level.
UV Blacklight Bar (Nightclub and DJ Booth)
A 1.1 m ultraviolet wash bar: a single long tube in a dark reflector housing with end caps, on a yoke and hook clamp. Modelled in the deep magenta a UV tube actually reads as.
Strobe Bar (Nightclub and DJ Booth)
A 1.1 m four cell strobe bar: four lamp windows behind pale diffusers in a dark extrusion, with a yoke and hook clamp on top for clamping to a truss chord.
Lighting Truss, Corner Block (Nightclub and DJ Booth)
A 90 degree corner block for the truss grid: a 300 mm cube with a half metre arm on the -X side and another on the -Z side, spigot plates on both, so a rectangular grid closes at every corner.
Hanging Speaker on a Fly Frame (Nightclub and DJ Booth)
The mid cabinet in a fly frame: the box slung between two steel straps under a bumper bar with shackles at both pick points, for flying delay boxes off the truss over the floor.
Speaker Stack Mid Cabinet (Nightclub and DJ Booth)
A two way top box for the head of a stack: a 700 mm trapezoidal enclosure with a horn flare over the compression driver behind the grille, pale banding on the baffle and handles on both cheeks.
Lighting Truss, Straight Bay (Nightclub and DJ Booth)
A 2 m bay of 300 mm square box truss: four chords with a zigzag brace on every face, spigot plates and cone spigots at both ends and a magenta bay label under each plate.
Speaker Stack Sub Cabinet (Nightclub and DJ Booth)
A double 18 inch club subwoofer: a 1.15 m birch enclosure on skid runners with two tuned ports through the baffle, a grille over the mouth, a pale band along the bottom of the baffle and a recessed connector plate on the back.
Backdrop LED Panel Module (Nightclub and DJ Booth)
A 1 m square LED video panel for the wall behind the booth: a cast frame 100 mm deep with a magenta diffuser face ribbed on the pixel pitch, and corner castings on all four edges so panels tile across and up.
Riser Platform Module (Nightclub and DJ Booth)
A 2 by 1 m stage riser at 400 mm: a dark non slip deck in an aluminium edge trim on a folding steel frame with levelling feet, ported on all four edges so risers tile into a booth stage of any size.
Record Crate (Nightclub and DJ Booth)
A 360 mm wooden record crate packed with fourteen 12 inch sleeves in pale, magenta, cyan, amber and grey, leaning back the way a browsed crate does, with cut handholes in both ends.
Backdrop LED Panel Module, Cyan (Nightclub and DJ Booth)
The 1 m backdrop LED panel with a cyan diffuser face, for chequering a video wall two ways so the backdrop reads as a pattern rather than a flat sheet.
DJ Headphones on the Desk (Nightclub and DJ Booth)
A pair of closed back DJ headphones lying on the desk: a padded metal headband with the pale top pad, swivel forks and two earcups with magenta ear pads facing in.
DJ Booth Monitor Wedge (Nightclub and DJ Booth)
A booth monitor: a 400 mm wedge on rubber runners with a perforated grille over the coaxial driver and a pale band along the baffle, aimed up at the DJ from the end of the desk.
Laptop on a DJ Stand (Nightclub and DJ Booth)
A laptop open on a folding X frame stand: a pale bodied machine with its keyboard deck and a lit screen, raised 250 mm above the desk so it clears the mixer.
CDJ Media Player (Nightclub and DJ Booth)
A club media player: a 320 mm deck with a dished metal jog wheel under a pale rim, a raked waveform screen, cue and loop buttons in cyan and the tempo fader down the right hand side.
DJ Mixer (Nightclub and DJ Booth)
A four channel club mixer: a raked control surface with the channel faders and a crossfader in pale caps, a bank of gain and EQ knobs, the printed channel strip and rack ears on both cheeks.
DJ Booth Desk (Nightclub and DJ Booth)
A 1.9 m DJ desk: a pale laminate top at 1 m on dark steel cheeks, a brushed nosing along the working edge, a dropped shelf below for the laptop and a record crate, and a cable trough with its lid along the back.
AnimatedTurntable Deck (Nightclub and DJ Booth)
A direct drive turntable: a 450 mm plinth with a cast aluminium platter on a magenta slipmat, the spindle, a counterweighted S arm with its headshell and cartridge, and the pitch fader plate beside it.
DJ Booth Facade Panel (Nightclub and DJ Booth)
A 1.5 m facade section for the front of a booth or a riser: a framed dark panel with a recessed magenta light box behind a diffuser, aluminium rails top and bottom and stiles at both ends so sections butt into a continuous front.