Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,846 free GLB models
AnimatedFloor standing pillar drill, 1.85 m (Woodworking Workshop and Joinery)
Cast base, a 1.6 m steel column, an adjustable table on its bracket and a grey head with a red belt cover: the quill feeds down on its three ball handles and the chuck and drill bit turn with it.
AnimatedSpindle moulder, 1.1 m (Woodworking Workshop and Joinery)
Green spindle moulder: a cast table with its insert ring over a closed cabinet, a split cream fence on a charcoal body, a yellow ring guard, the rise and fall handwheel and a start and stop station, with the spindle and its cutter block turning in the opening.
AnimatedOpen frame band saw, 2.1 m (Woodworking Workshop and Joinery)
Green cast frame band saw: a heavy plinth, a full height column carrying two exposed 400 mm wheels with charcoal tyres, a tilting steel table with its fence, an adjustable blade guard on its post, a dust port at the lower wheel and a start and stop station.
Planer thicknesser, 1.65 m (Woodworking Workshop and Joinery)
Over and under planer thicknesser in red: infeed and outfeed cast tables set either side of the cutterblock with the infeed 2 mm low, a long steel fence at the back, a yellow bridge guard, a rise and fall handwheel with its scale, an extraction hood and a start and stop station.
AnimatedSliding mitre saw on a folding stand, 1.9 m (Woodworking Workshop and Joinery)
Red sliding mitre saw on a grey folding stand: splayed legs under two top rails, a roller support wing at each end, a charcoal base with a rotating mitre table and a fence, and a saw head on its rear pivot that tilts down through the cut and back.
Dust extraction duct run, 2 m (Woodworking Workshop and Joinery)
Two metre galvanised extraction duct 220 mm across with flanged joints, a bolted hanger strap and a blanked branch takeoff, ported at both ends so a run repeats across the shop to the extractor.
AnimatedCabinet table saw with extension table, 1.6 m (Woodworking Workshop and Joinery)
Cabinet saw on a blue body: a cast steel top split by the blade slot, a lattice extension table on the right, front and rear rails with a yellow rip fence, a riving knife under a crown guard, rise and tilt handwheels, a start and stop station and a dust port at the back.
Workshop ceiling light bar, 2.4 m (Woodworking Workshop and Joinery)
Suspended twin tube light 2.4 m long: a grey steel channel on two drop rods with a charcoal reflector and two cream diffuser tubes, for lighting a bench run or a machine bay.
Workshop floor tile with walkway markings, 4 m (Woodworking Workshop and Joinery)
The same 4 m concrete floor module with a painted safety yellow walkway lane down it, standing 5 mm proud of the slab. Identical edge ports, so it lays into the same grid.
Workshop floor tile, 4 m (Woodworking Workshop and Joinery)
Power floated concrete floor module 4 m square and 120 mm thick with sawn movement joints along both edges, laid on a 4 m grid with edge ports on all four sides.
Workshop wall panel module, 4 m (Woodworking Workshop and Joinery)
Cream painted workshop wall 4 m wide and 2.8 m tall on a concrete plinth, with timber battens, a safety yellow impact rail and a capping rail, side ports on the centre line and a top port for the glazed strip that courses above it.
Workshop window strip module, 4 m (Woodworking Workshop and Joinery)
Glazed clerestory course 4 m wide and 1.2 m tall with charcoal mullions, sill and head, built to sit on the wall panel's top port and carry the run up to 4 m so the bench works under daylight.
Dive Cylinder Rack (Public Aquarium and Marine Centre)
A dive cylinder rack: a welded frame with six 12 litre cylinders standing in shaped seats under a retaining bar, with their valves, boots and a hung regulator set.
Spare Pump Crate (Public Aquarium and Marine Centre)
A spare pump crate: a timber shipping crate with a slatted lid, banding straps and a stencil panel, with a crated spare pump and its motor sitting on top of it.
Chemical Store Cabinet Open (Public Aquarium and Marine Centre)
The chemical store cabinet with both doors already standing open on its shelves of drums, for dressing a plant room without posing a clip.
AnimatedChemical Store Cabinet (Public Aquarium and Marine Centre)
A chemical store cabinet: a bunded steel cupboard on a plinth with a sump floor, three shelves of drums and carboys, hazard panels and two hinged doors.
Service Catwalk Section (Public Aquarium and Marine Centre)
A 2 m section of service catwalk: an open grating deck at 2.4 m on braced legs, with kick plates, a knee rail and a top rail down both sides, for walking the open tops of a tank run.
Floor Drain Grate (Public Aquarium and Marine Centre)
A 0.9 m floor drain: an open channel in a stainless kerb frame under a recessed slotted grate, with a dark sump and a silt bucket visible at one end.
AnimatedHose Reel (Public Aquarium and Marine Centre)
A wall mounted hose reel: a steel drum on a bracket wound with a coiled hose, with a crank handle, a guide roller and a trigger gun hung on the frame.
Wetsuit And Gear Rack (Public Aquarium and Marine Centre)
A wetsuit and gear rack: a tubular frame with a drip tray, four hanging suits on shaped hangers, a shelf of masks and fins and a row of boots underneath.
Net Rack (Public Aquarium and Marine Centre)
A net rack: a freestanding steel frame with a hooked top rail carrying five nets of three sizes, each a hooped bag on a handle, and a drip tray under them.
Feed Fridge Open (Public Aquarium and Marine Centre)
The feed fridge with its door already standing open on the shelves of feed boxes, for dressing a prep room mid shift.
AnimatedFeed Fridge (Public Aquarium and Marine Centre)
An upright feed fridge: a stainless cabinet on a plinth with four wire shelves of stacked feed boxes, a full height gasketed door with a tubular handle and a condenser hood.
Feed Prep Bench (Public Aquarium and Marine Centre)
A feed prep bench: a stainless topped wet bench with an upstand, a chopping board, a knife rail, a pan scale and four graduated feed buckets on the shelf under it.