Free models · Game-ready GLB
Historical
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,182 free GLB models
Launch console bank (Cold War Missile Silo and Command Bunker)
A three-bay crew console: a kick plate carcass, a sloped instrument face, an upright annunciator panel in three bays with lamp and meter rows, a two-position key switch station, a patch jack strip, a paper log tray, a handset cradle and cable stubs at the rear.
Silo exhaust duct headworks (Cold War Missile Silo and Command Bunker)
The exhaust duct headworks at grade: a battered concrete plinth with a rectangular throat built from four slabs, a recessed bore, a heavy grille, a curved deflector hood on struts, a cowled relief stack, a hinged deck cover and deck handrails.
Silo work platform ring, leaves retracted (Cold War Missile Silo and Command Bunker)
The same two-leaf work platform with both grating leaves drawn back into the wall band, leaving a 3.48 m clear bore for a stage to pass.
Silo headworks collar (Cold War Missile Silo and Command Bunker)
The reinforced concrete headworks around the tube bore at grade: a round apron, a raised curb with a steel closure seat, twin door track plinths with rolled rails, anchor blocks, a cable duct, a hinged personnel hatch and a lightning mast.
Period first stage motor (Cold War Missile Silo and Command Bunker)
A generic period first stage: an 8.4 m solid motor case 1.8 m across with a domed forward closure, an aft skirt with access covers and hold-down lugs, a smooth exit bell, field joint bands, an external raceway conduit and a bolted forward attach ring.
Re-entry vehicle shroud (Cold War Missile Silo and Command Bunker)
A 3 m ogive nose shroud over a blunt tip: two half shells joined by longitudinal seam strips, a bolted base separation ring, an umbilical fitting and a flush antenna window.
Period second stage motor (Cold War Missile Silo and Command Bunker)
A generic period second stage: a 1.36 m motor case with a domed closure, a flared interstage skirt with vent slots, a gimballed exit bell on a torus mount, four attitude control thruster clusters and a bolted forward attach ring.
Silo work platform ring (Cold War Missile Silo and Command Bunker)
A two-leaf work platform that clamps to the tube liner: a bolted wall band and two grating leaves with bearer bars, inner handrails and roller carriages, closed around a 2.04 m bore.
Sliding silo blast door (Cold War Missile Silo and Command Bunker)
A ballistic sliding closure: a 6.2 m concrete slab with banded steel edges, lifting eyes and eight rollers, parked open at the far end of an 11.6 m twin rail track, with the bore ring at the closed end and a gas generator actuator with a push rod.
Launch tube cutaway section (Cold War Missile Silo and Command Bunker)
A cutaway section of a hardened launch tube: an 18 m concrete wall 0.52 m thick with a welded steel liner, stiffener rings, three grating work platforms with handrails, a caged ladder, cable raceways, a stepped launch mount and a hazard-banded muzzle seat.
Country station with a passenger train at the platform (Steam Era Railway and Rolling Stock)
A through station: a 4-6-0 and tender at the head of two carriages standing at the up platform, opposite platform, canopies, signal box, footbridge, semaphore signals, nameboard, water crane, lamps and platform traffic. Track modules chain on the 4 m grid and every vehicle...
Goods yard with turntable, engine shed and wagon sidings (Steam Era Railway and Rolling Stock)
A locomotive and goods yard: turntable and two road engine shed at one end, a coaling stage, water tower and goods shed, a shunter with a rake of wagons on the running line, a siding of mineral and hopper traffic behind a buffer stop, and a short 610 mm gauge line with its...
Connector cases for rail, narrow gauge rail, couplers and platforms (Steam Era Railway and Rolling Stock)
Assembly cases proving every declared port type: plain track chained straight to straight and into a curve, a turnout fed from a straight and leading into a diamond, a locomotive coupled to its tender and a van, two narrow gauge modules chained with a saddle tank coupled to a...
AnimatedGoods 0-6-0 in unlined black (Steam Era Railway and Rolling Stock)
The 0-6-0 goods locomotive in the plain black goods finish rather than lined green.
AnimatedGoods 0-6-0 with the smokebox door open (Steam Era Railway and Rolling Stock)
The 0-6-0 goods locomotive posed on shed with the smokebox door swung fully open on its hinge.
AnimatedCompartment carriage in varnished teak (Steam Era Railway and Rolling Stock)
The compartment carriage finished in varnished teak instead of crimson and cream panels.
Station platform end ramp module (Steam Era Railway and Rolling Stock)
The platform module with a sloping end ramp closing the +Z end of a platform run.
AnimatedFlat wagon with a crated load (Steam Era Railway and Rolling Stock)
The flat wagon carrying three strapped timber crates between its stanchions.
Plain track straight 2 m (Steam Era Railway and Rolling Stock)
A 2 m plain track filler module for half grid spacing.
AnimatedOpen mineral wagon loaded with coal (Steam Era Railway and Rolling Stock)
The open mineral wagon carrying a heaped coal load above the side rails.
Semaphore signal cleared (Steam Era Railway and Rolling Stock)
The same lattice post signal with the arm lowered to the clear position.
Narrow gauge track curve (Steam Era Railway and Rolling Stock)
A sharp 25 degree narrow gauge curve on an 8 m radius, as industrial lines use.
Parcels trolley (Steam Era Railway and Rolling Stock)
A four wheel platform parcels trolley with end rails and loaded crates.
Right hand turnout (Steam Era Railway and Rolling Stock)
An 8 m right hand turnout, the handed pair to the left hand unit.