Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,322 free GLB models
Quay crane (Fish Market and Trawler Quay)
A slewing pedestal crane for working boxes out of a hold: a ballasted base and slew ring, a machinery house and counterweight, a lattice jib reaching 8.6 m, head sheaves, a glazed cab with a door and a hook block on the fall.
Concrete slipway (Fish Market and Trawler Quay)
A 10 m ribbed concrete slip rising out of the water to its head: cast in cross ribs for grip, low side walls, a winch post with its drum at the top and yellow kerb blocks either side of the entry.
Quay edge module with ladder head (Fish Market and Trawler Quay)
The 4 m by 3 m edge of the quay: a steel faced coping along the lip, a yellow safety line set back from it, two recessed tie down pockets and the head of a wall ladder, with its curved grab stiles standing above the coping.
Harbour water module, 8 m (Fish Market and Trawler Quay)
An 8 m square of harbour water with a faint swell worked into its surface, for laying the basin around a berth. Ported on all four edges, so the water tiles out to meet the quay rather than leaving a hole in the ground.
Quay deck module, 4 m (Fish Market and Trawler Quay)
The plain 4 m square of a working quay: power floated concrete with saw cut joints and a cast in drain channel under its grating, ported on all four edges so a quay tiles to any size.
Aluminium gangway brow (Fish Market and Trawler Quay)
A 5 m brow from quay to vessel: a treaded deck on two side girders rising 1.9 m, with stanchions, a yellow top rail each side and non slip treads across the run.
Hull fender run (Fish Market and Trawler Quay)
Four cylindrical rubber fenders on their lanyards under a common bar, with rope grommets round their feet, as a vessel hangs them over the side when it comes alongside.
Crew cabin door in a frame (Fish Market and Trawler Quay)
A weathertight steel door in its own frame with a sill, a header, a small light, dogging clips and a lever handle. Fits a deckhouse, a plant room or the back of a market hall.
Fish hold hatch (Fish Market and Trawler Quay)
The big hatch over the hold: a deep coaming with insulated lining and yellow edge strips, and a stiffened lid with its lifting bar, hinged along the forward edge so it stands clear of the working deck.
Deck hatch with a hinged leaf (Fish Market and Trawler Quay)
A flush deck hatch: a welded coaming on a painted surround, a gasketed leaf with hazard stripes and a lift handle, hinged along its forward edge. Fits a working deck or a quayside chamber.
Stern ramp door (Fish Market and Trawler Quay)
The plated leaf that closes the slipway trough: a ribbed deck with side cheeks and hazard stripes, hung on a hinge tube in two brackets, lying aft when it is down and lifting to shut the stern.
Trawl door pair in a deck rack (Fish Market and Trawler Quay)
Two otter boards stowed upright in their deck rack as they are carried alongside: timber and steel faced boards with shoe bars, bridle plates and back strops, held between four stanchions on a common base.
Mast and rigging gantry (Fish Market and Trawler Quay)
The stern gantry: an A frame in tubular steel with raked legs and forward props, a head beam carrying the sheave blocks, a cross tube for the hanging gear and a masthead light, with the wire falls modelled solid.
Net drum on pedestals (Fish Market and Trawler Quay)
The trawl net drum: a wide barrel with end flanges and a wound net, carried on two bolted pedestals with a hydraulic motor and its guard on one end. The drum itself is rigged to spin.
Trawler whaleback shelter (Fish Market and Trawler Quay)
The plated whaleback over the foredeck: a tapering curved shell with grab rails along its crown, bracing to the deck and an opening in its side, which is what keeps green water off the gear on a working trawler.
Trawler wheelhouse (Fish Market and Trawler Quay)
A two deck wheelhouse for a vessel of this size: a casing, raked front window band with mullions, side and after lights, bridge wings on their rails, a mast head with a lamp cluster and a radar bar, a ladder aft and a weathertight door that swings.
Steel trawler stern section with slipway (Fish Market and Trawler Quay)
The after 7 m of the hull, built the way a stern trawler really is: the deck is split by an open slipway trough running up from a raked transom, with rubbing rollers down its cheeks, a bulkhead at its head and the gallows posts and towing beam over the quarters.
Steel trawler bow section (Fish Market and Trawler Quay)
The forward 7 m of a steel stern trawler, modelled from the waterline up: a raked stem with its stem band and bow roller, rising sheer, flared topsides, bulwarks with freeing ports, the windlass and warping ends, and a stowed anchor in its pocket.
Steel trawler midship section (Fish Market and Trawler Quay)
The 7 m midship of the same hull: parallel topsides with the boot topping and sheer stripe, bulwarks and capping rails both sides, pound coamings down the working deck and two deck sockets, ready to take the wheelhouse and the hold hatch.
Supply Crate (Medieval Tournament and Jousting Ground)
Cross braced oak supply crate with corner battens and a hinged lid that lifts on its back edge.
Baggage Cart (Medieval Tournament and Jousting Ground)
Two wheel baggage cart with shafts, a boarded body, a barrel, sacks and a straw load, wheels that roll.
Tally Board (Medieval Tournament and Jousting Ground)
Standing slate tally board ruled into columns with chalk strokes, where the courses are scored.
Stocks (Medieval Tournament and Jousting Ground)
Camp stocks with a hinged upper board that lifts, a bench behind and stone footings.
Ale Jugs (Medieval Tournament and Jousting Ground)
Three glazed jugs and four turned cups on a low serving stool, for the ale line behind the stands.