Free models · Game-ready GLB
Modular
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,072 free GLB models
Terminal facade bay, 4 m (Ferry Terminal and Harbour Crossing)
Glazed terminal facade module 4 m wide and 3.6 m to the eaves: a concrete cill, full height glazing in charcoal mullions, a blue spandrel band under a grey head and a steel eaves flashing. Ports at both ends so a frontage repeats.
Terminal floor tile, 4 m (Ferry Terminal and Harbour Crossing)
Polished concourse floor tile 4 m square with a blue inlay band and a charcoal movement joint, for the passenger terminal floor. Ports on all four edges so a concourse tiles to any size.
Marshalling lane tile, 4 m (Ferry Terminal and Harbour Crossing)
Asphalt marshalling tile 4 m square with two white lane lines 3.2 m apart and a yellow stop bar, for laying out the queueing lanes of a vehicle ferry yard. Ports on all four edges so the yard tiles to any size.
Marshalling lane tile with hatched chevrons (Ferry Terminal and Harbour Crossing)
The same 4 m asphalt marshalling tile marked as a keep clear area: yellow chevrons across the full width between the lane lines, for the no waiting square in front of a linkspan or a barrier.
Quay coping tile, 4 m (Ferry Terminal and Harbour Crossing)
Quay edge slab 4 m along the quay and 3 m deep with a galvanised edge angle, a yellow safety line set back from the lip and two recessed tie down pockets. Ports at both ends so a quay runs to any length.
Harbour water tile, 8 m (Ferry Terminal and Harbour Crossing)
Flat harbour basin tile 8 m square and 0.12 m thick, in dark green harbour water, for filling the berth around a ship. Laid at y=-0.12 its surface sits exactly on y=0, level with the quay the terminal stands on.
Boundary Hedge Section (Dog Agility and Training Field)
A 2 m run of clipped boundary hedge at 1.3 m on a strip of bare earth, ported at both ends so a field boundary runs to any length. Static.
AnimatedRing Entry Gate (Dog Agility and Training Field)
A 3 m gate bay for the ring rope: a hinged 1.4 m blue barred leaf between a hanging post and a strike post, with the rope carrying on from the strike post to the next stanchion. The leaf is one node on the hinge post, so the clip swings it about the real hinge.
Ring Rope and Stanchion Run (Dog Agility and Training Field)
A 3 m bay of ring rope: one 0.52 m stanchion on a weighted foot at the start of the bay, a red top rope and a white lower rope carrying on to the next stanchion, so bays chain into a ring of any shape. Static: rope is a hanging curve a rigid node cannot hold.
Car Park Marking Tile (Dog Agility and Training Field)
A 4 m hardstanding tile in compacted earth with two marked bays and a head line, ported the same way as the grass tile so the club car park joins the field grid. Static.
Worn Grass Ground Tile (Dog Agility and Training Field)
The same 4 m tile in worn bare earth, for the lines a course wears into a field at the jump take offs and along the weaves. Geometry and ports unchanged, so it drops into the grass grid anywhere.
Mown Grass Ground Tile (Dog Agility and Training Field)
A 4 m square of mown turf 6 mm thick with a scatter of longer tufts, ported on all four edges so a training field of any size tiles out of it. Static.
Collapsed Tunnel Entry (Dog Agility and Training Field)
A 0.64 m rigid barrel entry with a 2 m fabric chute lying out behind it, in blue and white bands with the exit hem flat on the grass. The chute is static and the description says so: cloth needs a simulation or a bone per hoop, and one rigid node cannot open it.
Rigid Tunnel Section, Curved (Dog Agility and Training Field)
A 45 degree tunnel bend of 0.64 m bore on a 2.4 m radius, ported at both mouths so a run of straights can be turned out of the dog's line. Static.
Rigid Tunnel Section, Straight (Dog Agility and Training Field)
A 1.6 m straight tunnel section of 0.64 m bore with three coloured hoops, open at both ends and ported so sections chain into a run of any length. Static: a real tunnel is held in shape by sandbags, which are placed separately.
AnimatedExercise paddock gate, 1.5 m (Boarding Kennels and Cattery)
The same 1.5 m paddock panel built as a gate: a braced timber leaf with mesh behind it, two charcoal hinges, a drop latch and a blue marker plate, hung between the posts and ported the same way.
Exercise paddock fence panel, 1.5 m (Boarding Kennels and Cattery)
Timber post and rail paddock panel 1.5 m wide and 1.25 m tall with three rails, galvanised mesh behind them on a 180 mm pitch, charcoal post caps and bolted feet, ported on both edges so panels run round a paddock.
AnimatedIsolation pen module with warning sign (Boarding Kennels and Cattery)
Isolation pen on the same 1.5 m grid, set apart from the blocks: the bay shell with a solid cream door and a glazed viewport, a red warning plate over the head beam, a red band on the dividing wall, a disinfectant foot tray at the threshold and a hand gel dispenser by the jamb.
AnimatedCat flap panel between pen and run, 1.5 m (Boarding Kennels and Cattery)
Painted block panel 1.5 m wide and 2.1 m tall with a framed cat flap through the bottom: a stainless surround, a cream flap on a head hinge with a green kick bar, a green band at hand height and run ports on both edges.
Cattery pen module with shelf ladder, 1.5 m (Boarding Kennels and Cattery)
Cattery pen 1.5 m wide, 2 m deep and 2.1 m to the roof: a painted block dividing wall on its left carrying a three step shelf ladder with green pads and a ramp, a timber sleeping box on the top shelf, a green threshold under the door head and an open back onto the run.
AnimatedOutdoor run gate panel, 1.5 m (Boarding Kennels and Cattery)
The same 1.5 m run panel built as a gate: a mesh leaf on two hinges with an orange kick panel, a mid rail and a charcoal drop latch, hung in the posted frame and ported the same way so it laces into a run of panels.
Outdoor run roof section, 1.5 m (Boarding Kennels and Cattery)
Clear roof module 1.5 m square: a galvanised frame with two purlins, a translucent sheet over it and a blue fascia along the front edge, ported on both sides so sections lay end to end over a row of runs.
Outdoor run mesh panel, 1.5 m (Boarding Kennels and Cattery)
Galvanised run panel 1.5 m wide and 1.85 m tall: two square posts on bolted feet with charcoal caps, a top and bottom rail, welded mesh infill on a 150 mm pitch and an orange kick strip along the bottom, with edge ports for laying a run of them.
Kennel dividing wall panel, 2 m (Boarding Kennels and Cattery)
Standalone painted block wall 2 m deep, 2.1 m tall and 120 mm thick with a charcoal capping rail, a stainless kick sheet on both faces and a blue band at hand height, for capping the end of a run of bays or pens.