Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Chisel and punch tray, 0.7 m (Blacksmith Forge and Armoury)
Oak tray 0.7 m long of hot and cold chisels, round and square punches and a slitting chisel, each one a forged bar with an upset head and a drift mark, laid in the tray the way they come off the bench.
Smith's stool, 0.56 m (Blacksmith Forge and Armoury)
Three legged oak stool with a dished seat and a wedged tenon at each leg, the seat worn pale where it is used, for the bench and the ledger desk.
AnimatedSmith's work bench, 2.0 m (Blacksmith Forge and Armoury)
Oak work bench 2 m long on braced trestle legs with a scorched top, a tool well along the back, a single deep drawer under the front and a rack of punches standing in holes bored along the edge.
AnimatedRiveting bench, 1.5 m (Blacksmith Forge and Armoury)
Armourer's riveting bench 1.5 m long with a steel topped stake plate, two shallow drawers of rivets and washers, a bickern set into the top and the light hammers laid ready on it.
AnimatedBench vice on a stand, 1.0 m (Blacksmith Forge and Armoury)
Heavy parallel bench vice bolted to an oak stand: a cast body with serrated steel jaw plates, a square thread screw with a sliding tommy bar and a small anvil pad cast behind the jaws.
AnimatedLeg vice on a bench post, 1.25 m (Blacksmith Forge and Armoury)
Forged leg vice: a fixed jaw strapped to an oak post with its leg carried down onto a stone pad, a moving jaw on the box screw, a hand lever through the screw head and the spring that opens it, sized for hot work.
Swage block on a stand, 0.92 m (Blacksmith Forge and Armoury)
Cast swage block 0.6 m square pierced with round, square and hexagonal holes and notched all round its edges with half round and vee swages, standing on end in an oak cradle so either face can be worked.
Stake anvil in a block, 0.66 m (Blacksmith Forge and Armoury)
Small bickern stake with a round horn one side and a square bick the other, driven into an oak block and used for the light work a great anvil is too coarse for.
Great anvil on an oak stump, 0.98 m (Blacksmith Forge and Armoury)
A 150 kg London pattern anvil on a banded oak stump: cast body with a ground steel face, a round horn, a hardy hole and a pritchel hole in the heel, staples over the feet and the smith's hammer lying on the face.
Fire irons in a stand, 1.3 m (Blacksmith Forge and Armoury)
Forged rake, poker, slice and fire shovel standing in an iron ring stand on a weighted base, the tools that work the firepot and clear the clinker out of it.
Stone quench trough, 1.6 m (Blacksmith Forge and Armoury)
Hollowed stone quench trough 1.6 m long on two block bearers, filled with still water and with a pair of tongs laid across the rim, for taking the heat out of a forging beside the anvil.
Slack tub, 0.8 m (Blacksmith Forge and Armoury)
Coopered oak half barrel bound with three iron hoops and filled with water, the smith's slack tub for cooling tongs and hardening small work, with a dipper hooked over the rim.
Coal scuttle with shovel, 0.66 m (Blacksmith Forge and Armoury)
Riveted iron scuttle with a swing handle and a rolled rim, filled with coal and with the small fuel shovel standing in it, for carrying fuel from the store to the firepot.
Coal store bay, 2.4 m (Blacksmith Forge and Armoury)
Boarded fuel bay 2.4 m wide with oak corner posts, a low front board and a heaped load of coal and coke behind it, the way fuel is kept dry against the back wall of a smithy.
Stone forge hearth with hood and flue, 3.8 m (Blacksmith Forge and Armoury)
The hearth the shop is built round: a rubble stone bench 2.4 m wide with a raised firepot of coke and glowing coals, a tuyere entering from the back, a stone back wall, and a tapered hood on two iron posts carrying the flue up to 3.8 m, with the fire irons leaning at the side.
AnimatedGreat double bellows on a frame, 2.2 m (Blacksmith Forge and Armoury)
Twin leather bellows on an oak frame 2.2 m long: a fixed lower board, a pleated leather body with iron nail rows, a weighted top board on its hinge nose and the blast pipe running out to the tuyere, worked by the chain hanging at the back.
Timber framed dwarf wall, 4 m (Blacksmith Forge and Armoury)
Waist high oak framed wall 4 m wide and 1.1 m tall with a capping rail, for closing the open side of a workshop without shutting the light or the view out: side ports on the centre line at 0.55 m.
Timber framed wall module, 4 m (Blacksmith Forge and Armoury)
Oak framed wall 4 m wide and 3.2 m tall: a sill beam, corner and middle posts with curved braces, limewashed wattle and daub infill set back between them and a top plate, with side ports on the centre line at 1.6 m.
Forge floor slab, sooted, 4 m (Blacksmith Forge and Armoury)
The flagged 4 m floor module with the scale, clinker and soot of the hearth side trodden into it: raised patches of charcoal dust and a scatter of scale across the flags, on the same edge ports.
Forge floor slab, 4 m (Blacksmith Forge and Armoury)
Flagged stone floor module 4 m square and 130 mm thick, sixteen riven flags standing proud of a bedding slab with open joints between them, laid on a 4 m grid with edge ports on all four sides.
Delivery Tote Stack (Pharmacy and High Street Chemist)
A stack of six delivery totes: moulded crates with ribbed sides, drop on lids and blank docket pockets, the way stock arrives at a chemist.
Measuring Cylinder Set (Pharmacy and High Street Chemist)
A set of three glass measuring cylinders on a stand: plain cylinders with unmarked graduation bands on moulded feet, with a conical measure beside them.
Bagging Station (Pharmacy and High Street Chemist)
A bagging station: a bench top rack of three paper bag sizes with a blank check sheet holder over it, the point a finished prescription is put together for collection.
Dispensing Balance (Pharmacy and High Street Chemist)
A bench dispensing balance: a cast base with a draught shield, a steel pan on its post and a sloped head with a blank display and plain keys.