Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
AnimatedMail ring drum, 1.1 m (Blacksmith Forge and Armoury)
Oak tumbling drum on an iron frame turned by a crank handle, used to clean and burnish drawn mail rings in sand, with a tray of finished rings and a riveting punch on the shelf under it.
Breastplate on a torso form, 1.45 m (Blacksmith Forge and Armoury)
Raised breastplate with a shallow medial ridge and a turned edge, hung on a boarded torso form on a tripod post, with the fauld lames riveted along the bottom and the buckle straps hanging free.
Helm on a shaping form, 1.05 m (Blacksmith Forge and Armoury)
Raised helm skull on a turned oak head form: a two piece bowl with a raised comb, a riveted brow band and the face opening cut, standing on a post so the armourer can work round it.
Blade blank rack, 1.4 m (Blacksmith Forge and Armoury)
Oak rack of forged blade blanks waiting on the grinder: knife, seax and sword blanks with their tangs drawn and their edges still thick and unsharpened, plus two scythe blades and a billhook, which is the shape the work leaves a forge in.
Planishing stake in a block, 0.84 m (Blacksmith Forge and Armoury)
Polished steel planishing stake on a T head set in an oak block, with a bench mandrel beside it and a curved plate laid over the head, the tool that takes the hammer marks out of raised armour.
Armourer's dishing stump, 0.78 m (Blacksmith Forge and Armoury)
Elm stump hollowed with three dishing bowls of different depths, a half finished plate lying in the largest and the raising and dishing mallets standing in the ring beside it.
Finished goods rack, 1.6 m (Blacksmith Forge and Armoury)
Shelved oak rack of finished ironwork ready to go out: hinges and hasps on the top shelf, door furniture and brackets below, hooks and pot cranes hanging off the rail and a box of nails on the floor of it.
Billet stack on bearers, 1.2 m (Blacksmith Forge and Armoury)
Stack of square iron billets and short bloom ends crossed on two oak bearers, chalked with an abstract heat mark, the way stock is kept off a damp floor.
Barrel of blanks, 0.96 m (Blacksmith Forge and Armoury)
Open coopered barrel standing full of forged blanks: hinge straps, hooks, staples and bar ends stood on end, the bulk work a shop turns out between commissions.
Iron bar stock rack, 2.4 m (Blacksmith Forge and Armoury)
Upright oak rack 2.4 m tall with five iron arms holding merchant bar on end: round, square and flat sections in mixed lengths leaning in their bays, the raw material a smithy buys in.
Horseshoe rack, 0.9 m (Blacksmith Forge and Armoury)
Wall rack of finished horseshoes strung on three iron rods by size, front and hind patterns with the nail holes punched and the clips drawn, the standing stock of any village smithy.
AnimatedFarrier's shoeing box, 0.62 m (Blacksmith Forge and Armoury)
Oak shoeing box with a carrying handle and a hinged lid over the nails, the shoe pritchel, the clenching tongs and the rasp, with finished shoes stacked on the lid.
Nail header block, 0.62 m (Blacksmith Forge and Armoury)
Nail maker's stump: a bolster plate and two headers set in an oak block with a tray of finished nails in four sizes beside it, the simplest piecework a smithy ever ran on.
Wire die rack, 0.85 m (Blacksmith Forge and Armoury)
Oak rack of hardened draw plates in falling sizes with a coil of drawn wire on each hook, the plates pierced with graded rows of holes and stamped with an abstract size mark.
Drawing block and draw bench, 1.6 m (Blacksmith Forge and Armoury)
Oak draw bench 1.6 m long for drawing rod down to size: a cast draw plate in an iron frame at one end, a windlass with a ratchet at the other, the drawn rod lying through it and a coil of finished rod on the floor.
AnimatedPolishing wheel bench, 1.1 m (Blacksmith Forge and Armoury)
Leather faced polishing wheel on an oak bench, turned by its own treadle and flywheel, with a shelf of abrasive blocks and tallow under it and a finished plate held ready against the face.
AnimatedTreadle grindstone, 1.2 m (Blacksmith Forge and Armoury)
Sandstone grinding wheel 0.7 m across turning in its water trough on an oak frame, driven by a foot treadle and a crank, with a seat board across the back for the smith who is grinding.
Wall tool board, 1.6 m (Blacksmith Forge and Armoury)
Boarded tool wall 1.6 m wide hung with the tools that are not on the bench: tongs, a set hammer, a hot cut, calipers, a square, a pair of dividers and a coil of binding wire, all on forged hooks.
Leather apron on a hook, 1.0 m (Blacksmith Forge and Armoury)
Scarred smith's apron hanging on a forged hook with its neck strap over the peg, the hide scorched and cut where sparks and scale have landed on it.
File and rasp rack, 0.9 m (Blacksmith Forge and Armoury)
Wall rack 0.9 m wide of eight files and rasps hanging by their tangs: flat, half round, round and square cuts with turned wooden handles, the tools that take the hammer marks off finished work.
Hardy tools in a block, 0.5 m (Blacksmith Forge and Armoury)
Oak block 0.5 m wide standing the anvil's bottom tools upright: a hardy cutting tool, a bending fork, a bottom swage and a cone mandrel, all on square shanks with their edges dressed.
Swage and fuller set on a board, 0.8 m (Blacksmith Forge and Armoury)
Board of bottom and top tooling 0.8 m wide: three matched swage pairs, a top and bottom fuller, a flatter and a set hammer, each with a square shank that drops into the anvil's hardy hole.
Tong rack, 1.2 m (Blacksmith Forge and Armoury)
Iron tong rack 1.2 m wide on two legs holding seven pairs of tongs jaw down: flat bit, bolt, hollow bit, box and pick up jaws, the set a smith reaches for without looking.
Hammer rack, 1.1 m (Blacksmith Forge and Armoury)
Free standing oak rack 1.1 m wide carrying the striking tools in order of weight: two cross pein hammers, a ball pein, a straight pein and a sledge, each head resting on the rail with its haft hanging through.