Free models · Game-ready GLB
Modular
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,072 free GLB models
Headland Strip (Vineyard and Winery)
Four metre grassed headland module: the mown turning strip at the end of the rows, with tufts left standing and a worn earth wheel track along one edge. Tiles with the soil and gravel modules.
Vineyard Soil Tile (Vineyard and Winery)
Four metre cultivated vineyard ground module: worked earth 120 mm thick with eight ridges raked across it and a few weed tufts between them. Tiles edge to edge on the estate grid.
Trellis End Post (Vineyard and Winery)
Raked vineyard end post on a stone footing with four wire brackets, a tensioning wire down to its own ground anchor and a driven steel stake. Takes the pull of a whole row of trellis.
Vine Row Bare (Vineyard and Winery)
Four metre trellised vine row bay in winter condition: three timber posts, a fruiting wire and three pairs of foliage wires, with four pruned vines showing trunk, cordon arms and spur stubs.
Vine Row Leafed (Vineyard and Winery)
Four metre trellised vine row bay in full leaf: the same posts, wires and pruned vines as the bare bay with a two tier canopy tucked between the foliage wires, offset either side of the row so it reads with depth.
Vine Row Fruiting (Vineyard and Winery)
Four metre trellised vine row bay at harvest: canopy along the foliage wires and ten tapered bunches hanging in the fruiting zone under it, on the same three post trellis as the bare and leafed bays.
Ceiling Gantry Beam (Chocolate and Confectionery Factory)
A 5.00 m overhead service beam with a cable tray on one side and four strip lights under the other, hung above a plant floor at 3.60 m.
Factory Floor Walkway Tile (Chocolate and Confectionery Factory)
The 5.00 m floor tile with a 1.60 m amber pedestrian walkway painted across it between two dark edge lines, for marking the route through a plant.
AnimatedFactory Wall Door Panel (Chocolate and Confectionery Factory)
The 5.00 m wall bay with a 1.50 m personnel doorway, a steel frame and a hinged teal leaf with a vision light, on the same ports as the plain bay.
Factory Wall Window Panel (Chocolate and Confectionery Factory)
The 5.00 m wall bay with a glazed viewing band 4.20 m wide at head height, mullioned in three lights, on the same ports as the plain bay.
Factory Floor Tile (Chocolate and Confectionery Factory)
A 5.00 by 5.00 m epoxy floor tile 100 mm thick, the base module of the plant floor, with ports on all four edges.
Factory Wall Panel (Chocolate and Confectionery Factory)
A 5.00 m hygienic wall bay 3.60 m high: a light panel face with joint lines, a steel kerb at the floor and a teal service band, for building a plant room.
AnimatedRoller Conveyor (Chocolate and Confectionery Factory)
A 2.0 m unpowered gravity roller section for cases and totes, on the same datum and port set as the belt straights.
AnimatedConveyor Incline (Chocolate and Confectionery Factory)
A 2.0 m rising conveyor that lifts a line from 0.85 m to 1.75 m over its length, on the same 0.80 m deck as the straights.
AnimatedConveyor Curve (Chocolate and Confectionery Factory)
A quarter turn conveyor module that takes a 0.85 m belt line through ninety degrees, with a turning transfer disc at the corner, a slider plate on the outfeed leg and matching teal rails.
AnimatedConveyor Straight (Chocolate and Confectionery Factory)
A 2.0 m straight belt conveyor on the pack datum: a dark deck between teal side rails at 0.85 m, six driven rollers and a drive box on one leg.
AnimatedEnrobing Line Section (Chocolate and Confectionery Factory)
A 2.4 m enrobing section: a wire belt on a teal frame under a curtain head, with coated centres running through and an abstract control plate on the leg.
Cooling Tunnel Section (Chocolate and Confectionery Factory)
A 3.0 m enclosed cooling tunnel: a teal hood over a dark belt with an open mouth at each end, three chiller units on the roof and an abstract dial plate.
Cobbled Street Module (Canal Town and Windmill)
Free 3D model of a cobbled street tile for a historical canal town kit: 4 m square of sunk granite setts on a bedding slab with a gutter channel.
Pantile Ridge Cap (Canal Town and Windmill)
Free 3D model of a pantile ridge cap module for a historical canal town kit: 4 m of half round ridge tiles on a bedding timber.
Pantile Roof Slope (Canal Town and Windmill)
Free 3D model of a pantile roof slope module for a historical canal town kit: 4 m of rolled clay pantiles on boarded rafters at 45 degrees, with a painted fascia.
AnimatedCanal House Corner Block (Canal Town and Windmill)
Free 3D model of a corner canal house for a historical town kit: stepped gable front with a 4 m return wall down the side street and a wall lantern on the corner.
Town Party Wall Run (Canal Town and Windmill)
Free 3D model of a blank brick party wall run for a historical canal town kit: 4 m module with small lights and a stone coped head.
AnimatedShopfront Bay Front (Canal Town and Windmill)
Free 3D model of a canal town shopfront with a glazed bay and awning for a historical street kit: painted shop bay, blank hanging sign and a stepped gable over it.