Free models · Game-ready GLB
Exterior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
8,322 free GLB models
Sound Suppression Pipe Run (Rocket Launch Pad and Gantry)
An 8 m length of 1.1 m sound suppression water main on concrete saddles, with seven standpipes and outlet heads along the top and a control box on the flank. Ported at both ends, so a suppression ring is built from repeats.
Cable Trench Section (Rocket Launch Pad and Gantry)
An 8 m cast cable trench with five removable lid slabs, a cable bed inside and a yellow duct run along one wall. Ported at both ends so power and signal routes run from the firing room to the pad.
Deluge Pipe Run (Rocket Launch Pad and Gantry)
An 8 m run of 600 mm deluge main on concrete saddles, with flanged ends, a standpipe tapping and an isolation valve body. Ported at both ends on the pipe centreline so a water main runs the length of the pad.
Deluge Pipe Elbow (Rocket Launch Pad and Gantry)
The deluge main turning a right angle on the same 8 m module: a north port and a west port meeting at a swept bend on its saddles, so the water main can follow the pad boundary.
Water Deluge Head (Rocket Launch Pad and Gantry)
A 6.7 m deluge head: a mast on a concrete footing carrying a spray ring of eight nozzle arms, with the feed pipe coming in at ground level through a valve block and a ladder up the mast. Sprays are not modelled.
AnimatedLaunch Mount with Clamps (Rocket Launch Pad and Gantry)
The launch mount: a ring deck 11.5 m across on six columns over the trench mouth, railed all round, with a yellow kick ring for the vehicle skirt and four hold down clamps on hinge posts that swing clear at release. Umbilical plate and cryogenic risers on one flank.
Flame Deflector (Rocket Launch Pad and Gantry)
A steel framed double wedge deflector, 3.4 m wide and 2.8 m tall, that splits the exhaust plume down both arms of the trench. Ablative dark face, a bolted cradle underneath and a cooling water manifold along each flank.
Launch Table (Rocket Launch Pad and Gantry)
A 7.2 m steel launch table for a small vehicle: four jack posts on pads, a bolted deck frame with an open flame hole, a railed working deck, an access stair and a blank hazard plate on the front girder.
Flame Trench Section (Rocket Launch Pad and Gantry)
An 8 m section of flame trench: two 2.6 m concrete walls with a coping lip and a scorched lining, a sloped channel floor 3.4 m across, a drain sump and deluge nozzles along both kerbs. Ported at both ends so the trench runs as far as the pad needs.
Hardstand Module (Rocket Launch Pad and Gantry)
An 8 m hardstand module for parking transporters, carts and skids beside the pad: a gravel bed, a laid concrete deck with joint lines and a yellow kerb down each side. Ported on all four edges to the same grid as the apron.
Pad Apron Module (Rocket Launch Pad and Gantry)
An 8 m square reinforced concrete pad apron module, 180 mm thick, with cast joint strips, a central drain channel and four bolt groups. Edge ported north, south, east and west so an apron of any size tiles out of repeats.
Scorched Apron Module (Rocket Launch Pad and Gantry)
The pad apron module in flame washed dark concrete, with soot patches where the exhaust plume has swept the slab. Same 8 m module and the same four edge ports, so it drops straight into an apron built from the clean tiles.
AnimatedMadrasa Study Cell Front (Desert Mosque and Madrasa Courtyard)
Free 3D model of a madrasa study cell front for a desert courtyard: a 3 m wall bay with a pointed doorway, a banded cedar door that swings, a grilled light and tile panels.
Shade Canopy On Poles (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m shade canopy on four cedar poles for a desert courtyard: a braced frame with a split cane matting deck, 3 m tall.
Courtyard Sundial (Desert Mosque and Madrasa Courtyard)
Free 3D model of a stone courtyard sundial for a desert mosque or madrasa: a turned pillar carrying a plain plate with radial hour ticks and a brass gnomon.
Date Palm (Desert Mosque and Madrasa Courtyard)
Free 3D model of a date palm for a desert mosque courtyard or oasis scene: a 5.3 m scarred trunk with eleven fronds and three fruit bunches, 6 m tall.
Courtyard Tree In A Well (Desert Mosque and Madrasa Courtyard)
Free 3D model of a courtyard tree in a stone planting well for a desert mosque or madrasa: a 2.4 m kerbed well of sand with a broad crowned tree, 4.6 m tall.
Courtyard Stone Bench (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 2 m stone bench for a desert mosque courtyard or arcade walk: a dressed slab on two block legs with a low back rail.
AnimatedWell Head With Windlass (Desert Mosque and Madrasa Courtyard)
Free 3D model of a stone well head with a cedar windlass for a desert courtyard: a carved kerb, two posts, a lintel and a drum that winds, with a hanging bucket.
Water Channel Runnel (Desert Mosque and Madrasa Courtyard)
Free 3D model of a 3 m water channel and runnel module for a desert mosque courtyard: a tiled cut with dressed kerbs, a still water surface and a stop at each joint.
Ablution Fountain (Desert Mosque and Madrasa Courtyard)
Free 3D model of an octagonal ablution fountain for a desert mosque courtyard: a 3.4 m tiled basin with eight brass spouts, an upper bowl and a brass finial.
Cistern Cover (Desert Mosque and Madrasa Courtyard)
Free 3D model of a stone cistern cover for a desert courtyard: a 2 m stepped kerb with an iron capped mouth and a lifting ring, 0.6 m tall.
Wall Lantern Bracket (Desert Mosque and Madrasa Courtyard)
Free 3D model of an iron wall bracket carrying a pierced brass and glass lantern, for a desert mosque courtyard arcade or a madrasa cell front.
Iron Window Grille (Desert Mosque and Madrasa Courtyard)
Free 3D model of a wrought iron window grille in a dressed stone surround for a desert mosque or madrasa: a 1.16 m honeycomb lattice with a sill and a hood.