Free models · Game-ready GLB
Exterior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,915 free GLB models
Floating pontoon module, 8 m straight (Marina and Yacht Club)
Floating walkway module 8 m by 2.4 m: a charcoal float with a grey composite deck 0.34 m above the water, galvanised rubbing strakes and yellow edge strips. Ports at both ends and at four berth positions on the sides.
Slipway, 6 m (Marina and Yacht Club)
Concrete launching slipway 6 m wide and 6 m long: a flat head apron level with the quay, a grooved ramp falling 1.1 m into the water and kerbs each side, for launching a dinghy or a trailer boat from a marina yard.
Floating pontoon module, tee with spur (Marina and Yacht Club)
The same 8 m floating walkway with a 1.2 m spur off one side, for the head of a gangway or a branch pontoon. Ports at both ends, at the spur head and at four berth positions.
Floating pontoon module, corner (Marina and Yacht Club)
Floating walkway corner 2.4 m square turning a pontoon run through a right angle, with the same float, deck, rubbing strakes and edge strips. Ports on the two open faces.
Harbour wall module, 4 m (Marina and Yacht Club)
Quay wall unit 4 m long: a concrete face 1.4 m from the coping down past the waterline, a coping 60 mm proud of the yard, a charcoal rubbing strake at the water and two cast mooring eyes. Ports at both ends so a quay runs to any length.
Car park bay module, 4 m (Marina and Yacht Club)
The same 4 m hardstanding slab marked out as two parking bays: white bay lines, a painted kerb strip and a blue accessible square, for the members' car park behind a marina yard.
Hardstanding tile, 4 m (Marina and Yacht Club)
Yard hardstanding slab 4 m square and 0.6 m thick with a sawn movement joint and a recessed drainage channel, for the quayside apron and boat park of a marina. Ports on all four edges so the yard tiles to any size.
Sea water plane module, 8 m (Marina and Yacht Club)
Flat harbour water module 8 m square and 0.12 m thick in dark green basin water, laid edge to edge so a marina sits in a surface rather than a hole. Ports on all four edges. Laid at y=-0.12 its surface is exactly y=0.
Access Road Module (Rocket Launch Pad and Gantry)
An 8 m access road module: a gravel shoulder each side of a 6.4 m dark carriageway with a dashed centre line and concrete kerbs. Ported on all four edges so a road runs across the site on the same grid.
Burnt Scrub Ground Tile (Rocket Launch Pad and Gantry)
The gravel ground module in burnt dark ground with pale scree patches, for the scorched land downrange of the pad. Same 8 m module and the same four edge ports.
Gravel Ground Tile (Rocket Launch Pad and Gantry)
An 8 m gravel ground module for the ground between the pad structures, with scattered stones on the surface. Ported on all four edges to the same grid as the apron and hardstand modules.
Warning Sign Board (Rocket Launch Pad and Gantry)
A 2.7 m roadside warning board on two posts and ballast pads: a large blank yellow face and a blank white panel below it, with a red marker block on the frame. Deliberately unlettered so a developer can put their own text on it.
Debris Catch Net Frame (Rocket Launch Pad and Gantry)
A 9 m debris catch net: two braced posts on ballast pads carrying a top and mid rail with a corded net across them. The net is modelled solid and static, because a net needs a deformable mesh.
AnimatedPad Fire Truck (Rocket Launch Pad and Gantry)
An 8 m pad fire truck body: a red cab and locker body with roll up locker faces, a roof water tank and monitor, warning beacons, a cab door that opens and four wheels that roll. No service, brigade or maker mark anywhere.
AnimatedCrew Transfer Van (Rocket Launch Pad and Gantry)
A 6.4 m crew transfer van body: a raised white cabin on a chassis with a roof rack and plant box, blank glazed windows, side steps, a door that opens and four wheels that roll. No livery, badge or operator mark anywhere.
AnimatedSite Office Cabin (Rocket Launch Pad and Gantry)
A 9 m portable site office: a ribbed cabin on a skid chassis with a steel roof, six windows, an entrance door on a railed landing, a roof plant box and a blank notice board beside the door.
AnimatedPerimeter Gate (Rocket Launch Pad and Gantry)
An 8 m two leaf vehicle gate between two posts on ballast pads, with a mesh infill, a blank sign plate on each leaf and a card reader pedestal. Both leaves swing open on their own nodes.
Perimeter Fence Panel (Rocket Launch Pad and Gantry)
A 4 m security fence panel, 3 m to the top strand: mesh on two rails between posts on ballast pads, with raked arms carrying three strands. Ported left and right so a perimeter is built from repeats.
Windsock Mast (Rocket Launch Pad and Gantry)
A 7.5 m windsock mast on a concrete footing: a braced column, a swivel ring and a banded red and white sock streaming to one side, with a small light box below the head.
AnimatedPad Camera Tower (Rocket Launch Pad and Gantry)
A 11.7 m pad camera tower: a lattice mast on a footing with a railed platform, a ladder, a signal cabinet and a tracking camera on a pan head that sweeps across the pad and back.
Floodlight Mast (Rocket Launch Pad and Gantry)
A 12.7 m floodlight mast: a braced tapered column on a concrete footing carrying a head frame of four aimed floodlights, with a control box at the foot and a marker light up the column.
Lightning Arrestor (Rocket Launch Pad and Gantry)
A 7.9 m lightning arrestor for a tank farm or a cart park: a braced steel pole on a concrete footing with insulator rings, an air terminal, an earth box and a downlead to a ground rod, plus a blank warning plate.
AnimatedGround Power Unit (Rocket Launch Pad and Gantry)
A 3.6 m skid mounted ground power unit in safety yellow: a louvred generator enclosure with an exhaust stack, a lifting frame, a control panel with a blank display and a cabinet door that opens.
AnimatedNitrogen Purge Cart (Rocket Launch Pad and Gantry)
A four wheel gaseous nitrogen purge cart, 2.6 m long: four bottles in a cabinet frame, a regulator panel with a blank gauge face, two outlet risers on the top deck and a tow handle. All four wheels roll.