Free models · Game-ready GLB
Historical
Every historical model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,472 free GLB models
Clothes Hook Rail (Roman Bathhouse and Palaestra)
A 1.6 m clothes hook rail: five bronze double hooks on a timber batten with iron end straps, for the wall over a changing bench. Mount it at the height a scene wants; the model rests on y=0 with the batten just above the ground.
Apodyterium Changing Bench with Cubbies (Roman Bathhouse and Palaestra)
A 2.4 m changing bench for an apodyterium: a travertine seat on three piers with a marble top, against a rendered back wall carrying two ranks of timber cubby shelves divided into eight openings, with a folded towel and a pair of sandals left in them.
AnimatedWater Lifting Wheel (Roman Bathhouse and Palaestra)
A timber water lifting wheel 3.1 m across on two tufa piers, with twelve rim buckets on a lead axle over a feed trough. The wheel is one named node and spins on its axle; the water in the trough is a still slab, and nothing pours, because a falling stream is not geometry.
AnimatedBronze Stopcock Valve (Roman Bathhouse and Palaestra)
A bronze stopcock on a lead main, 950 mm tall: a cast body on a travertine block with a plug valve and a cross handle. The handle is a named node on the valve axis and turns; the water in the pipe is not modelled.
Drain Channel Run (Roman Bathhouse and Palaestra)
A 2 m drain channel run: a mortar trough between travertine kerbs, 320 mm high and 560 mm wide, open along its length for the overflow off a pool or a wash down floor. Runs butt end to end.
Lead Pipe Run (Roman Bathhouse and Palaestra)
A 2 m run of folded lead water pipe on two travertine saddles, 150 mm in the bore, with a soldered seam along the top, bronze collars at both joints and a strap at each bearing. Runs butt end to end along a wall or a trench.
Drain Channel Run with Grate (Roman Bathhouse and Palaestra)
The same 2 m channel closed with a bronze bar grate on a lead frame, which is what a bather walks over. Same channel ports, so grated and open lengths run together.
Water Spout Mask (Roman Bathhouse and Palaestra)
A carved stone spout head 560 mm square: an abstract rosette boss of concentric rings and twelve radial cuts on a travertine block, with a bronze nozzle through the middle. It is a pattern, not a face or a creature, so it carries no deity and no portrait.
Furnace Wood Store (Roman Bathhouse and Palaestra)
A timber wood store for a bath house furnace, 2.4 m wide and 2 m tall: four posts carrying a plank roof over three courses of split logs stacked crosswise. Fuel for the praefurnium, and the only thing in the pack that is meant to be consumed.
Fountain Basin (Roman Bathhouse and Palaestra)
A wall fountain basin 1.9 m wide: a travertine trough on four walls with a moulded marble rim, a red panelled back slab under a marble voussoir arch, and a bronze spout over the water. The water is a still translucent slab and the spout does not run.
Labrum Basin on Stand (Roman Bathhouse and Palaestra)
A labrum: a 1.75 m marble washing basin on a turned baluster stand, 1.5 m tall, with a red rim moulding, a short bronze filler in the middle and a flat still water surface in the bowl. It stands in the apse of a hot room for a bather to splash from. The water does not move.
Boiler Tank and Setting (Roman Bathhouse and Palaestra)
A bronze boiler tank on its brick setting, 2.2 m tall: a riveted drum banded in iron with a domed head, lifting lugs and lead feed and draw off pipes, standing over the flue of a furnace.
Tepidarium Hypocaust Cutaway Floor (Roman Bathhouse and Palaestra)
A 4 m square tepidarium floor shown as a cutaway section: fired clay pilae stacks in a 660 mm grid under a suspended deck of tiles, mortar screed and mosaic, with one quarter of the deck and its pilae removed so the 790 mm heating void underneath is open to view.
AnimatedPraefurnium Furnace Mouth (Roman Bathhouse and Palaestra)
A praefurnium furnace mouth 2.6 m wide: a brick faced stokehole with a voussoir arch, an iron door on a single hinge, the fire chamber behind it and a raked ash apron in front, under a projecting flue breast.
Wall Flue Tile Run (Roman Bathhouse and Palaestra)
A 1 m run of wall flue tiles 2.6 m tall: two columns of box section tubuli bedded on a mortar backing with a travertine capping, the hollow of each tile read as a recessed panel. Flues line the wall of a heated room and carry the furnace gas up behind the plaster.
Hypocaust Pilae Stack (Roman Bathhouse and Palaestra)
A single hypocaust pilae stack 790 mm tall: a mortar footing, a column of square fired clay bessales laid with a mortar joint between each, and a bedding tile on top. Stacks stand in a grid under a suspended floor so the furnace gas can run between them.
Frigidarium Cold Plunge Basin (Roman Bathhouse and Palaestra)
A cold plunge basin for a frigidarium, 3.5 m by 2.5 m and 1.05 m high: a mortared tank lined in white marble with a red inlaid floor band, a moulded marble rim, three steps down into it at one end and a pair of bronze grab rails over them.
Caldarium Apse Section (Roman Bathhouse and Palaestra)
A semicircular apse section for the end of a hot room, 5.2 m across and 4 m to the springing: a coursed travertine drum 420 mm thick with a moulded cornice, the first three courses of the half dome over it, and a marble bench running round the foot.
Caldarium Hot Pool (Roman Bathhouse and Palaestra)
A hot pool for a caldarium, 4.5 m by 2.9 m and 850 mm high: a marble lined tank with a seat ledge along both long sides, a moulded rim, and a bronze delivery spout on a pedestal at one end.
AnimatedBoundary Wall Gate (Roman Bathhouse and Palaestra)
The same 2 m boundary run as a gateway: two tufa piers with moulded caps and a pair of iron strapped timber leaves hung between them. Same run ports, so it drops into a length of plain wall.
Boundary Wall Run (Roman Bathhouse and Palaestra)
A 2 m run of precinct boundary wall 2.56 m tall: a mortared core faced in four courses of brown tufa ashlar with a travertine coping over it. Runs butt end to end round a palaestra or a service yard.
Dome Section with Oculus (Roman Bathhouse and Palaestra)
A 5.3 m dome on a low drum with an open oculus at the crown: a coffered shell of five rings on a moulded cornice, the eye ringed in marble. It is a section for capping a hot room, and the oculus is a real hole through the shell, so a scene under it is lit rather than sealed.
Groin Vault Section (Roman Bathhouse and Palaestra)
A groin vault bay 4 m by 2 m: two barrel shells crossing at right angles on four corner piers, with marble ribs run along the four groins to the crown. It is a section, not a whole room: repeat it or butt it to a barrel run.
Colonnade Portico Run (Roman Bathhouse and Palaestra)
A 2 m portico run for a palaestra walk: a Tuscan column on a stylobate, the entablature over it, a 5.1 m ashlar back wall and a terracotta tiled lean to roof between the two, 3.2 m deep. Runs repeat along the walk and turn at a corner by butting end to end.