Free models · Game-ready GLB
Vehicles
Every vehicle below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole vehicles set from the packs.
1,009 free GLB models
AnimatedLifeboat in gravity davits (Cruise Ship Deck and Lounge)
Boat station 8.5 m long: an enclosed orange red lifeboat with a white canopy, window bands and a lifting hook, carried on a pair of white davit arms that swing the boat out over the ship's side and down, with the winch house, heel sockets and bed chocks fixed to the deck.
AnimatedHand pallet truck (Vertical Farm and Hydroponics Tower)
A hand pallet truck: steel forks that rise on the pump, a tiller arm that rocks back with its grip and trigger, steer wheels at the head and tandem load rollers at the fork tips.
AnimatedScissor lift work platform, raised (Vertical Farm and Hydroponics Tower)
The same scissor lift at full height with the stack extended and the deck at 2.6 m, for servicing the top tier of a rack or the duct run. Wheels turn and the deck gate swings; the linkage is baked in the raised pose.
AnimatedRack shuttle robot on rail (Vertical Farm and Hydroponics Tower)
An automated tray shuttle on its own 2 m rail section: a low carriage with guide rollers, a telescopic transfer deck carrying a grow tray and a blank status panel. The carriage runs the rail and the transfer flap at the rail end lifts.
AnimatedScissor lift work platform, stowed (Vertical Farm and Hydroponics Tower)
A compact electric scissor lift stowed: a yellow chassis on four solid tyres, a two stage scissor stack, a guarded work deck with a swinging entry gate and a blank control box on the rail.
Boat on a cradle under a winter cover (Marina and Yacht Club)
Yacht laid up ashore: a hull on a steel cradle under a navy winter cover on a timber ridge frame, tied down along both sides, with a ladder to the deck and a blank lay up label on the bow chock.
AnimatedBoat road trailer (Marina and Yacht Club)
Braked road trailer 5.4 m long for a trailer sailer: a galvanised A frame drawbar with a coupling head and jockey wheel, a winch post with a strap, keel rollers, padded bunks, mudguards, a lighting board and wheels that roll.
AnimatedTravel boat hoist with slings (Marina and Yacht Club)
Self propelled travel hoist 7.4 m wide and 6.2 m tall: a yellow portal frame on four steered wheel bogies, a driver's platform, two sling beams with webbing strops and a cross traverse. The slings lift and the beam traverses.
AnimatedSailing dinghy on a launching trolley (Marina and Yacht Club)
Two person sailing dinghy 3.9 m long on a galvanised launching trolley: a glassfibre hull with side tanks, thwart, centreboard case and rudder stock, chocked on padded bunks with a handle and two pneumatic wheels that roll.
RIB tender, 4.2 m (Marina and Yacht Club)
Rigid inflatable tender 4.2 m long: a grey glassfibre vee hull with charcoal sponsons, a teak slatted sole, a centre console with a blank display and a grab rail, two jockey seats, an outboard on the transom and bow towing eye.
Motor cruiser with flybridge, 11.5 m, navy (Marina and Yacht Club)
Planing motor cruiser 11.5 m long: a hard chine hull with a bathing platform and shaft legs, a glazed saloon and helm, a teak cockpit, side decks with guardrails, and an open flybridge with its own console and rails.
Motor cruiser with flybridge, 11.5 m (Marina and Yacht Club)
Planing motor cruiser 11.5 m long: a hard chine hull with a bathing platform and shaft legs, a glazed saloon and helm, a teak cockpit, side decks with guardrails, and an open flybridge with its own console and rails.
Yacht mast with boom and standing rigging (Marina and Yacht Club)
Deck stepped aluminium mast 12.6 m tall with a swept spreader pair, cap and lower shrouds, a forestay and backstay, a kicking strap, a boom on its gooseneck, mast steps and a masthead fitting with a blank wind vane.
AnimatedSloop deck module with cockpit and wheel (Marina and Yacht Club)
Aft deck section of a cruising sloop 3.6 m long: a teak cockpit sole, coamings, helm seat, a wheel on its pedestal with a blank instrument pod, two primary winches, a locker top and a stern rail. The wheel and winches turn.
Sailing yacht hull, 9.6 m (Marina and Yacht Club)
Cruising sloop hull 9.6 m long with white topsides: a moulded deck, a coachroof with hatches and sliding companionway, a teak cockpit sole, guardrails, pulpit and pushpit, and a fin keel with a lead bulb below the waterline.
Furled sail set (Marina and Yacht Club)
Sail set stowed as a boat lies on its berth: a mainsail flaked on the boom under a navy sail cover with tie straps, and a headsail rolled on its foil with a UV strip, both in plain cloth with no sail number or insignia.
Sailing yacht hull, 9.6 m, navy (Marina and Yacht Club)
Cruising sloop hull 9.6 m long with navy topsides: a moulded deck, a coachroof with hatches and sliding companionway, a teak cockpit sole, guardrails, pulpit and pushpit, and a fin keel with a lead bulb below the waterline.
AnimatedPad Fire Truck (Rocket Launch Pad and Gantry)
An 8 m pad fire truck body: a red cab and locker body with roll up locker faces, a roof water tank and monitor, warning beacons, a cab door that opens and four wheels that roll. No service, brigade or maker mark anywhere.
AnimatedCrew Transfer Van (Rocket Launch Pad and Gantry)
A 6.4 m crew transfer van body: a raised white cabin on a chassis with a roof rack and plant box, blank glazed windows, side steps, a door that opens and four wheels that roll. No livery, badge or operator mark anywhere.
AnimatedNitrogen Purge Cart (Rocket Launch Pad and Gantry)
A four wheel gaseous nitrogen purge cart, 2.6 m long: four bottles in a cabinet frame, a regulator panel with a blank gauge face, two outlet risers on the top deck and a tow handle. All four wheels roll.
Crawler Transporter Deck (Rocket Launch Pad and Gantry)
A 16 by 13 m crawler transporter: a levelling deck on four track units with jacking cylinders, four hold down points, railed edges, hazard striping and two blank operator cabs. Carries a launch mount or a whole vehicle stack.
AnimatedGrid Fin Set (Rocket Launch Pad and Gantry)
A 3 m forward hull section carrying four lattice grid fins stowed flat against it, each a framed grid of vanes on its own hinge fitting. The four fins deploy out to the airstream and fold back, one node each.
AnimatedTransporter Erector (Rocket Launch Pad and Gantry)
A 19 m transporter erector: an eight wheel chassis with a blank cab and a hydraulic pack, carrying a trussed erector beam on a rear hinge with four vehicle cradles and their rollers. The beam raises on its own node and the wheels roll.
Engine Cluster (Rocket Launch Pad and Gantry)
A seven engine cluster on its thrust structure: a ring beam on four posts with a cross brace, one centre bell and six round it on gimbal blocks, each with a turbopump box and propellant feed stubs. 3.7 m across, 3.4 m tall.