Free models · Game-ready GLB
Roads infrastructure
Every low-poly modern roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
41 free GLB models
Pole and Wire Fence Section (Safari Camp and Bush Lodge)
A 2.4 m fence bay: two timber poles 1.25 m high with capped tops, three strained wires and one diagonal stay. Chains end to end on the start and end ports and meets the camp gate on the same ports. Static geometry: the wires are solid rods.
AnimatedCamp Gate with Blank Sign Board (Safari Camp and Bush Lodge)
A 3.6 m camp entrance: two heavy timber posts under a lintel, a hanging sign board left blank on both faces to letter, and a 2.5 m braced gate hung on the left post. The gate is one node and swings on the clip. Meets the pole and wire fence on the same ports.
Bush Track Module (Safari Camp and Bush Lodge)
A 6 m square of bush track: two wheel ruts 0.55 m wide worn 40 mm into the dust on a 1.7 m gauge, a strip of dry grass growing up the middle and verges either side. Shares the ground module ports, so a track runs through a tiled plot.
Cattle Grid (Radio Telescope Array and Field Station)
The cattle grid where the track crosses the perimeter line: a sunk pit under a run of steel bars in a concrete surround, with a red marker post at each side.
Track and Verge Module (Radio Telescope Array and Field Station)
An eight metre ground module carrying the site track: a graded running surface, a gravel shoulder either side and scrub on the verge, ported to the same grid as the ground.
Hardstanding Module (Radio Telescope Array and Field Station)
An eight metre concrete hardstanding module with kerb edges, the surface a yard, a dish pad or a cabin row stands on, ported to the same grid as the ground.
Roadside pylon sign, blank panels (Retro Diner and Roadside Motel)
The high sign a driver reads from the highway: a concrete base, two chrome posts, a lower blank reader board and a 3 m turquoise cabinet with a blank lit face, a coral rule and a neon outline on both sides, capped by seven lamp globes at 7.9 m. Wordless throughout.
Arrow sign frame, blank (Retro Diner and Roadside Motel)
A pointing arrow sign on a single post, 3.9 m tall: a coral arrow frame with a blank lit face inside it and ten lamp globes round the edge. Set it at the mouth of a lot. There is no wording on it at all.
AnimatedPeriod fuel pump (Retro Diner and Roadside Motel)
The tall visible register pump of the period: a coral body on a dark plinth with a blank dial panel and three plain rate bars, a glass cylinder under a pale crown, a side standard and a holstered nozzle on its own named node. No fuel company name appears on it.
Fire hydrant (Retro Diner and Roadside Motel)
A 950 mm coral hydrant on a flanged base: the barrel, a chrome collar, two side outlets with caps, a front pumper outlet and a domed bonnet. Set it on the verge or against the kerb.
Lot lamp post (Retro Diner and Roadside Motel)
A 6 m lot lamp: a concrete base, a tapered chrome column, a raked arm and a shallow enamel lantern with a warm lens. The lens is geometry with an emissive material; the pack embeds no lights, so a project adds its own.
Wheel stop (Retro Diner and Roadside Motel)
The precast stop at the head of a parking bay: a 1.7 m concrete block with a chamfered top and two pinned dowels standing proud of it. Set one per bay against the kerb.
Kerb module (Retro Diner and Roadside Motel)
A 2 m precast kerb for the edge of a lot: a 300 mm section with a chamfered top course and a painted coral nosing standing proud of the face. Run the sections end to end round a car park or along a walk.
Road module with centre line (Retro Diner and Roadside Motel)
A 5 m length of two lane blacktop, 6 m wide, with a broken centre line and both edge lines painted proud of the wearing course. Run the lengths end to end along the front of a lot to lay the highway a roadside stop faces.
Car park bay module (Retro Diner and Roadside Motel)
A 5 m by 6 m module of marked lot tarmac holding two parking bays: the wearing course with the painted bay lines and the head line standing proud of it, so a field of modules never flickers. Tile it edge to edge to lay a whole car park.
Floor Drain Run (Chocolate and Confectionery Factory)
A 2.4 m hygienic floor drain channel with a slotted stainless grate, a kerb on each side and a sump at one end, set into the epoxy floor.
AnimatedRoller Conveyor (Chocolate and Confectionery Factory)
A 2.0 m unpowered gravity roller section for cases and totes, on the same datum and port set as the belt straights.
AnimatedConveyor Incline (Chocolate and Confectionery Factory)
A 2.0 m rising conveyor that lifts a line from 0.85 m to 1.75 m over its length, on the same 0.80 m deck as the straights.
AnimatedConveyor Curve (Chocolate and Confectionery Factory)
A quarter turn conveyor module that takes a 0.85 m belt line through ninety degrees, with a turning transfer disc at the corner, a slider plate on the outfeed leg and matching teal rails.
AnimatedConveyor Straight (Chocolate and Confectionery Factory)
A 2.0 m straight belt conveyor on the pack datum: a dark deck between teal side rails at 0.85 m, six driven rollers and a drive box on one leg.
Low Poly Plaza Paving Square (Low Poly Character Figures)
Four metre paving square, 70 mm thick with a flat top. Lay it edge to edge for a continuous plaza floor.
AnimatedShowground Fence Gate (Travelling Circus and Big Top)
The same fence bay with its infill hung as a gate leaf on the left post, so a run of fence has a way through it. The leaf is one node on the hinge stile and swings clear of the run.
Showground Fence Panel (Travelling Circus and Big Top)
A 2.5 m fence bay: white pales on two red rails between capped timber posts, 1.15 m high. Run ports at both ends carry a fence right round a pitch.
Sawdust Ring Floor (Travelling Circus and Big Top)
The floor inside the kerb: a 8 m disc of raked sawdust 50 mm deep with four scuffed patches worn into it. Drop it inside a closed ring of kerb segments.