Free models · Game-ready GLB
Roads infrastructure
Every modern roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
246 free GLB models
Compressed air line 4 m (Underground Mine and Shaft Works)
A 4 m run of 180 mm compressed air pipe on wall brackets with bolted flanges, an isolating valve with a handwheel and a hose drop to a coupling.
Cable tray run 4 m (Underground Mine and Shaft Works)
A 4 m ladder cable tray on wall brackets carrying two power cables and a communications cable, with rung spacing and marker plates.
Ventilation duct run 4 m (Underground Mine and Shaft Works)
A 4 m run of 1.1 m rigid ventilation ducting with bolted flanges, roof hanger brackets and reflective marker plates.
Ventilation duct bend (Underground Mine and Shaft Works)
A quarter turn of 1.1 m ventilation ducting on the 2 m radius grid, with flanges at both ends and two hanger brackets.
Narrow gauge turnout (Underground Mine and Shaft Works)
A 4 m turnout panel with point blades, a stretcher bar, a hand throw stand with a target and a short diverging spur leaving to the east.
Narrow gauge track curve (Underground Mine and Shaft Works)
A quarter turn of 750 mm gauge track on the same 4 m radius as the drift curve, with radial sleepers and a two part rail section.
Narrow gauge track panel 4 m (Underground Mine and Shaft Works)
A 4 m panel of 750 mm gauge track: a ballast bed, timber sleepers on 0.6 m centres and flat bottom rail with the rail head 0.28 m above the drift floor.
Aisle keep clear chevron tile (Hardware Store and DIY Warehouse)
A 2.0 m square keep clear tile: a painted chevron arrow inside a bordered box, marking the clear zone in front of a loading door or a fire point.
Aisle floor marking corner tile (Hardware Store and DIY Warehouse)
A 2.0 m square floor marking corner: the aisle edge line turns through 90 degrees with a radiused corner, plus a bay corner square and a stop bar.
Aisle floor marking tile (Hardware Store and DIY Warehouse)
A 2.0 m square painted floor marking tile: a sealed concrete slab with two 100 mm aisle edge lines and a hatched pedestrian margin, 6 mm proud of the slab face.
Pontoon Bridge Span (Tanks, Military Vehicles and Field Camp)
Floating bridge span on two pontoons with a steel deck.
Road Crater (Tanks, Military Vehicles and Field Camp)
Blast crater through a gravel road with a debris lip.
Concrete Barrier (Tanks, Military Vehicles and Field Camp)
Standard concrete traffic barrier with end lifting slots.
Helipad Marker (Tanks, Military Vehicles and Field Camp)
Gravel helipad with a painted circle, H and perimeter lights.
Bay Markings Tile (Hospital Wards and Clinic Operations)
Four metre ambulance bay floor tile: a paved slab with painted bay lines, a hatched keep-clear zone, a stop bar and a coloured standing box.
Greybox cable tray run 4 m (Modular Greybox Architecture Kit)
A 4 m ladder-type cable tray 0.4 m wide: two side rails, thirteen rungs, two threaded-rod ceiling hangers and a bolted splice plate at each end.
Greybox service riser duct 3 m (Modular Greybox Architecture Kit)
A 3 m vertical service riser: 0.6 m by 0.4 m duct with bolted flanges top and bottom, a bolted access panel and a wall bracket.
Race start pontoon and gantry (Speedboats, Powerboat Racing and Marina)
Race start pontoon and gantry with original generic marine construction.
Floating fuel dock (Speedboats, Powerboat Racing and Marina)
Floating fuel dock with original generic marine construction.
Floating dock corner (Speedboats, Powerboat Racing and Marina)
Floating dock corner with original generic marine construction.
Floating dock 2 by 4 m (Speedboats, Powerboat Racing and Marina)
Floating dock 2 by 4 m with original generic marine construction.
Narrow ramp-side finger dock (Speedboats, Powerboat Racing and Marina)
Narrow ramp-side finger dock with original generic marine construction.
Concrete 8 m launch ramp (Speedboats, Powerboat Racing and Marina)
Concrete 8 m launch ramp with original generic marine construction.
Harbor Building Quay (Fishing Harbour and Boats)
8 × 4 m building platform with six banded piles, chamfered decking and an offset 1.8 m pier connection.