Free models · Game-ready GLB
Roads infrastructure
Every historical roads infrastructure below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.
92 free GLB models
Wrestling Pit Kerb Run (Roman Bathhouse and Palaestra)
A 2 m kerb run for the edge of a wrestling pit: a tufa kerb with a travertine capping, timber pegs behind it and the sand banked up on the court side. Runs butt end to end round a sand pit or between the court and the paving.
Drain Channel Run (Roman Bathhouse and Palaestra)
A 2 m drain channel run: a mortar trough between travertine kerbs, 320 mm high and 560 mm wide, open along its length for the overflow off a pool or a wash down floor. Runs butt end to end.
Lead Pipe Run (Roman Bathhouse and Palaestra)
A 2 m run of folded lead water pipe on two travertine saddles, 150 mm in the bore, with a soldered seam along the top, bronze collars at both joints and a strap at each bearing. Runs butt end to end along a wall or a trench.
Drain Channel Run with Grate (Roman Bathhouse and Palaestra)
The same 2 m channel closed with a bronze bar grate on a lead frame, which is what a bather walks over. Same channel ports, so grated and open lengths run together.
Cobbled Street Module (Canal Town and Windmill)
Free 3D model of a cobbled street tile for a historical canal town kit: 4 m square of sunk granite setts on a bedding slab with a gutter channel.
Canal Duckboard Walkway (Canal Town and Windmill)
Free 3D model of a duckboard walkway module for a historical canal town kit: 3 m of planking on three bearers with edge rails.
AnimatedCanal Quay Crane (Canal Town and Windmill)
Free 3D model of a timber post crane for a historical canal quay kit: stone base, oak post and a braced jib with a sheave, hook and winch drum that slew together.
Canal Fender Piles (Canal Town and Windmill)
Free 3D model of canal fender piles with a rubbing timber for a historical quayside kit: three driven oak piles, iron hoops and three rope fenders.
AnimatedCanal Drawbridge (Canal Town and Windmill)
Free 3D model of a flat drawbridge with a counterweight beam for a historical canal town kit: the leaf lifts and the weighted balance beam swings with it.
AnimatedCanal Lock Gate Pair (Canal Town and Windmill)
Free 3D model of a mitred canal lock gate pair for a historical waterway kit: two planked oak leaves on heel posts with balance beams, both swinging.
Canal Stepped Landing (Canal Town and Windmill)
Free 3D model of a stepped stone canal landing for a historical canal town kit: seven treads down the quay face into the water, iron handrails and a mooring ring.
Canal Humpback Bridge (Canal Town and Windmill)
Free 3D model of a humpback brick canal bridge for a historical canal town kit: 10 m segmental arch with a stone voussoir ring, cobbled deck and brick parapets.
Canal Quay Edge (Canal Town and Windmill)
Free 3D model of a brick canal quay edge with mooring rings and a bollard for a historical canal town kit: 4 m module with a stone coping.
Jetty Deck Module (Lighthouse and Rocky Coast)
Timber jetty in 6 m bays: four driven piles, cross bracing, a twelve board deck 2.4 m wide at the land datum and an iron handrail down each side. End ports run bays out over the water.
Slipway (Lighthouse and Rocky Coast)
Stone slipway as a 6 m ground module: the top falls from the land datum to the waterline, with low side walls, nine timber sleepers across it and a pair of iron rails for a boat trolley.
Stepping Stone Path (Imperial China Palace and Garden)
A run of seven irregular stepping stones set into gravel, 4 m long, for crossing a planted bed or the shallow edge of a pond.
Courtyard Paving Module (Imperial China Palace and Garden)
A 4 m square of courtyard paving: large dressed slabs with recessed joints and a worn stone finish, laid to a four way grid.
Terrace Step Flight (Imperial China Palace and Garden)
A five tread stone flight rising 1.15 m to terrace level, with a carved spirit ramp of abstract cloud scrolls between two runs of treads.
Terrace Platform Module (Imperial China Palace and Garden)
A 4 m square of raised stone terrace with a moulded plinth edge, for building a hall podium of any size.
Arched Stone Bridge (Imperial China Palace and Garden)
A single span humpbacked stone bridge with a voussoir arch, a stepped deck over it and a pierced balustrade down both parapets.
Cast mooring bollard (Steampunk Airship Dock and Workshop)
A 0.76 m cast bollard on a bolted plate, with a coil of rope at its foot.
Steel stair flight 2 m rise (Steampunk Airship Dock and Workshop)
A steel stair flight rising 2.0 m over a 2.4 m run, with chequer treads and handrails.
Caged access ladder (Steampunk Airship Dock and Workshop)
A 3.4 m caged access ladder with twelve rungs and bolted top and bottom plates.
Wheeled boarding stair (Steampunk Airship Dock and Workshop)
A wheeled boarding stair with eleven treads, twin handrails and a railed top platform at 2.5 m.