Free models · Game-ready GLB
Props
Every low-poly modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
655 free GLB models
AnimatedSpotting Scope on a Tripod (Safari Camp and Bush Lodge)
A 1.45 m spotting scope on a timber tripod: a straight body with an objective bell, an eyepiece, a focus wheel and a pan arm. The scope and head are one node and pan on the clip; the focus wheel does not turn.
Field Desk with Binoculars and Map (Safari Camp and Bush Lodge)
A 1.3 by 0.66 m folding timber field desk with a pair of binoculars, a notebook, a pen tray and a map sheet laid out on it. The map is abstract: blocks and a single track line, no real place and no lettering. Static geometry.
Rifle Case Rack with Closed Cases (Safari Camp and Bush Lodge)
A 1.5 by 1.35 m timber rack carrying four closed, latched hard cases on two shelves, as a camp store stands between drives. The cases are plain boxes with catches and a handle; none is open and no contents are modelled. A blank tally card hangs on the frame.
AnimatedCamera on a Tripod (Safari Camp and Bush Lodge)
A 1.65 m camera tripod with braced legs, a pan head and a generic long lens camera on it. The head, arm and camera are one node and pan on the clip; the legs do not extend.
Camp Radio Set on a Table (Safari Camp and Bush Lodge)
A 1.1 by 0.6 m timber table with a boxed HF transceiver on it: speaker grille, two dials, a handset on its cradle, a clamped whip aerial and a blank log sheet beside it. No lettering or markings anywhere. Static geometry.
Jerrycan Rack (Safari Camp and Bush Lodge)
A 1.35 m steel rack holding three 20 litre jerrycans on a raised tray, 0.72 m to the top rail. Cans are plain pressed shapes with cap and handle, no markings of any kind. Static geometry.
Header Tank on Timber Stand (Safari Camp and Bush Lodge)
A 1.0 m galvanised header tank on a braced timber stand 2.6 m high, with a hatch on top and a fall pipe down one leg, which is how a camp gets pressure to its showers. Static geometry; no water is modelled.
AnimatedSkid Mounted Water Bowser (Safari Camp and Bush Lodge)
A 2.2 m water bowser: a 1.1 m diameter tank in two steel cradles on a towable skid with a hitch, a filler hatch on top and an outlet with a gate tap at the back. The tap handle is one node and turns on the clip; the water is not modelled.
AnimatedCamp Battery Box (Safari Camp and Bush Lodge)
A 0.9 by 0.6 m vented steel battery box on a timber pallet base, 0.58 m high, with side handles, a cable gland on the front and a lid hinged along the back. The lid is one node and lifts on the clip.
Solar Panel on Ground Frame (Safari Camp and Bush Lodge)
A 1.7 by 1 m solar panel on a galvanised ground frame, tilted 24 degrees on four feet, with three busbars across the cell face and a cable run off the low edge. Static geometry: the frame has no tracker.
Storm Lantern Set (Safari Camp and Bush Lodge)
Three galvanised storm lanterns of different sizes standing together, the tallest 0.44 m to the top of its handle, with glass chimneys in warm lamp colour. The glow is emissive material, not a light: the GLB embeds no lights.
Camp Dining Table and Chairs (Safari Camp and Bush Lodge)
A 2.2 by 1.1 m slatted timber dining table 0.76 m high laid with a runner, two lanterns and four plates, with four folding camp chairs round it. Stands under a tree or an awning. Static geometry; the chairs are modelled in place.
Folding Camp Chair (Safari Camp and Bush Lodge)
A crossed leg timber camp chair with a canvas seat and back and two flat arms, 0.58 m wide and 0.86 m to the top of the back. Static geometry: a folding chair folds on four joints and a rigid node cannot give them.
Paraffin Table Lamp (Safari Camp and Bush Lodge)
A 0.64 m paraffin lamp with a pressed steel reservoir, a knurled wick wheel on a short spindle, a warm glass chimney and a flared shade. The flame colour is emissive material only; the file embeds no lights. Static geometry.
Camp Kitchen Prep Table (Safari Camp and Bush Lodge)
A 1.6 by 0.7 m slatted timber prep table 0.88 m high with a lower shelf, a steel bowl and a chopping board on the top and two crates of dry stores underneath. Static geometry.
AnimatedCamp Drinks Cooler (Safari Camp and Bush Lodge)
A 0.86 by 0.5 m hard cool box 0.54 m high with moulded side handles, a front latch and a lid hinged along its back edge. The lid is one node and lifts on the clip.
Camp Water Filter Stand (Safari Camp and Bush Lodge)
A 1.15 m four legged timber stand carrying a galvanised gravity filter with a short outlet tap, a canvas bucket underneath and a cloth hung on the front rail. Static geometry.
Firewood Stack (Safari Camp and Bush Lodge)
A 1.6 m stack of thirty cut logs between two timber stakes, 0.85 m high, the way a camp keeps its wood dry beside the fire. Static geometry.
Fireside Log Seat (Safari Camp and Bush Lodge)
A 1.5 m split log seat: a squared log on two chocks with a flattened top, set round a fire. Static geometry.
Camp Fire Pit and Stone Ring (Safari Camp and Bush Lodge)
A 2.8 m camp fire: a scraped earth pan edged with eleven boulders, a bed of ash and charcoal, five half burnt logs stacked over it and a low flame. The flame is solid emissive geometry and does not move: fire needs a shader, not a rigid node.
Camp Bed with Mosquito Net Frame (Safari Camp and Bush Lodge)
A 1 by 2 m canvas camp bed on splayed timber legs with a rolled blanket and a pillow, standing inside a 1.5 m steel net frame with the mosquito net gathered into a valance under the top rail and tied back at the corners. The netting is solid geometry and does not move.
Canvas Wash Stand and Jug (Safari Camp and Bush Lodge)
A 0.78 m tented bathroom wash stand: a canvas basin slung in a timber ring on a three legged frame, with a galvanised jug beside it and a towel over the lower rail. The canvas and the towel are modelled solid and stated as static.
Visitor Information Board (Radio Telescope Array and Field Station)
The information board at the station entrance: a wide panel on two posts under a weather hood, with blank inset panels where a site plan and notices would be fixed.
Windsock Mast (Radio Telescope Array and Field Station)
A four metre windsock mast with the sock flying from its hoop, the wind reference for a remote plot and its helicopter pad.