Free models · CC0
Props
Every prop below is a self-contained .glb under 25 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
5,496 free GLB models
AnimatedBack bar mirrored bay (Bar, Pub and Brewery Taproom)
A back bar bay built around a tall framed mirror: a panelled base cabinet with fielded doors, a bullnose worktop, a moulded mirror frame, a single display shelf with a brass gallery rail and a moulded cornice above.
AnimatedBack bar bottle steps bay (Bar, Pub and Brewery Taproom)
A full height back bar bay of bottle steps: a panelled base cabinet with fielded doors and brass knobs, a bullnose worktop, four stepped display tiers with moulded nosings and brass gallery rails against a mirrored back, framed by turned pilasters under a moulded cornice.
Keg sack barrow (Bar, Pub and Brewery Taproom)
A cellar sack barrow for kegs: a tube frame with sleeved grips, three cross braces, a folded toe plate, stair skids and two pneumatic wheels.
Keg coupler head (Bar, Pub and Brewery Taproom)
A keg coupler head: a cast body with a bayonet collar, a probe, a hinged lever handle and gas and beer barbs on their elbows.
Recirculation beer cooler (Bar, Pub and Brewery Taproom)
A flooded recirculation beer cooler: an insulated tub with a lifting lid, the compressor and pump head on top, a lagged flow and return elbow and a membrane control panel.
Line cleaning bottle (Bar, Pub and Brewery Taproom)
A pressurised line cleaning bottle: a moulded stainless body with a strap handle and screw cap, a plain blank collar band and a coupler hose falling to the floor.
AnimatedCellar cooler unit (Bar, Pub and Brewery Taproom)
A wall-hung cellar cooling unit: a stainless case with two guarded fans and bladed impellers, a louvred return grille, insulated pipework rising from the top, a control fascia and a hinged access door.
Gas cylinder rack (Bar, Pub and Brewery Taproom)
A cellar gas rack: a base tray with a raised lip, two uprights and a head rail, two carbon dioxide cylinders with shoulder valves and handwheels, and two retaining chains across them.
Python cooler line coil (Bar, Pub and Brewery Taproom)
A coiled insulated python: a lagged trunk sheath in three turns with taped clamps, cut open at one end to show six product lines around the coolant flow and return.
Thirty litre keg (Bar, Pub and Brewery Taproom)
A 30 litre stainless keg on the same construction as the 50 litre: rolled chimes, handle webs, a bilged body and a recessed spear well, at the shorter cellar height.
Pin cask (Bar, Pub and Brewery Taproom)
A pin cask on the same staved construction as the firkin: bilged body, four hoops, shive and keystone, at half the length.
Fifty litre keg (Bar, Pub and Brewery Taproom)
A 50 litre stainless keg: rolled top and bottom chimes with handle webs, a bilged body with a rolled mid rib, and a recessed neck well with an extractor spear valve.
Firkin cask (Bar, Pub and Brewery Taproom)
A timber firkin lying on its side: a staved bilged body with four steel hoops, flat heads, a shive bung on the crown and a keystone boss in the end head.
Two tier cask stillage (Bar, Pub and Brewery Taproom)
The cask stillage in a two tier configuration: a second cradle deck 420 mm above the first on continued uprights, for stacking casks in a working cellar.
Single hand pull (Bar, Pub and Brewery Taproom)
A single cask hand pull: bar-top C-clamp, polished barrel, swan-neck spout, long curved lever with a ball grip and a blank pump clip, over its own drip tray.
Cask stillage frame (Bar, Pub and Brewery Taproom)
A 1.2 m steel cask stillage: two cradle rails on box-section legs with diagonal braces, four vee chocks that hold a cask level, and rubber floor pads.
Hand pull set of three (Bar, Pub and Brewery Taproom)
Three cask hand pulls on the bar top: each a chrome C-clamp gripping the bar, a polished barrel with a beaded shoulder, a swan-neck spout, a long curved lever on a bearing yoke ending in a turned ball grip, and a blank oval pump clip on its bracket. Drip tray in front.
Six tap T bar font (Bar, Pub and Brewery Taproom)
A T bar dispense font: a lathed chrome post on a stepped base carrying a horizontal cross tube with domed end caps and six cast taps with blank clip holders, over a 780 mm drip tray.
Single tap font (Bar, Pub and Brewery Taproom)
A slim single tap font: a lathed 110 mm column on a stepped base with one cast tap and a turned handle over a small slotted drip tray.
AnimatedUnder-bar till drawer unit (Bar, Pub and Brewery Taproom)
A 460 mm under-bar cash drawer unit: a stainless case on short feet, a sliding drawer with a recessed pull, a lock barrel and four coin trays visible through the top opening.
AnimatedUndercounter ice maker (Bar, Pub and Brewery Taproom)
A 560 mm undercounter ice maker: a machine head with a louvred condenser over an insulated bin behind a lift-up door, with a punched vent band and a status lamp strip.
Eight tap keg font (Bar, Pub and Brewery Taproom)
An eight tap keg font: a taller lathed column carrying two tiers of four cast taps with turned handles, on a stepped base with a wide slotted drip tray.
Four tap keg font (Bar, Pub and Brewery Taproom)
A four tap keg font: a stepped chrome base, a lathed swelling column and four individually cast taps splayed around the front arc with turned handles, over a slotted drip tray.
Stacking glass crate (Bar, Pub and Brewery Taproom)
A moulded stacking glass crate: a slotted 400 mm skirt with a stacking lip, a four by four divider grid and recessed hand grips on two sides.