Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
Condiment set (Retro Diner and Roadside Motel)
The caddy that sits by the napkins: a chrome tray with a coral squeeze bottle, a pale one and a pair of glass shakers with stainless tops. The bottles carry no label of any kind.
Napkin dispenser (Retro Diner and Roadside Motel)
The stainless napkin dispenser that lives on every counter and booth table: a 170 mm chrome box with a folded stack showing through both open faces and a pale napkin standing proud of the top slot.
Coat hook run (Retro Diner and Roadside Motel)
A 1.2 m coat hook board for the wall by the door: an enamel board with a chrome pinstripe and five ball ended stainless hooks. Mount it at about 1.7 m; the origin is on the board base, so it sits where it is placed.
AnimatedJukebox (Retro Diner and Roadside Motel)
A floor standing jukebox: a dark plinth, a turquoise cabinet with a blank glazed title window, a stepped coral crown and neon tubes arched over it and down both pilasters. The title selector is a named node that turns. Every label strip is blank.
Diner wall clock (Retro Diner and Roadside Motel)
A 480 mm chrome cased wall clock with a blank cream dial, twelve dark batons instead of numerals and a coral minute hand. The dial carries no wording or maker. Built facing +Z with the case back at the wall, for mounting at about 2.2 m.
Booth seat pair and table (Retro Diner and Roadside Motel)
A complete booth: two coral vinyl benches facing each other with padded backs and chrome capping rails, and a pedestal table between them with a pale laminate top and a stainless nosing. 1.6 m wide, seating four, the table 720 mm to its surface.
AnimatedCounter end stool with back (Retro Diner and Roadside Motel)
The stool at the end of the run, where a back is worth having: the same foot, post and footring under a coral seat with a low chrome framed backrest. Seat and back are one named node and turn together.
AnimatedCounter stool (Retro Diner and Roadside Motel)
A fixed counter stool: a weighted chrome foot, a single post with a footring and a coral vinyl seat pad on a stainless rim, 740 mm to the seat. The pad is a named node on the post axis and turns as a real stool does.
Counter run with chrome edge (Retro Diner and Roadside Motel)
A 2 m bay of diner counter: a turquoise front with a dark toe recess and a chrome kick band, a pale worktop 960 mm to its surface with a full length stainless bullnose, and a low back shelf on the service side. Run the bays end to end.
Buoy rack (Fish Market and Trawler Quay)
A steel rack of marker gear: four dan buoys with their staffs and flags in the rack's hoops, three spare floats on the lower rail and a bolted foot each end.
Net mending frame (Fish Market and Trawler Quay)
The frame a net is mended on: two raking steel posts on foot plates, a timber head bar and a lower rail, a lattice panel of net laced across them and a needle box on the ground.
Net pile with floats (Fish Market and Trawler Quay)
A trawl net heaped on the quay: overlapping folds of solid netting about 3 m across with float clusters worked through it, a coil of line beside it and a ring of leadline on the ground.
Lobster and crab holding tank (Fish Market and Trawler Quay)
A glazed holding vivier on a stainless frame: a 2.2 m tank with a water level worked into it, a mesh lid on its corner posts and a pump and chiller stack with its pipe run at one end. The tank is empty of livestock.
Single creel (Fish Market and Trawler Quay)
One parlour creel on its own, for dressing a corner or laying a run along a quay edge without a whole stack.
Creel stack (Fish Market and Trawler Quay)
Four parlour creels stacked as they come off a boat: timber base frames with weighted bars, bowed steel hoops, a netted shell over each and a marker toggle, each pot turned a little on the one below.
Bait barrel (Fish Market and Trawler Quay)
A coopered timber barrel with three steel hoops and a bellied stave profile, its lid leaning against it, as bait and salt are kept on a working quay.
Wash down point (Fish Market and Trawler Quay)
The quayside wash down station: a standpipe with its valve and blank gauge head, a lance in its clip, a hose tail and a bunded drain surround with a stainless grating.
AnimatedWall hose reel (Fish Market and Trawler Quay)
A wall mounted wash down hose reel: a bracket plate and spindle carrying a drum wound with hose, a crank handle and the lead off to the standpipe. The drum is rigged to turn.
AnimatedOffal bin on castors (Fish Market and Trawler Quay)
A wheeled waste bin with tapered sides, a reinforcing rib, four castors and a blank hazard panel, with a lid hinged along its back edge that lifts.
Gutting table (Fish Market and Trawler Quay)
A 2.4 m stainless gutting table falling toward a waste hole and its stub chute, with a rinse manifold and jets along the back upstand, side and back walls and two boards on the deck.
Pallet stack (Fish Market and Trawler Quay)
Six timber pallets stacked and strapped: full boards, bearers and bottom deck boards on each, with a strap over the top one. The thing every box on the quay ends up on.
Fish box stack, blue (Fish Market and Trawler Quay)
The same six box stack in the second moulding colour, for breaking up a row of stacks along a quay.
Fish box stack (Fish Market and Trawler Quay)
Six empty fish boxes nested and stacked as they wait at the back of a stall: 1.2 m of boxes with their lugs interlocked and every stencil panel blank.
Filleting bench with a board (Fish Market and Trawler Quay)
The bench a trader works at: a stainless top with an upstand and an undershelf, a poly cutting board let into it, a rinse trough with a swan neck tap, a waste chute through the deck and knives resting on the board rail.