Free models · Game-ready GLB
Props
Every prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
12,782 free GLB models
External experiment platform (Space Station and Docking Bays)
A 2 by 1.2 m external payload platform on standoff feet: a slatted deck with tie rails, a small telescope tube, a sample exposure tray with a lid on a named hinge node, an avionics box with a radiator fin and an EVA rail.
Mobile base cart (Space Station and Docking Bays)
A 3.6 m mobile base that translates along a truss rail: a rail beam with four named roller nodes, a blanketed carriage, a grapple fixture, avionics boxes, a portable foot restraint plate and two EVA rails.
S-band boom antenna (Space Station and Docking Bays)
A 2.1 m S-band communications antenna: a bolted base, an angled mast, a circular ground plane and a four-arm helix wound about the feed rod with a radome cap and an avionics box.
High gain antenna dish (Space Station and Docking Bays)
A 2.3 m steerable high gain antenna: a bolted base, a two-axis gimbal on named azimuth and elevation nodes, a parabolic reflector with a stiffening rim and a feed horn on three struts.
Robotic grapple fixture (Space Station and Docking Bays)
A 0.7 m flight releasable grapple fixture: a bolted base plate, a target ring, a central grapple pin with three capture ramps and a yellow alignment label for the arm camera.
Dexterous two-arm manipulator (Space Station and Docking Bays)
A 3.4 m dexterous manipulator: a grapple body with a rolling torso node, a shoulder beam carrying two three-joint arms with parallel-jaw grippers, a stereo camera head and two tool holsters.
Latching end effector (Space Station and Docking Bays)
A 1 m robotic end effector: a bolted interface plate, a blanketed barrel, an electrical connector face and a rotating snare ring carrying three capture cables, with a camera and two work lights.
Station manipulator arm (Space Station and Docking Bays)
An 11 m six-joint station manipulator posed mid-reach: a latching base platform with a grapple fixture, two blanketed booms with cable conduits, six named joint nodes, an elbow camera with work lights and a snare end effector.
Hinged hatch cover (Space Station and Docking Bays)
A 2 m hatch cover assembly: a bolted seat ring with a sealed face and six latch blocks, and a domed insulated cover swung fully open on a named hinge node carried by two support links.
Docking target cross (Space Station and Docking Bays)
A 0.9 m docking alignment target: a bolted base plate on four braces carrying a framed board with a raised black cross and ring, and a centre standoff pin with a yellow cap for the approach camera.
Common berthing mechanism (Space Station and Docking Bays)
A 2.5 m passive berthing ring: a bolted flange with sixteen powered bolts, four capture latch housings with their striker plates, four alignment guides and a sealed hatch face.
Androgynous docking port (Space Station and Docking Bays)
A 2.1 m androgynous docking mechanism: a bolted base flange with a station hatch port at the rear, an active capture ring with three guide petals, four latch housings and a target patch.
Extended soft capture ring (Space Station and Docking Bays)
A 2 m soft capture ring shown extended on six linear actuators: a fixed base flange, telescoping struts with damper bodies, the capture ring with a yellow contact band and three alignment blocks.
EVA handrail run (Space Station and Docking Bays)
A 2.2 m external handrail run on a mounting strip: two yellow translation rails on machined standoffs, a base plate with a blanket patch and a marked worksite label.
Lamp room tally board (Underground Mine and Shaft Works)
A timber tally board with three rows of numbered hooks and brass check tags, a header label and a lower shelf.
Drill steel rack (Underground Mine and Shaft Works)
A steel rack of seven drill rods with thread protectors, a shelf of button bits and a stencilled length label.
Mine warning sign (Underground Mine and Shaft Works)
A hazard sign on a steel post in a concrete foot, with a hatched border, a text panel and a smaller instruction plate below.
Blasting wire spool (Underground Mine and Shaft Works)
A wooden cored spool of shot firing wire on a folding steel stand, with a carrying handle and a loose lead.
Mine timber stack (Underground Mine and Shaft Works)
A cross stacked pile of sawn mine timber on bearers, strapped with steel banding and covered by a tarpaulin sheet, with a stock label.
Ore sample tray (Underground Mine and Shaft Works)
A partitioned timber sample tray holding twenty broken ore fragments with numbered labels along the front rail.
Explosives day box (Underground Mine and Shaft Works)
A lockable steel explosives day box with a hinged lid, edge banding, a hasp, a timber base and a hazard label.
Survey station and tripod (Underground Mine and Shaft Works)
A survey tripod carrying a total station over a floor spad, with a tribrach, adjustable legs, foot spikes and a marker plate.
Belt worn self rescuer (Underground Mine and Shaft Works)
A belt worn self rescuer: a sealed steel canister in a carrier with a banded seal, a release catch, an instruction label and a belt strap.
Hard hat with cap lamp (Underground Mine and Shaft Works)
A mine hard hat with a lamp bracket, a cap lamp, a coiled cord and a belt mounted battery pack.