Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
AnimatedCamp Drinks Cooler (Safari Camp and Bush Lodge)
A 0.86 by 0.5 m hard cool box 0.54 m high with moulded side handles, a front latch and a lid hinged along its back edge. The lid is one node and lifts on the clip.
Camp Water Filter Stand (Safari Camp and Bush Lodge)
A 1.15 m four legged timber stand carrying a galvanised gravity filter with a short outlet tap, a canvas bucket underneath and a cloth hung on the front rail. Static geometry.
Firewood Stack (Safari Camp and Bush Lodge)
A 1.6 m stack of thirty cut logs between two timber stakes, 0.85 m high, the way a camp keeps its wood dry beside the fire. Static geometry.
Fireside Log Seat (Safari Camp and Bush Lodge)
A 1.5 m split log seat: a squared log on two chocks with a flattened top, set round a fire. Static geometry.
Camp Fire Pit and Stone Ring (Safari Camp and Bush Lodge)
A 2.8 m camp fire: a scraped earth pan edged with eleven boulders, a bed of ash and charcoal, five half burnt logs stacked over it and a low flame. The flame is solid emissive geometry and does not move: fire needs a shader, not a rigid node.
Camp Bed with Mosquito Net Frame (Safari Camp and Bush Lodge)
A 1 by 2 m canvas camp bed on splayed timber legs with a rolled blanket and a pillow, standing inside a 1.5 m steel net frame with the mosquito net gathered into a valance under the top rail and tied back at the corners. The netting is solid geometry and does not move.
Canvas Wash Stand and Jug (Safari Camp and Bush Lodge)
A 0.78 m tented bathroom wash stand: a canvas basin slung in a timber ring on a three legged frame, with a galvanised jug beside it and a towel over the lower rail. The canvas and the towel are modelled solid and stated as static.
Visitor Information Board (Radio Telescope Array and Field Station)
The information board at the station entrance: a wide panel on two posts under a weather hood, with blank inset panels where a site plan and notices would be fixed.
Windsock Mast (Radio Telescope Array and Field Station)
A four metre windsock mast with the sock flying from its hoop, the wind reference for a remote plot and its helicopter pad.
Warning Sign (Radio Telescope Array and Field Station)
A freestanding warning sign at the station boundary: a red bordered board with a blank face on a braced post and a small footing.
Floodlight Mast (Radio Telescope Array and Field Station)
A six metre floodlight mast carrying three tilted lamp heads on a crossarm, with the control box at the foot, for lighting the yard on a night shift.
Survey Marker (Radio Telescope Array and Field Station)
A survey marker post: a small concrete footing, a steel post with a blank red plate and the levelling disc on top.
Service Ladder (Radio Telescope Array and Field Station)
A three metre aluminium service ladder with rubber feet and hooked top rails, leant against a cabin or a tank while work is going on.
Ladder Safety Cage (Radio Telescope Array and Field Station)
A caged climbing ladder section: four metres of rungs inside six back hoops on their longitudinal stringers, the fall protection on a mast or a tank stand.
AnimatedPerimeter Gate (Radio Telescope Array and Field Station)
The vehicle gate in the perimeter fence: two mesh leaves on their own hinge posts under a head rail, each swinging out of the opening on its own node.
Perimeter Fence Run (Radio Telescope Array and Field Station)
A four metre welded mesh fence panel on its own footings, with top and bottom rails, ported left and right so a perimeter is as long as the plot needs.
Septic Tank Cover (Radio Telescope Array and Field Station)
The lid of the buried septic tank: a concrete surround with a sealed access cover, a lifting eye and the vent pipe rising beside it.
AnimatedSpares Rack (Radio Telescope Array and Field Station)
The spares rack from the store: an open steel frame of four shelves with three shallow drawers that pull out and blank part boxes stood on the top shelf.
Supply Crate Stack (Radio Telescope Array and Field Station)
A stack of banded supply crates on a pallet, with two more set down beside it: the delivery a remote station runs on, in blank white and grey cases.
Water Tank on Stand (Radio Telescope Array and Field Station)
The station water supply: a braced steel stand carrying a domed tank at three metres, with a climbing ladder, a down pipe and the pump box at the foot.
AnimatedAll Sky Camera Dome (Radio Telescope Array and Field Station)
The all sky camera on its cabinet: a weatherproof base with the equipment door on the front and a rotating dome with a dark window that turns on its own node.
GPS Reference Pillar (Radio Telescope Array and Field Station)
A survey grade reference pillar: a cast monument on a spread footing with a forced centring plate, the antenna and its choke ring on top and a receiver box on the shaft.
Tipping Bucket Rain Gauge (Radio Telescope Array and Field Station)
A tipping bucket rain gauge on a short post: the collecting funnel in its housing, the logger box on the post and a small concrete footing.
AnimatedWeather Mast with Anemometer (Radio Telescope Array and Field Station)
A five metre lattice weather mast carrying a three cup anemometer that turns on its own node, a radiation shielded temperature probe and the logger box at the foot.